This handy little punch is made for just one purpose . . . to drive the front sight in or out without marring it or the barrel. We first tried Brass, but as you know, it leaves a "Brass tracking" wherever it rubs. We then tried fiber, but after a few hard blows it shatters. NYLON doesn't mark the barrel or sight, nor does it shatter or lose its shape after hard and prolonged use.
SPECS: 4" (10.2cm) long. 5/16" (7.9mm) diameter. Polyenco Nylon. Sold in a set of 3.
Más...
Punzón Sin Marcar para Mira y Pasadores
Este práctico pequeño punzón está hecho con un solo propósito... para instalar o remover la mira delantera sin dañarla ni al cañón. Primero probamos con latón, pero como sabes, deja un "rastro de latón" dondequiera que roza. Luego intentamos con fibra, pero después de unos cuantos golpes fuertes se rompe. El NYLON no marca el cañón ni la mira, tampoco se rompe ni pierde su forma después de un uso duro y prolongado.
ESPECIFICACIONES: 4" (10.2cm) de largo. Diámetro de 5/16" (7.9mm). Nylon Polyenco. Se vende en un conjunto de 3.
Más...
Evaluaciones de clientes para BROWNELLS NYLON DRIFT PUNCHES
Número de evaluaciones: 8
De brownells.com: 8
Evaluación media: 5
Nylon Sight Punches(03/09/2009)
Good product, doesn't damage bluing and the punches hold up well.
I would buy this product again(14/10/2009)
Very good quality,nice length..Doesn't damage the part or firearm...Hold up very well..
[...](12/11/2009)
A little worred at first, was not sure they would hold up on those hard to move sights, but they worked excellent, buy a set you'll like them.
Great item !!(29/10/2010)
Nice item to have in the tool kit . Works great without marring the sight.A couple of real stubborn sights required the use of a brass punch...the nylon wouldn't budge them but try the nylon punch first.
Nylon Punches(31/03/2012)
Did exactly what I needed it to do. No marks or scratches on my sights or slide. Pretty strong considering how thin they are. And.... you get THREE for a low price. Why are you still reading... add them to the cart already!!!
Great for drifting handgun sights(17/10/2012)
Product works as expected. I have used them multiple times for drifting out Glock rear sights and also installing them. Great price and good quality.
Great Product(16/08/2015)
I use these to adjust iron sights rather than a brass punch, because they won't mar the bluing, and are low cost, and long lasting.
Nylon Drift Punches.(22/04/2017)
Good tool for the Box . I thought I might need these.
N.º de producto: 080478000 BROWNELLS NYLON DRIFT PUNCHES Este práctico pequeño punzón está hecho con un solo propósito... para instalar o remover la mira delantera sin dañarla ni al cañón. Primero probamos con latón, pero como sabes, deja un "rastro de latón" dondequiera que roza. Luego intentamos con fibra, pero después de unos cuantos golpes fuertes se rompe. El NYLON no marca el cañón ni la mira, tampoco se rompe ni pierde su forma después de un uso duro y prolongado.
El punzón de nylon está diseñado para instalar o remover la mira delantera sin dañar la mira ni el cañón.
El material de nylon no deja marcas, no se rompe y mantiene su forma tras un uso prolongado.
Especificaciones: 4" de largo, 5/16" de diámetro, se vende en un conjunto de 3.
Atributos
Estilo:
Drift
Material:
Nylon
Talla:
5/16 in
Cantidad: 3 Peso de entrega: 0,023kgAncho de envío: 83mmLongitud de envío: 146mm
Detalles del artículo
Hecho en USA
🔧 El punzón NYLON FRONT-SIGHT DRIFT PUNCH de BROWNELLS es ideal para instalar o remover la mira delantera sin dañarla. Resistente y duradero. ¡Descúbrelo ahora!
This handy little punch is made for just one purpose . . . to drive the front sight in or out without marring it or the barrel. We first tried Brass, but as you know, it leaves a "Brass tracking" wherever it rubs. We then tried fiber, but after a few hard blows it shatters. NYLON doesn't mark the barrel or sight, nor does it shatter or lose its shape after hard and prolonged use.
SPECS: 4" (10.2cm) long. 5/16" (7.9mm) diameter. Polyenco Nylon. Sold in a set of 3.
Más...
Punzón Sin Marcar para Mira y Pasadores
Este práctico pequeño punzón está hecho con un solo propósito... para instalar o remover la mira delantera sin dañarla ni al cañón. Primero probamos con latón, pero como sabes, deja un "rastro de latón" dondequiera que roza. Luego intentamos con fibra, pero después de unos cuantos golpes fuertes se rompe. El NYLON no marca el cañón ni la mira, tampoco se rompe ni pierde su forma después de un uso duro y prolongado.
ESPECIFICACIONES: 4" (10.2cm) de largo. Diámetro de 5/16" (7.9mm). Nylon Polyenco. Se vende en un conjunto de 3.
Más...
Evaluaciones de clientes para BROWNELLS NYLON DRIFT PUNCHES
Número de evaluaciones: 8
De brownells.com: 8
Evaluación media: 5
Nylon Sight Punches(03/09/2009)
Good product, doesn't damage bluing and the punches hold up well.
I would buy this product again(14/10/2009)
Very good quality,nice length..Doesn't damage the part or firearm...Hold up very well..
[...](12/11/2009)
A little worred at first, was not sure they would hold up on those hard to move sights, but they worked excellent, buy a set you'll like them.
Great item !!(29/10/2010)
Nice item to have in the tool kit . Works great without marring the sight.A couple of real stubborn sights required the use of a brass punch...the nylon wouldn't budge them but try the nylon punch first.
Nylon Punches(31/03/2012)
Did exactly what I needed it to do. No marks or scratches on my sights or slide. Pretty strong considering how thin they are. And.... you get THREE for a low price. Why are you still reading... add them to the cart already!!!
Great for drifting handgun sights(17/10/2012)
Product works as expected. I have used them multiple times for drifting out Glock rear sights and also installing them. Great price and good quality.
Great Product(16/08/2015)
I use these to adjust iron sights rather than a brass punch, because they won't mar the bluing, and are low cost, and long lasting.
Nylon Drift Punches.(22/04/2017)
Good tool for the Box . I thought I might need these.