CNC-machined, steel, rear sight with Novak’s famous, low-profile design and the added versatility of elevation and windage adjustments. Set screw allows drift adjustment for windage; elevation screw positively stops and audibly clicks for easy fine-tuning. Smooth, contoured edges have less chance of catching or snagging. Available in for Colt and SW1911 pistols.
Más...
Mira trasera de acero mecanizada con CNC, con el famoso diseño de perfil bajo de Novak y la versatilidad añadida de ajustes de elevación y deriva. Un tornillo de fijación permite el ajuste de deriva; el tornillo de elevación se detiene de manera positiva y hace clic audiblemente para un afinado fácil. Los bordes suaves y contorneados tienen menos probabilidades de engancharse o atascarse. Disponible para pistolas Colt y SW1911.
Más...
Evaluaciones de clientes para NOVAK REAR SIGHTS, WD FITS COLT
Número de evaluaciones: 4
De brownells.com: 4
Evaluación media: 2,8
Very Good Sight(16/10/2012)
I installed this sight on my Colt Combat Elite XSE 1911. It required some hand milling (1/8" wide) on the slide top and a little on the dovetails. It came with excellent instructions and diagrams on how to. I also installed the Novak fiber Optic front sight (662-000-040WD-.190"height) to complement this rear sight. It all works great and I love the sight picture, and for my aging eyes it is a great help. I highly recommend this sight!
RUN....do not walk....from this sight(04/12/2013)
This sight requires an extra mill cut in addition to standard novak dovetail.Once done,only this model will work without leaving extra cut exposed.Mounted this on a RUGER SR1911.Sight would not lower enough to zero even with .225 front installed.Called Novak,got nowhere.Disassembled sight and found elevation springs were too long and cut three coils off each,now it will lower.Sight notch is narrow,not like factory .145 on ruger.Sight guard horns (antlers) stick up and block target view.
poor quality(19/03/2017)
Mine became a 2 dot sight on day 2 at the range. how does a dot fall out??? Not cleaned before application I guess. tough to adjust low as mentioned before. I regret this purchase.
Not all colts(15/06/2018)
Ordered this as per novak..it will not fit a defender or any slide that is NOT flat on the top side..
Machining is required...
The part that is needed is sold ONLY by novak and you need to order it.
N.º de producto: 625000010 NOVAK REAR SIGHTS, WD FITS COLT Ref Fabricante: ALM02765595551503 Mira trasera de acero mecanizada con CNC, con el famoso diseño de perfil bajo de Novak y la versatilidad añadida de ajustes de elevación y deriva. Un tornillo de fijación permite el ajuste de deriva; el tornillo de elevación se detiene de manera positiva y hace clic audiblemente para un afinado fácil. Los bordes suaves y contorneados tienen menos probabilidades de engancharse o atascarse. Disponible para pistolas Colt y SW1911.
Color del punto de mira:
White
Estilo:
2-Dot,Low-Profile
Hacer:
1911
Modelo:
Government,Commander,Officers
Peso de entrega: 0,045kgAltura de envío: 1mmAncho de envío: 83mmLongitud de envío: 146mm
CNC-machined, steel, rear sight with Novak’s famous, low-profile design and the added versatility of elevation and windage adjustments. Set screw allows drift adjustment for windage; elevation screw positively stops and audibly clicks for easy fine-tuning. Smooth, contoured edges have less chance of catching or snagging. Available in for Colt and SW1911 pistols.
Más...
Mira trasera de acero mecanizada con CNC, con el famoso diseño de perfil bajo de Novak y la versatilidad añadida de ajustes de elevación y deriva. Un tornillo de fijación permite el ajuste de deriva; el tornillo de elevación se detiene de manera positiva y hace clic audiblemente para un afinado fácil. Los bordes suaves y contorneados tienen menos probabilidades de engancharse o atascarse. Disponible para pistolas Colt y SW1911.
Más...
Evaluaciones de clientes para NOVAK REAR SIGHTS, WD FITS COLT
Número de evaluaciones: 4
De brownells.com: 4
Evaluación media: 2,8
Very Good Sight(16/10/2012)
I installed this sight on my Colt Combat Elite XSE 1911. It required some hand milling (1/8" wide) on the slide top and a little on the dovetails. It came with excellent instructions and diagrams on how to. I also installed the Novak fiber Optic front sight (662-000-040WD-.190"height) to complement this rear sight. It all works great and I love the sight picture, and for my aging eyes it is a great help. I highly recommend this sight!
RUN....do not walk....from this sight(04/12/2013)
This sight requires an extra mill cut in addition to standard novak dovetail.Once done,only this model will work without leaving extra cut exposed.Mounted this on a RUGER SR1911.Sight would not lower enough to zero even with .225 front installed.Called Novak,got nowhere.Disassembled sight and found elevation springs were too long and cut three coils off each,now it will lower.Sight notch is narrow,not like factory .145 on ruger.Sight guard horns (antlers) stick up and block target view.
poor quality(19/03/2017)
Mine became a 2 dot sight on day 2 at the range. how does a dot fall out??? Not cleaned before application I guess. tough to adjust low as mentioned before. I regret this purchase.
Not all colts(15/06/2018)
Ordered this as per novak..it will not fit a defender or any slide that is NOT flat on the top side..
Machining is required...
The part that is needed is sold ONLY by novak and you need to order it.
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.