Brownells Iberica - El mayor proveedor de accesorios para el Tiro, Piezas y herramientas del armero. España

W. FREAR INNOVATIONS
COLLIMATOR ELEVATOR

100002512
Adapts Your Collimator For Use With Large Objective Optics
Precision-manufactured device greatly extends the use and range of your optical collimator for rifles equipped with large objective scopes or scopes mounted in rings high above the centerline of the bore. Very easy to use: Mount your collimator onto the elevation arm, insert your bore spud in the elevator block, then lock with thumbscrew. Insert your spud into the bore and move elevation shaft up or down. Adjust the collimator so its grid view is near the center of the objective lens, and lock collimator height with second thumbscrew.

NOTE: Can be used with any bore spud or arbor 1/2" or smaller to include expandable arbors.

SPECS: Elevator Block - Aluminum. 1¾" (4.5cm) long, ¾"(1.9cm) wide, 1¾" high. Elevation Shaft - Stainless steel. ¼" (6.3mm) diameter. Elevation Arm - Aluminum. 3⁄8" (9.5mm) diameter. Includes instructions. Can be used with any bore spud or arbor 1/2" OD or smaller to include expandable arbors.

124.9 124.9 1 EUR
Sale
N.º de producto: 100002512
W. FREAR INNOVATIONS COLLIMATOR ELEVATOR
Ref Fabricante: COLLELEV Dispositivo de precisión fabricado que amplía enormemente el uso y el alcance de tu colimador óptico para rifles equipados con visores de gran objetivo o visores montados en anillos muy por encima de la línea central del cañón. Muy fácil de usar: Monta tu colimador en el brazo de elevación, inserta tu spud de cañón en el bloque elevador y luego asegúralo con el tornillo de mariposa. Inserta tu spud en el cañón y mueve el eje de elevación hacia arriba o hacia abajo. Ajusta el colimador para que su vista de rejilla esté cerca del centro de la lente objetivo y asegura la altura del colimador con el segundo tornillo de mariposa.
124.9 EUR 0 124,90 € * 167,17 €
Notificar sobre disponibilidad
No disponible.

Atributos

Peso de entrega: 0,113kg Altura de envío: 5mm Ancho de envío: 58mm Longitud de envío: 152mm

Detalles del artículo

Hecho en USA




Adapts Your Collimator For Use With Large Objective Optics
Precision-manufactured device greatly extends the use and range of your optical collimator for rifles equipped with large objective scopes or scopes mounted in rings high above the centerline of the bore. Very easy to use: Mount your collimator onto the elevation arm, insert your bore spud in the elevator block, then lock with thumbscrew. Insert your spud into the bore and move elevation shaft up or down. Adjust the collimator so its grid view is near the center of the objective lens, and lock collimator height with second thumbscrew.

NOTE: Can be used with any bore spud or arbor 1/2" or smaller to include expandable arbors.

SPECS: Elevator Block - Aluminum. 1¾" (4.5cm) long, ¾"(1.9cm) wide, 1¾" high. Elevation Shaft - Stainless steel. ¼" (6.3mm) diameter. Elevation Arm - Aluminum. 3⁄8" (9.5mm) diameter. Includes instructions. Can be used with any bore spud or arbor 1/2" OD or smaller to include expandable arbors.

Newsletters