Brownells Iberica - El mayor proveedor de accesorios para el Tiro, Piezas y herramientas del armero. España
076683350015 100060677
This 7.62x39mm Two-Die Full Length Die Set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated.
74.9 74.9 1 EUR
N.º de producto: 100060677
RCBS 7.62X39MM FULL LENGTH DIE SET
Ref Fabricante: 35001 076683350015 Este Juego de Dados de Longitud Completa 7.62x39mm de dos dados está diseñado para la recarga de cartuchos con cuello de botella e incluye un Dado de Tamaño Completo con Unidad Expansora-Desencapsuladora y un Dado de Asentamiento con Enchufe para Asentar la Bala. El Dado de Tamaño Completo ajusta la vaina a las dimensiones mínimas de cartucho según SAAMI. Dimensiona el exterior de la vaina, desencapsula y expande el cuello para aceptar la bala. El dado cuenta con respiraderos para prevenir daños en la vaina causados por aire atrapado y por exceso de lubricante. El espacio de cabeza se mantiene con tolerancias mínimas para evitar cambios en la longitud del cuerpo de la vaina durante el dimensionamiento completo. El Dado de Asentamiento incluido tiene un engarzador de rodillo incorporado para asegurar la bala al mismo tiempo que se asienta.
74.9 EUR 0 74,90 € *
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Caracteristicas: Cartucho: 7.62 x 39 mm Tipo de die: Full Length Die Set

Atributos

Cartucho: 7.62 x 39 mm Tipo de die: Full Length Die Set Peso de entrega: 0,454kg Altura de envío: 51mm Ancho de envío: 102mm Longitud de envío: 127mm

Detalles del artículo

Hecho en USA



This 7.62x39mm Two-Die Full Length Die Set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for excessive lubricant. Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing. The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated.
Newsletters