Contoured, serrated thumb pads feature a slight downward angle that lets your thumb contact the pad in a natural, sweeping motion. Provides a comfortable thumb position for shooters using a high-thumb hold. Rounded edges resist snagging, plus give minimal bulk on carry guns.
SPECS: CM steel, Blue, or stainless steel (SS), Single and Ambidextrous (Ambi). Thumb pad: .976" (24.8mm) long, .223" (5.6mm) wide. Gunsmith fitting required.
Más...
Almohadillas Serradas para un Desenganche Positivo
Almohadillas del pulgar contorneadas y serradas cuentan con un ligero ángulo descendente que permite que tu pulgar contacte con la almohadilla en un movimiento natural y amplio. Proporciona una posición cómoda del pulgar para tiradores que utilizan un agarre alto del pulgar. Los bordes redondeados resisten enganches, además de agregar un mínimo volumen en armas de porte.
ESPECIFICACIONES: Acero CM, azul o acero inoxidable (SS), para mano única y ambidiestro (Ambi). Almohadilla del pulgar: .976" (24.8mm) de largo, .223" (5.6mm) de ancho. Requiere ajuste por un armero.
Más...
Evaluaciones de clientes para STI Ambidextrous Extended Safety, SS
Número de evaluaciones: 10
De brownells.com: 10
Evaluación media: 3,9
Pleasant surprise(21/07/2009)
Dropped right in to the Taurus 1911 I was working on. Required no fitting or adjustment.
Fits in a PT1911 Perfectly NO FITTING(09/10/2009)
I received this safety and had read the previous review on brownells about how it dropped right into a PT1911. This was interesting to me because I thought ALL safeties needed fitting. Well i received the part. The part is well made and almost looks exactly like the stock PT1911 safety, except it is single sided. Well, I just want to confirm... this safety DOES NOT require fitting for a Taurus PT1911. It drops right in.... trigger will not pull with safety engaged. No problems... nice snappy activation... great price.
Replacement for pt1911(02/02/2011)
Bought this my my stainless pt1911. The color and fit are spot on. Works like a charm. My stock ambi safety was starting to come lose on the right side so I figured this would be a nice fix. great price as well.
not for remington r1(26/04/2011)
this seemed like a good buy for the price, sure looked good. i'm not exactly a gunsmith, but this definitely didn't drop into my 1911. haven't seen alot of reviews for use of anything in the remington r1 but of all the parts i purchased so far this was the only one i had any issue with. the pin broke off trying to aleviate the slight bend, maybe i got a bad cast or it's just the difference of the r1 but this didn't work for me.
Amazing value! Great part!(14/06/2012)
After deciding I did not like the feel of an Ed Brown extended safety I had fit to my 1911, I decided to give this piece a try. Hey, for [$] what could I lose? To my surprise not only did this part require even LESS fitting than the Ed Brown part, but it feels great and works beautifully. Obviously as with any aftermarket 1911 part some fitting will be required, but this was almost too easy. The finish on the part is a little dull, and some cast marks can be seen, but a little polishing went a long way. Definitely recommended!
Just move on, save your time and money(21/08/2012)
Most all of these ambi safeties need fitting, so that is no big deal. However once I was pretty much done fitting I began to function test and then refine the fit. Just when I had gotten it just about perfect, the little weak catch that connects the two ambi rods together snaps. Bare in mind you do not touch this connection at all. Total waste of time.
Very Good Ambi Safety(13/04/2016)
I have installed two of these safeties. One on a SW1911SC and one on a custom build. Both safeties functioned perfectly. I actually tighten the connector between the two pieces so that it is a snap fit. I have not had either safety break on me. I would recommend this safety based on the quality and the value.
Works well for fast release!(09/11/2009)
Works great, and looks great! I like that this safety sits lower, so it is easier to engage and disengage quickly! Good value.
Not a good replacement for ambi-safety(09/04/2011)
I purchased this intending to replace the ambi-safety on my Springfield "loaded with parkerized finish. I was looking for a single sided tactical safety that was low profile for concealment. This safe has a thumb lever that is wider and longer than the factory Springfield thereby defeating the purpose I was purchasing it for. This safety is advertised as one that is extended, tactical and good for concealment. The safety also has a shiny blue finish that doesn't look right. The safety lever flange is made of a thinner material than the factory unit so the contour bevel does not have the same appearance as the factory safety. I'm sure this safety is good for something just not a Springfield 1911-A1 Loaded with parkerized finish. I also noted that the detent contour is a different shape so I pretty sure that would require fitting in addition to the sear block which would be visible meaning need for re-bluing or not depending on your taste. I plan on returning this for either an EGW or Ed Brown unit.
Simple Ambi to Single Ended Conversion(25/06/2012)
I didn't want an ambidextrous safety so I installed this single ended safety on my Taurus PT1911. It's a good match in fit and finish and only required a little bit of stoning to install. This extension is a good compromise between ease of actuation and profile and it fits closely to the plunger tube.
N.º de producto: 791000026 STI Ambidextrous Extended Safety, SS Ref Fabricante: 56002010000 Almohadillas del pulgar contorneadas y serradas cuentan con un ligero ángulo descendente que permite que tu pulgar contacte con la almohadilla en un movimiento natural y amplio. Proporciona una posición cómoda del pulgar para tiradores que utilizan un agarre alto del pulgar. Los bordes redondeados resisten enganches, además de agregar un mínimo volumen en armas de porte.
93.62EUR193,62 €
*154,90 € Solo 1 unidades disponibles a este precio
Plazo de entrega de aproximadamente 2-4 días. 1 pcs. en el almacén local
Acabado:
Stainless Steel
Estilo:
Extended
Hacer:
1911
Mano:
Ambidiestro
Modelo:
Government,Commander,Officers
Peso de entrega: 0,091kgAltura de envío: 8mmAncho de envío: 79mmLongitud de envío: 122mm
Detalles del artículo
Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.x
Estos artículos están controlados por el gobierno de los EE. UU. Y autorizados para exportar solo al país de destino final para que los utilicen el destinatario final o el / los usuario (s) final (es) aquí identificado (s). No pueden ser revendidos, transferidos ni eliminados de otra manera, para cualquier otro país o a cualquier otra persona que no sea el destinatario final o el (los) usuario (s) final (es) autorizado (s), ya sea en su forma original o después de haber sido incorporados a otros artículos, sin obtener primero la aprobación del Gobierno de los EE. UU. de su ley y regulaciones.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Contoured, serrated thumb pads feature a slight downward angle that lets your thumb contact the pad in a natural, sweeping motion. Provides a comfortable thumb position for shooters using a high-thumb hold. Rounded edges resist snagging, plus give minimal bulk on carry guns.
SPECS: CM steel, Blue, or stainless steel (SS), Single and Ambidextrous (Ambi). Thumb pad: .976" (24.8mm) long, .223" (5.6mm) wide. Gunsmith fitting required.
Más...
Almohadillas Serradas para un Desenganche Positivo
Almohadillas del pulgar contorneadas y serradas cuentan con un ligero ángulo descendente que permite que tu pulgar contacte con la almohadilla en un movimiento natural y amplio. Proporciona una posición cómoda del pulgar para tiradores que utilizan un agarre alto del pulgar. Los bordes redondeados resisten enganches, además de agregar un mínimo volumen en armas de porte.
ESPECIFICACIONES: Acero CM, azul o acero inoxidable (SS), para mano única y ambidiestro (Ambi). Almohadilla del pulgar: .976" (24.8mm) de largo, .223" (5.6mm) de ancho. Requiere ajuste por un armero.
Más...
Evaluaciones de clientes para STI Ambidextrous Extended Safety, SS
Número de evaluaciones: 10
De brownells.com: 10
Evaluación media: 3,9
Pleasant surprise(21/07/2009)
Dropped right in to the Taurus 1911 I was working on. Required no fitting or adjustment.
Fits in a PT1911 Perfectly NO FITTING(09/10/2009)
I received this safety and had read the previous review on brownells about how it dropped right into a PT1911. This was interesting to me because I thought ALL safeties needed fitting. Well i received the part. The part is well made and almost looks exactly like the stock PT1911 safety, except it is single sided. Well, I just want to confirm... this safety DOES NOT require fitting for a Taurus PT1911. It drops right in.... trigger will not pull with safety engaged. No problems... nice snappy activation... great price.
Replacement for pt1911(02/02/2011)
Bought this my my stainless pt1911. The color and fit are spot on. Works like a charm. My stock ambi safety was starting to come lose on the right side so I figured this would be a nice fix. great price as well.
not for remington r1(26/04/2011)
this seemed like a good buy for the price, sure looked good. i'm not exactly a gunsmith, but this definitely didn't drop into my 1911. haven't seen alot of reviews for use of anything in the remington r1 but of all the parts i purchased so far this was the only one i had any issue with. the pin broke off trying to aleviate the slight bend, maybe i got a bad cast or it's just the difference of the r1 but this didn't work for me.
Amazing value! Great part!(14/06/2012)
After deciding I did not like the feel of an Ed Brown extended safety I had fit to my 1911, I decided to give this piece a try. Hey, for [$] what could I lose? To my surprise not only did this part require even LESS fitting than the Ed Brown part, but it feels great and works beautifully. Obviously as with any aftermarket 1911 part some fitting will be required, but this was almost too easy. The finish on the part is a little dull, and some cast marks can be seen, but a little polishing went a long way. Definitely recommended!
Just move on, save your time and money(21/08/2012)
Most all of these ambi safeties need fitting, so that is no big deal. However once I was pretty much done fitting I began to function test and then refine the fit. Just when I had gotten it just about perfect, the little weak catch that connects the two ambi rods together snaps. Bare in mind you do not touch this connection at all. Total waste of time.
Very Good Ambi Safety(13/04/2016)
I have installed two of these safeties. One on a SW1911SC and one on a custom build. Both safeties functioned perfectly. I actually tighten the connector between the two pieces so that it is a snap fit. I have not had either safety break on me. I would recommend this safety based on the quality and the value.
Works well for fast release!(09/11/2009)
Works great, and looks great! I like that this safety sits lower, so it is easier to engage and disengage quickly! Good value.
Not a good replacement for ambi-safety(09/04/2011)
I purchased this intending to replace the ambi-safety on my Springfield "loaded with parkerized finish. I was looking for a single sided tactical safety that was low profile for concealment. This safe has a thumb lever that is wider and longer than the factory Springfield thereby defeating the purpose I was purchasing it for. This safety is advertised as one that is extended, tactical and good for concealment. The safety also has a shiny blue finish that doesn't look right. The safety lever flange is made of a thinner material than the factory unit so the contour bevel does not have the same appearance as the factory safety. I'm sure this safety is good for something just not a Springfield 1911-A1 Loaded with parkerized finish. I also noted that the detent contour is a different shape so I pretty sure that would require fitting in addition to the sear block which would be visible meaning need for re-bluing or not depending on your taste. I plan on returning this for either an EGW or Ed Brown unit.
Simple Ambi to Single Ended Conversion(25/06/2012)
I didn't want an ambidextrous safety so I installed this single ended safety on my Taurus PT1911. It's a good match in fit and finish and only required a little bit of stoning to install. This extension is a good compromise between ease of actuation and profile and it fits closely to the plunger tube.
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.