Oversized, steel takedown screw allows easy lever removal for a thorough cleaning, plus makes quick work when swapping standard levers for large loop levers for cowboy action shooting. Large diameter, knurled head provides a non-slip grasp during installation and removal. Replaces the original, factory lever screw without alteration.
SPECS: Steel, blued, matte finish. Fits Marlin 336, 1894, 1895, 30AS, and 30AW lever action rifles with 12-28 NF male thread.
Más...
Para una Rápida Extracción e Instalación de la Palanca
El tornillo de desmontaje de tamaño grande y acero facilita la extracción de la palanca para una limpieza a fondo, además de agilizar el proceso al cambiar palancas estándar por palancas de bucle grande para el tiro al plato estilo vaquero. Su cabeza de gran diámetro y moleteada proporciona un agarre antideslizante durante la instalación y extracción. Reemplaza el tornillo de la palanca original de fábrica sin necesidad de alteraciones.
ESPECIFICACIONES: Acero, azulado, acabado mate. Compatible con rifles de acción de palanca Marlin 336, 1894, 1895, 30AS y 30AW con rosca macho 12-28 NF.
Más...
Evaluaciones de clientes para BROWNELLS QUICK TAKEDOWN SCREW FOR MARLIN 336
Número de evaluaciones: 6
De brownells.com: 6
Evaluación media: 2,2
Marlin 336 Takedown screw - great(08/10/2010)
Great workmanship, clean knurling, good fit. Speeds up take down for thorough cleaning from breech. Great for Cowboy Action shooters.
Handy Marlin accessory(13/09/2012)
Fitted to a 336 444Marlin to replace the standard lever pivot screw. Much more convenient to remove lever and bolt for cleaning from breech end or rifle maintenance. Low profile dosen't snag or come loose. I have another on a Marlin 336 30-30 and it works just as well. An excellent and cheap up-grade.
Buyers Beware(22/07/2014)
Even though the SPECs claim that it will fit a Marlin 1894, it wasn't even close. It cost me almost as much in shipping it both ways as to just keeping the worthless screw.
Got screwed!(28/01/2015)
Very poor quality manufacture. Starting thread is not correct. Flat headed end for threading. OEM's utilize a slightly pointed starting end for ease of starting into female thread. These threads are oversized and stretched the original hole size as the original screw now has a loose fit. It originally was slightly snug. Starting threads are too thick due to the flat end on this screw. I would expect this quality from China, but not Brownell. Will not waste time in making purchases here again. Firearms deserve quality parts and this is far from that.
Wrong size thread(17/05/2015)
This screw may not fit your 336. It didn't fit mine when it arrived at my place two days ago. It is the wrong size thread, and is an issue that these screws from Brownells have had for more than a few years now. If you force the screw you can damage the threads in your rifle. Search the product name online and you'll see it's a recognised problem, and better screws can be had elsewhere.
Wrong size thread for Marlin 336(15/11/2015)
Wrong size thread
This screw may not fit your 336. It didn't fit mine when it arrived at my place two days ago. It is the wrong size thread, and is an issue that these screws from Brownells have had for more than a few years now. If you force the screw you can damage the threads in your rifle. Search the product name online and you'll see it's a recognised problem, and better screws can be had elsewhere.
N.º de producto: 080000559 BROWNELLS QUICK TAKEDOWN SCREW FOR MARLIN 336 El tornillo de desmontaje de tamaño grande y acero facilita la extracción de la palanca para una limpieza a fondo, además de agilizar el proceso al cambiar palancas estándar por palancas de bucle grande para el tiro al plato estilo vaquero. Su cabeza de gran diámetro y moleteada proporciona un agarre antideslizante durante la instalación y extracción. Reemplaza el tornillo de la palanca original de fábrica sin necesidad de alteraciones.
16.9EUR3316,90 €
*
Plazo de entrega de aproximadamente 14-21 días. Más de 10 pcs. en almacén de EE.UU.
Oversized, steel takedown screw allows easy lever removal for a thorough cleaning, plus makes quick work when swapping standard levers for large loop levers for cowboy action shooting. Large diameter, knurled head provides a non-slip grasp during installation and removal. Replaces the original, factory lever screw without alteration.
SPECS: Steel, blued, matte finish. Fits Marlin 336, 1894, 1895, 30AS, and 30AW lever action rifles with 12-28 NF male thread.
Más...
Para una Rápida Extracción e Instalación de la Palanca
El tornillo de desmontaje de tamaño grande y acero facilita la extracción de la palanca para una limpieza a fondo, además de agilizar el proceso al cambiar palancas estándar por palancas de bucle grande para el tiro al plato estilo vaquero. Su cabeza de gran diámetro y moleteada proporciona un agarre antideslizante durante la instalación y extracción. Reemplaza el tornillo de la palanca original de fábrica sin necesidad de alteraciones.
ESPECIFICACIONES: Acero, azulado, acabado mate. Compatible con rifles de acción de palanca Marlin 336, 1894, 1895, 30AS y 30AW con rosca macho 12-28 NF.
Más...
Evaluaciones de clientes para BROWNELLS QUICK TAKEDOWN SCREW FOR MARLIN 336
Número de evaluaciones: 6
De brownells.com: 6
Evaluación media: 2,2
Marlin 336 Takedown screw - great(08/10/2010)
Great workmanship, clean knurling, good fit. Speeds up take down for thorough cleaning from breech. Great for Cowboy Action shooters.
Handy Marlin accessory(13/09/2012)
Fitted to a 336 444Marlin to replace the standard lever pivot screw. Much more convenient to remove lever and bolt for cleaning from breech end or rifle maintenance. Low profile dosen't snag or come loose. I have another on a Marlin 336 30-30 and it works just as well. An excellent and cheap up-grade.
Buyers Beware(22/07/2014)
Even though the SPECs claim that it will fit a Marlin 1894, it wasn't even close. It cost me almost as much in shipping it both ways as to just keeping the worthless screw.
Got screwed!(28/01/2015)
Very poor quality manufacture. Starting thread is not correct. Flat headed end for threading. OEM's utilize a slightly pointed starting end for ease of starting into female thread. These threads are oversized and stretched the original hole size as the original screw now has a loose fit. It originally was slightly snug. Starting threads are too thick due to the flat end on this screw. I would expect this quality from China, but not Brownell. Will not waste time in making purchases here again. Firearms deserve quality parts and this is far from that.
Wrong size thread(17/05/2015)
This screw may not fit your 336. It didn't fit mine when it arrived at my place two days ago. It is the wrong size thread, and is an issue that these screws from Brownells have had for more than a few years now. If you force the screw you can damage the threads in your rifle. Search the product name online and you'll see it's a recognised problem, and better screws can be had elsewhere.
Wrong size thread for Marlin 336(15/11/2015)
Wrong size thread
This screw may not fit your 336. It didn't fit mine when it arrived at my place two days ago. It is the wrong size thread, and is an issue that these screws from Brownells have had for more than a few years now. If you force the screw you can damage the threads in your rifle. Search the product name online and you'll see it's a recognised problem, and better screws can be had elsewhere.
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.