Brownells Iberica - El mayor proveedor de accesorios para el Tiro, Piezas y herramientas del armero. España

BROWNELLS
B&R RECOIL PAD FITTING JIG

050806110250 080000868
Lets You Do Fast, Professional, No-Mar Pad Installation
One of the most difficult aspects of fitting a recoil pad has always been the final fitting of pad to wood because it is so easy to hit the stock with the disc, sanding strip, or file - and ruin the finish. The B&R Recoil Pad Fitting Jig removes the risk of stock damage by letting you finish the pad completely off - and away from - the stock. The Jig is composed of two basic pieces: (1) an adjustable triangle on which the pad is mounted to be dressed to size, and (2) a universal support that attaches to the sanding disc table. Operation is simple. First, cut the stock to the length and pitch required to fit the customer. Attach the pad to the stock, and sharply scribe the outline of the stock on the pad. Then transfer the pad to the base plate of the Jig, set the angle of pitch, put the Jig on its support, and dress the pad to the point of just removing the scribed line (this is necessary as the line was drawn outside the stock). Finally, test fit the pad to the stock and do any final dressing by hand, if needed. The lines of the stock are carried correctly into the pad - and you have a perfect fit! The Jig eliminates all damage to the stock finish and reduces the entire pad mounting operation to a simple 15 minute exercise - making the job an easy and highly profitable one.

SPECS: Steel support is 20-1⁄4" (51.4cm) long. Steel triangle legs are approximately 11-1⁄4" (29.2cm) long. Aluminum base plate is 3-1⁄2" (9cm) long. Includes instructions.

144.9 144.9 1 EUR
N.º de producto: 080000868
BROWNELLS B&R RECOIL PAD FITTING JIG 050806110250 Uno de los aspectos más difíciles al ajustar una cantonera es el ajuste final de la cantonera a la madera, ya que es muy fácil golpear la culata con el disco, la tira de lija o la lima, y arruinar el acabado. El B&R Recoil Pad Fitting Jig elimina el riesgo de dañar la culata permitiéndote terminar la cantonera completamente fuera y lejos de la culata. El soporte se compone de dos piezas básicas: (1) un triángulo ajustable en el que se monta la cantonera para ajustarla al tamaño deseado, y (2) un soporte universal que se acopla a la mesa del disco de lijado. El funcionamiento es sencillo. Primero, corta la culata a la longitud y ángulo de inclinación requeridos para ajustar al cliente. Acopla la cantonera a la culata y marca claramente el contorno de la culata en la cantonera. Luego transfiere la cantonera a la placa base del soporte, ajusta el ángulo de inclinación, coloca el soporte en su base, y ajusta la cantonera hasta eliminar la línea marcada (esto es necesario ya que la línea se dibujó fuera de la culata). Finalmente, prueba a encajar la cantonera en la culata y realiza cualquier ajuste final a mano, si es necesario. Las líneas de la culata se transfieren correctamente a la cantonera, ¡y obtienes un ajuste perfecto! El soporte elimina todos los daños al acabado de la culata y reduce toda la operación de montaje de la cantonera a un simple ejercicio de 15 minutos, convirtiendo el trabajo en una tarea fácil y muy rentable.
144.9 EUR 4 144,90 € *
Plazo de entrega de aproximadamente 14-21 días.
4 pcs. en el almacén de EE.UU.
Caracteristicas: Hacer: Universal Rifles, Universal Shotguns

Atributos

Hacer: Universal Rifles,Universal Shotguns Peso de entrega: 0,454kg Altura de envío: 36mm Ancho de envío: 102mm Longitud de envío: 533mm

Detalles del artículo

Hecho en USA




Lets You Do Fast, Professional, No-Mar Pad Installation
One of the most difficult aspects of fitting a recoil pad has always been the final fitting of pad to wood because it is so easy to hit the stock with the disc, sanding strip, or file - and ruin the finish. The B&R Recoil Pad Fitting Jig removes the risk of stock damage by letting you finish the pad completely off - and away from - the stock. The Jig is composed of two basic pieces: (1) an adjustable triangle on which the pad is mounted to be dressed to size, and (2) a universal support that attaches to the sanding disc table. Operation is simple. First, cut the stock to the length and pitch required to fit the customer. Attach the pad to the stock, and sharply scribe the outline of the stock on the pad. Then transfer the pad to the base plate of the Jig, set the angle of pitch, put the Jig on its support, and dress the pad to the point of just removing the scribed line (this is necessary as the line was drawn outside the stock). Finally, test fit the pad to the stock and do any final dressing by hand, if needed. The lines of the stock are carried correctly into the pad - and you have a perfect fit! The Jig eliminates all damage to the stock finish and reduces the entire pad mounting operation to a simple 15 minute exercise - making the job an easy and highly profitable one.

SPECS: Steel support is 20-1⁄4" (51.4cm) long. Steel triangle legs are approximately 11-1⁄4" (29.2cm) long. Aluminum base plate is 3-1⁄2" (9cm) long. Includes instructions.

Newsletters