WARNING: Blast Shield CANNOT BE USED with SMC Spare Magazine Holder and full size weapon lights even with the additional Picatinny rail length on this SMC Blast Shield. To use a full size weapon light with the SMC Spare Magazine Holder on this Standard version of the SMC Blast Shield, the Olight Baldr Mini Tactical Light and similar fitment are the only options at this time. The Blast Shield for Strike Modular Chassis (SMC) - ALPHA (Standard) was designed to protect your thumb from muzzle blast and heat. The SMC Blast Shield redirects muzzle blast forward and upward away from the shooters face. For attaching more variety of accessories, this Blast Shield adds more Picatinny rail length. Machined from 6061-T6 aluminum gives this metal good thermal conductivity and dissipates heat quicker than steel. Not only for the Strike Modular Chassis, this Blast Shield can fit most pistol frames with a max width of 21.20mm(0.84"). Lightweight and high-strength, the Blast Shield for Strike Modular Chassis (SMC) - ALPHA (Standard) protects the shooter and adds more room for accessories to customize your specific setup. COMPATIBILITY: Strike Modular Chassis (SMC) - ALPHA (Standard) Some pistol frames (max width of 21.20mm(0.84")) with 1913 Picatinny rail NOT COMPATIBLE: With SMC Spare Magazine Holder and full size weapon lights even with the additional Picatinny rail length on this Standard Blast Shield Use of SMC Blast Shield will void any fitment with any holsters unless specifically made for this setup Package Contents: x1 Blast Shield for Strike Modular Chassis (SMC) - ALPHA (Standard) x1 Set screw (M5x30mm) x1 Nut (M5) x1 Torx tool [T27] Product Features: Shield thumb from muzzle blast and heat Redirects muzzle blast forward and upward Add additional Picatinny rail length to for attaching accessories Quickly dissipates heat due to aluminum’s good thermal conductivity For 1913 Picatinny rails Lightweight and high-strength Machined from 6061-T6 aluminum WARNING: Blast Shield CANNOT BE USED with SMC Spare Magazine Holder and full size weapon lights even with the additional Picatinny rail length on this SMC Blast Shield. To use a full size weapon light with the SMC Spare Magazine Holder on this Standard version of the SMC Blast Shield, the Olight Baldr Mini Tactical Light and similar fitment are the only options at this time. -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
Protege tu experiencia de tiro con el MODULAR CHASSIS (SMC) BLAST SHIELD ALPHA.
ADVERTENCIA: El Blast Shield NO PUEDE SER USADO con el SMC Spare Magazine Holder y luces de armas de tamaño completo, incluso con la longitud adicional del riel Picatinny en este SMC Blast Shield. Para usar una luz de arma de tamaño completo con el SMC Spare Magazine Holder en esta versión estándar del SMC Blast Shield, la Olight Baldr Mini Tactical Light y ajustes similares son las únicas opciones disponibles en este momento.
El Blast Shield para el Strike Modular Chassis (SMC) - ALPHA (Estándar) fue diseñado para proteger tu pulgar del retroceso y el calor del cañón. Este SMC Blast Shield redirige el retroceso del cañón hacia adelante y hacia arriba, alejándolo de la cara del tirador. Para permitir la fijación de una mayor variedad de accesorios, este Blast Shield añade más longitud de riel Picatinny.
Fabricado de aluminio 6061-T6, este metal tiene buena conductividad térmica y disipa el calor más rápido que el acero. No solo es compatible con el Strike Modular Chassis, sino que también se adapta a la mayoría de los marcos de pistola con un ancho máximo de 21.20mm (0.84"). Ligero y de alta resistencia, el Blast Shield para el Strike Modular Chassis (SMC) - ALPHA (Estándar) protege al tirador y añade más espacio para accesorios que personalizan tu configuración específica.
COMPATIBILIDAD:
- Strike Modular Chassis (SMC) - ALPHA (Estándar)
- Algunos marcos de pistola (ancho máximo de 21.20mm (0.84")) con riel Picatinny 1913
NO COMPATIBLE:
- Con SMC Spare Magazine Holder y luces de armas de tamaño completo, incluso con la longitud adicional del riel Picatinny en este Blast Shield estándar.
- El uso del SMC Blast Shield anulará cualquier compatibilidad con fundas a menos que estén específicamente diseñadas para esta configuración.
Contenido del Paquete:
- x1 Blast Shield para Strike Modular Chassis (SMC) - ALPHA (Estándar)
- x1 Tornillo de ajuste (M5x30mm)
- x1 Tuerca (M5)
- x1 Herramienta Torx [T27]
Características del Producto:
- Protege el pulgar del retroceso y el calor del cañón
- Redirige el retroceso del cañón hacia adelante y hacia arriba
- Añade longitud adicional de riel Picatinny para fijar accesorios
- Disipa rápidamente el calor gracias a la buena conductividad térmica del aluminio
- Para rieles Picatinny 1913
- Ligero y de alta resistencia
- Fabricado de aluminio 6061-T6
ADVERTENCIA: Este producto contiene químicos que el Estado de California conoce por causar cáncer y defectos de nacimiento u otros daños reproductivos. Para más información: www.P65Warnings.ca.gov