The Brownells Short Muzzle Brakes offer an effective braking solution, with minimal added length Features: Designed to provide maximum braking ability in the smallest size possible One inch overall length Two rows of 0.125” ports evenly distribute exiting gasses and pressure Wrench flats on each side for simple installation Available with a 1.00” OD for perfect fitting to AR-15 or precision rifle barrels 1.00” OD models feature 5/8-24 threads
SPECS: Length – 1”. Diameter – 1.0”. Threads – 5/8-24. Do not use bullets larger in diameter than .30/7.62 in SMB 7.62 (unless exit port is opened).
Más...
Los frenos de boca cortos de Brownells ofrecen una solución de frenado efectiva, con un mínimo aumento de longitud. Características: Diseñados para proporcionar la máxima capacidad de frenado en el tamaño más pequeño posible. Longitud total de una pulgada. Dos filas de puertos de 0.125” distribuyen de manera uniforme los gases y la presión al salir. Planos para llave en cada lado para una instalación sencilla. Disponibles con un diámetro exterior de 1.00” para un ajuste perfecto en cañones de AR-15 o rifles de precisión. Los modelos de 1.00” de diámetro exterior cuentan con roscas de 5/8-24
ESPECIFICACIONES: Longitud – 1”. Diámetro – 1.0”. Roscas – 5/8-24. No utilices proyectiles de diámetro mayor que .30/7.62 en el SMB 7.62 (a menos que se amplíe la salida).
Más...
Evaluaciones de clientes para BROWNELLS SHORT MUZZLE BRAKE 30 CALIBER 5/8-24 SS SILVER
Número de evaluaciones: 4
De brownells.com: 4
Evaluación media: 2,8
Small but mighty(30/08/2013)
I had my FNAR barrel threaded for a brake but didn't want to add too much more length. This fit the bill perfectly.
It adds some noise as you would expect but does an amazing job at taming recoil considering its size.
Small, simple & effective!(09/03/2014)
Great value for the price! I milled mine down to .826 for use with my 7.62 barrel looks perfect!
Cannot be fitted to muzzle(16/02/2015)
The area between the threaded portion of the brake and rear baffle is not relieved to allow threads to pass so it cannot be fitted to the muzzle. No need for the wrench flats; limits some fitting options. Made of a type of steel that doesn't blue or parkerize readily. Please fix.
Installed this for a customer on a PTR-91 .308 and it broke at the weak point between the rows of holes which is thin. Threads on barrel are true but after firing the end blew off from the muzzle blast. At least nobody was hurt! What a shame since the size of this brake is what attracted the customer to purchase this. Flimsy construction and questionable heat treatment. :o(
N.º de producto: 080102578 BROWNELLS SHORT MUZZLE BRAKE 30 CALIBER 5/8-24 SS SILVER Ref Fabricante: 1005782 Los frenos de boca cortos de Brownells ofrecen una solución de frenado efectiva, con un mínimo aumento de longitud. Características: Diseñados para proporcionar la máxima capacidad de frenado en el tamaño más pequeño posible. Longitud total de una pulgada. Dos filas de puertos de 0.125” distribuyen de manera uniforme los gases y la presión al salir. Planos para llave en cada lado para una instalación sencilla. Disponibles con un diámetro exterior de 1.00” para un ajuste perfecto en cañones de AR-15 o rifles de precisión. Los modelos de 1.00” de diámetro exterior cuentan con roscas de 5/8-24
The Brownells Short Muzzle Brakes offer an effective braking solution, with minimal added length Features: Designed to provide maximum braking ability in the smallest size possible One inch overall length Two rows of 0.125” ports evenly distribute exiting gasses and pressure Wrench flats on each side for simple installation Available with a 1.00” OD for perfect fitting to AR-15 or precision rifle barrels 1.00” OD models feature 5/8-24 threads
SPECS: Length – 1”. Diameter – 1.0”. Threads – 5/8-24. Do not use bullets larger in diameter than .30/7.62 in SMB 7.62 (unless exit port is opened).
Más...
Los frenos de boca cortos de Brownells ofrecen una solución de frenado efectiva, con un mínimo aumento de longitud. Características: Diseñados para proporcionar la máxima capacidad de frenado en el tamaño más pequeño posible. Longitud total de una pulgada. Dos filas de puertos de 0.125” distribuyen de manera uniforme los gases y la presión al salir. Planos para llave en cada lado para una instalación sencilla. Disponibles con un diámetro exterior de 1.00” para un ajuste perfecto en cañones de AR-15 o rifles de precisión. Los modelos de 1.00” de diámetro exterior cuentan con roscas de 5/8-24
ESPECIFICACIONES: Longitud – 1”. Diámetro – 1.0”. Roscas – 5/8-24. No utilices proyectiles de diámetro mayor que .30/7.62 en el SMB 7.62 (a menos que se amplíe la salida).
Más...
Evaluaciones de clientes para BROWNELLS SHORT MUZZLE BRAKE 30 CALIBER 5/8-24 SS SILVER
Número de evaluaciones: 4
De brownells.com: 4
Evaluación media: 2,8
Small but mighty(30/08/2013)
I had my FNAR barrel threaded for a brake but didn't want to add too much more length. This fit the bill perfectly.
It adds some noise as you would expect but does an amazing job at taming recoil considering its size.
Small, simple & effective!(09/03/2014)
Great value for the price! I milled mine down to .826 for use with my 7.62 barrel looks perfect!
Cannot be fitted to muzzle(16/02/2015)
The area between the threaded portion of the brake and rear baffle is not relieved to allow threads to pass so it cannot be fitted to the muzzle. No need for the wrench flats; limits some fitting options. Made of a type of steel that doesn't blue or parkerize readily. Please fix.
Installed this for a customer on a PTR-91 .308 and it broke at the weak point between the rows of holes which is thin. Threads on barrel are true but after firing the end blew off from the muzzle blast. At least nobody was hurt! What a shame since the size of this brake is what attracted the customer to purchase this. Flimsy construction and questionable heat treatment. :o(
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.