Su cesta está vacía.

Cesta

926-532900

Suscribirse al boletín

BROWNELLS
AR-15/M16 UPPER RECEIVER ACTION BLOCK

050806109520 080000661

Protect Receiver From Damage When Clamping

Heavy-duty blocks allow you to firmly clamp AR-15/M16 receiver halves in a vise without risk of crushing, twisting, or otherwise distorting them when applying vise pressure or torquing the barrel nut. Keeps your rifle secure for safe, effective cleaning, assembly, and repair. High pressure, solvent resistant, structural Rynite block and insert surround the entire upper receiver and support it inside and out to make rebarreling the AR-15/M16 an easy, one-man job. Lets you firmly secure a mil-spec carry handle receiver or mil-spec flattop receiver in a large bench vise for barrel removal/installation. Torque generated while tightening the barrel nut is transmitted to the block and insert, not the receiver. Minimizes the possibility of damage to the barrel detent pin and receiver detent notch. Holds securely without marring the finish. DO NOT USE ON BILLET UPPERS OR LEFT HAND UPPERS, OR DAMAGE TO THE UPPER CAN RESULT.

SPECS: Injection-molded Rynite, black. Fits A1, A2, and standard flattop receivers. Block - 2.5" (6.3cm) thick, 3.5" (8.8cm) wide, 4.5" (11.4cm) high. Insert - 8" (20cm) long, 1" (2.5cm) diameter. Torque tested to 200 ft. lbs.

Más...

Protege el Receptor de Daños al Sujetarlo

Bloques de alta resistencia que te permiten sujetar firmemente las mitades del receptor AR-15/M16 en un tornillo de banco sin riesgo de aplastar, torcer o distorsionar de otra manera cuando se aplica presión del tornillo de banco o se gira la tuerca del cañón. Mantiene tu rifle seguro para una limpieza, ensamblaje y reparación efectivos y seguros. Bloque e inserto estructural Rynite resistente a alta presión y solventes rodean completamente el receptor superior y lo soportan por dentro y por fuera para hacer que el cambio de cañón del AR-15/M16 sea un trabajo fácil para una sola persona. Te permite asegurar firmemente un receptor con asa de transporte mil-spec o un receptor flattop mil-spec en un tornillo de banco grande para la instalación o remoción del cañón. El torque generado al apretar la tuerca del cañón se transmite al bloque y al inserto, no al receptor. Minimiza la posibilidad de daños al pasador de retención del cañón y a la muesca de retención del receptor. Sujeta de forma segura sin dañar el acabado. NO UTILIZAR EN RECEPTORES BILLET O RECEPTORES PARA ZURDOS, YA QUE PUEDE RESULTAR EN DAÑOS AL RECEPTOR.

ESPECIFICACIONES: Rynite moldeado por inyección, color negro. Compatible con receptores A1, A2 y estándar flattop. Bloque - 2.5" (6.3cm) de grosor, 3.5" (8.8cm) de ancho, 4.5" (11.4cm) de alto. Inserto - 8" (20cm) de largo, 1" (2.5cm) de diámetro. Probado a un torque de 200 ft. lbs.

Más...

Evaluaciones de clientes para BROWNELLS AR-15/M16 UPPER RECEIVER ACTION BLOCK

Número de evaluaciones: 13
De brownells.com: 13
Evaluación media: 4,3

Just Perfect! (17/09/2009)

This tool will save you time and money. The fit is good and will save you from doing serious damage to the upper receiver. Makes taking off the barrel nut a simple quick job to replace the barrel, gas tube or do a really good job of cleaning the breach. If you work on or own any AR-15/M-16 you will need one of these! It also comes with an insert that goes inside the upper receiver to help prevent putting to much pressure or torquing of the upper.

I couldn't get along without it. (16/10/2009)

If you do any barrel or free floating handguard work on an AR-15, this tool is a must. It works great!

Great Tool For Amatures (27/12/2009)

I used this block to install an 11.5" BBL on a DPMS upper A3 upper receiver a few years back and it worked flawless. There is an insert not shown on brownells that protects the receiver from being twisted as you torque the barrel. It goes in where the bolt would normally. A must have tool for any AR15 owner that might want to remove or install a BBL.

If you have friends or relatives with an AR15, they will love you for having this tool available since NOT using a receiver block will damage your rifle.

Good but not Great (19/02/2010)

By all means everyone that does any type of work on their own rifles should have a receiver action block. They are without a doubt the most handy tool there is. This block, however, closes from the top down over the upper receiver. Using any type of non-standard uppper receiver is not possible because the block will not close around the protruding metal. I have recently purchased a Bushmaster Receiver Block that closes from the bottom of the upper receiver. This way if you have optics already mounted or have an upper with a high rail - it does not cause any problems. Since the bottom of the receivers will all be the same so that they can mate with the mil-spec lower receiver - you will not have any issue at all. I would not recommend this particular block to a friend though ... I would recommend the Bushmaster.

Works Great, you get your moneys worth (12/03/2010)

This block works great, no problems, only improvement I made to it was to drill a hole through it, so I could hang it on my peg board. I also marked left and right on the sides.
Great value.

An absolute necessity for building an AR (14/03/2010)

This simple action block works great to safely secure your upper receiver for installing your barrel nut or flash hider. The block is constructed of non-marring delrin that is gentle on the finish of your upper. The block accepts both the carry handle and flattop versions. It also includes an upper insert to protect the integrity of the upper while clamping. This tool is an absolute essential to have in your toolbox.

a definate must have.... (19/03/2010)

this tool is definatly a "must have" if you are into doing your own barrel changes etc.on your ar-15 rifles....its an excellent tool well worth the money....it fits most ar-15's except DPMS TYPES....CHECK WITH BROWNELLS REPS. BEFORE PURCHASE....

huge misalignment issues (11/04/2010)

Doesnt fit DPMS,STAG,L.A.R grizzly,Vltor,Smith and Wesson !!! with "NO" receiver installed the vice block cannot close without added force,when closed there is a huge misalignment of about 1/8 inch fron side to side. I understand many of these receivers are from the same original machine shop but I added the names to help those who dont know this fact. Vltor are not milspec but all the rest are supposed to be. I may have to custom machine it to work as did another reveiewer did, its plastic so i may have to.I just really supprised at the poor quality even without a receiver mounted.

Great way to hold AR uppers. (01/05/2010)

Holds AR15 upper receivers solid. Easy to use.

Good product, but needs updating. (25/05/2010)

I have used this item several times working on my own rifles and it worked great. Now however, since I have obtained the rail alignment tool, I
think the block needs to be modified to allow use of the alignment tool with the action clamped in the block.

Works great with mil spec uppers (08/09/2010)

This action block works fine with both flattop and carry handle uppers. Stiff enough to really hold your work yet won't scratch the finish.

Maybe being picky (27/01/2011)

Great looking block, fits a carry handle and a flatty I have perfect, however I would have liked to have seen the insert fit tighter inside the upper. Maybe I'm too picky but it seems like it would be better if it was more of a slip fit than a loose fit.

Seems really stout though and it's good the hinge has a little preload to it, should help hold the receiver in and not drop it on the floor while you are placing in your vise

Works just like it should have (05/04/2011)

I had a Spike's Tactical upper and it worked just like it was supposed to. The insert that goes inside the receiver was loose the whole time however. I'm not sure if it was doing anything. I ended up having to put 70 foot pounds of torque on the barrel nut to index the next hole and it worked flawlessly.

Leer 13 mas calificaciones en brownells.com

69.9 69.9 1 EUR

N.º de producto: 080000661
BROWNELLS AR-15/M16 UPPER RECEIVER ACTION BLOCK
Ref Fabricante: 702003015 050806109520 Bloques de alta resistencia que te permiten sujetar firmemente las mitades del receptor AR-15/M16 en un tornillo de banco sin riesgo de aplastar, torcer o distorsionar de otra manera cuando se aplica presión del tornillo de banco o se gira la tuerca del cañón. Mantiene tu rifle seguro para una limpieza, ensamblaje y reparación efectivos y seguros. Bloque e inserto estructural Rynite resistente a alta presión y solventes rodean completamente el receptor superior y lo soportan por dentro y por fuera para hacer que el cambio de cañón del AR-15/M16 sea un trabajo fácil para una sola persona. Te permite asegurar firmemente un receptor con asa de transporte mil-spec o un receptor flattop mil-spec en un tornillo de banco grande para la instalación o remoción del cañón. El torque generado al apretar la tuerca del cañón se transmite al bloque y al inserto, no al receptor. Minimiza la posibilidad de daños al pasador de retención del cañón y a la muesca de retención del receptor. Sujeta de forma segura sin dañar el acabado. NO UTILIZAR EN RECEPTORES BILLET O RECEPTORES PARA ZURDOS, YA QUE PUEDE RESULTAR EN DAÑOS AL RECEPTOR.

69.9 EUR 861 69,90 € *

Plazo de entrega de aproximadamente 14-21 días.
Más de 10 pcs. en almacén de EE.UU.

Caracteristicas: Hacer: AR-15

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Atributos

Hacer: AR-15 Peso de entrega: 0,674kg Altura de envío: 76mm Ancho de envío: 229mm Longitud de envío: 318mm

Detalles del artículo

Hecho en USA

Protect Receiver From Damage When Clamping

Más...

Protege el Receptor de Daños al Sujetarlo

Más...

Evaluaciones de clientes para BROWNELLS AR-15/M16 UPPER RECEIVER ACTION BLOCK

Número de evaluaciones: 13
De brownells.com: 13
Evaluación media: 4,3

Just Perfect! (17/09/2009)

I couldn't get along without it. (16/10/2009)

If you do any barrel or free floating handguard work on an AR-15, this tool is a must. It works great!

Great Tool For Amatures (27/12/2009)

Good but not Great (19/02/2010)

Works Great, you get your moneys worth (12/03/2010)

This block works great, no problems, only improvement I made to it was to drill a hole through it, so I could hang it on my peg board. I also marked left and right on the sides.
Great value.

An absolute necessity for building an AR (14/03/2010)

a definate must have.... (19/03/2010)

huge misalignment issues (11/04/2010)

Great way to hold AR uppers. (01/05/2010)

Holds AR15 upper receivers solid. Easy to use.

Good product, but needs updating. (25/05/2010)

Works great with mil spec uppers (08/09/2010)

This action block works fine with both flattop and carry handle uppers. Stiff enough to really hold your work yet won't scratch the finish.

Maybe being picky (27/01/2011)

Works just like it should have (05/04/2011)

Leer 13 mas calificaciones en brownells.com

Los clientes compraron
Alternativas

BROWNELLS AR-15 ARMORER'S WRENCH
AR-15 ARMORER'S WRENCH

BROWNELLS

En stock

64,90 € *

Llaves

3,6

New

J P ENTERPRISES AR-15 SPRING KIT
AR-15 REDUCED POWER SPRING KIT

J P ENTERPRISES

En stock

24,90 € *

Muelles para el disparador

4,7

BROWNELLS AR-15/M16 ACTION BLOCK & LOWER VISE BLOCK SET
AR-15/M16 LOWER RECEIVER VISE BLOCK

BROWNELLS

En stock

69,90 € * 29,90 € - 69,90 €*

Bench & Vise Blocks

3,6

New

MAGPUL RSA
RSA™ RAIL SLING ATTACHMENT

MAGPUL

En stock

42,90 € *

Anillas para montura

4,8

BRAVO COMPANY PICATINNY BCMGUNFIGHTER SHORT VERTICAL GRIP POLYMER BLACK
PICATINNY BCMGUNFIGHTER SHORT VERTICAL GRIP

BRAVO COMPANY

En stock

54,90 € *

Puños verticales

Identificarse

¿Ha olvidado su contraseña?
Registrarse

Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.

Redes Sociales

Navegacion

Categorias

Ordering

Servicio al cliente

¡Bienvenido!

Bienvenido a Brownells, la principal Armeria de accesorios de armas de fuego, piezas de armas y herramientas para armeros en España. En nuestra web podrá encontrar todo tipo de accesorios y repuestos para sus rifles, carabinas, escopetas o armas cortas. Si le gusta la caza o el tiro de precisión esta es su web.

La promesa de Brownells España

La promesa Brownells para nuestros clientes: TU SATISFACIÓN ESTÁ GARANTIZADA. Si por cualquier motivo no estás 100% satisfecho con cualquiera de los productos comprados a nosotros, se lo devolvemos o cambiamos.

Nuestra oferta

Si te gusta disparar, trabajar con armas como negocio o hobby, o simplemente poseer un arma, este es tu lugar. Durante más de 75 años, tiradores, armeros profesionales, aficionados, cuerpos de defensa y especialistas en armas han venido a Brownells.es por la alta calidad en sus piezas de armas y en los repuestos que ellos necesitan.

Encontrarás más de 90,000 incluyendo exclusivas piezas de armas, accesorios, herramientas para armeros, munición y otros productos para el manteniminto, reparación y mejora de tus pistolas.

Su equipo Brownells España

Armeria A. Izquierdo (B-13309356)

Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.

Vista clásica

Vista móvil