Brownells Iberica - El mayor proveedor de accesorios para el Tiro, Piezas y herramientas del armero. España

SINCLAIR INTERNATIONAL
SINCLAIR BENCH MOUNT SCOPE STAND

050806110939 749007844
Our bench spotting scope stand employs two large clamping plates to lock the stand securely to the bench. A bench thickness of one fourth inch to 12 inches is easily accommodated. The scope mounting head moves smoothly up and down on the 18 inch stainless steel shaft for proper scope height adjustment. The head locks in place with a comfortable knob and contoured locking piece. The scope mounting head incorporates a double spring loaded adjusting mechanism which permits easy target acquisition. The scope mounting surface is designed to mount one fourth to 20 threaded scopes with a mating surface of 1 to three fourths by 2 to one fourth inch or less (almost all field and spotting scopes with threaded mounts). We usually mount the scope to the left side of the bench so all we have to do is move our head off the riflescope to view the results of our shooting. If you shoot off the bench using open sights or lower powered scopes, this is a piece of equipment that puts your spotting scope to great use.
249.9 249.9 1 EUR
N.º de producto: 749007844
SINCLAIR INTERNATIONAL SPOTTING SCOPE BENCH MOUNT STAND
Ref Fabricante: 063200 050806110939 Nuestro soporte para telescopios de observaci\u00f3n de banco utiliza dos grandes placas de sujeci\u00f3n para asegurar firmemente el soporte al banco. Se puede acomodar f\u00e1cilmente un grosor de banco de un cuarto de pulgada hasta 12 pulgadas. La cabeza de montaje del telescopio se mueve suavemente hacia arriba y hacia abajo en el eje de acero inoxidable de 18 pulgadas para ajustar la altura adecuada del telescopio. La cabeza se bloquea en su lugar con un pomo c\u00f3modo y una pieza de bloqueo contorneada. La cabeza de montaje del telescopio incorpora un mecanismo de ajuste de doble resorte que permite una f\u00e1cil adquisici\u00f3n del objetivo. La superficie de montaje del telescopio est\u00e1 dise\u00f1ada para montar telescopios roscados de un cuarto a 20 con una superficie de acoplamiento de 1 a tres cuartos por 2 a un cuarto de pulgada o menos (casi todos los telescopios de campo y observaci\u00f3n con monturas roscadas). Normalmente montamos el telescopio en el lado izquierdo del banco, as\u00ed que todo lo que tenemos que hacer es mover nuestra cabeza fuera del visor para ver los resultados de nuestro tiro. Si disparas desde el banco usando miras abiertas o visores de menor potencia, este es un equipo que pone tu telescopio de observaci\u00f3n en gran uso.
249.9 EUR 0 249,90 € *
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Caracteristicas: Tipo: Stand

Atributos

Tipo: Stand Peso de entrega: 1,565kg Altura de envío: 112mm Ancho de envío: 112mm Longitud de envío: 564mm

Detalles del artículo

Hecho en USA



Our bench spotting scope stand employs two large clamping plates to lock the stand securely to the bench. A bench thickness of one fourth inch to 12 inches is easily accommodated. The scope mounting head moves smoothly up and down on the 18 inch stainless steel shaft for proper scope height adjustment. The head locks in place with a comfortable knob and contoured locking piece. The scope mounting head incorporates a double spring loaded adjusting mechanism which permits easy target acquisition. The scope mounting surface is designed to mount one fourth to 20 threaded scopes with a mating surface of 1 to three fourths by 2 to one fourth inch or less (almost all field and spotting scopes with threaded mounts). We usually mount the scope to the left side of the bench so all we have to do is move our head off the riflescope to view the results of our shooting. If you shoot off the bench using open sights or lower powered scopes, this is a piece of equipment that puts your spotting scope to great use.
Newsletters