One kit so you can precisely tune the autos listed for smoothest double and/or single actions' pull and proper functioning.KIT #26520 COLT 1911 & COMMANDER - Contains 1 each 19 lb., 20 lb. and 21 lb. hammer springs. Factory spring is 23 lbs.
Más...
3 Opciones de Ajuste en 1
Un kit para que puedas ajustar con precisión las pistolas mencionadas para obtener la acción doble y/o simple más suave y un funcionamiento correcto. KIT #26520 COLT 1911 & COMMANDER - Contiene 1 muelle de martillo de 19 lb., 20 lb. y 21 lb. El muelle de fábrica es de 23 lb.
Más...
Evaluaciones de clientes para WOLFF KIT #26520
Número de evaluaciones: 5
De brownells.com: 5
Evaluación media: 3,4
3 Springs in 1 Kit(22/10/2009)
3 springs for fine-tuning the 1911,just as advertised
Springs are too long(05/06/2011)
I bought this three pack for my new Springfield TRP. The springs are difficult to install because of their length and once they are installed will not allow the hammer to be cocked because the springs stacks and will not compress any more. I'm not sure if this Springfield hammer spring housing is different, but I doubt it. All three springs are the same length so I don't think Brownell's made a mistake. Bottom line is they are worthless unless you cut them down and I could have done that with the original spring. BTW the original spring is shorter.
"reduced power spring" don't think so!(05/12/2011)
was to replace the old 'reduced power' mainspring by Wilson combat i have--but unfortunately not going to work. first review was right.
Wolff Kit #26520(27/05/2012)
This worked great when I swapped out the ILS mainspring housing to a STD housing. Note. If you have a Springfield this kit will not work. You must change out the factory ILS housing to a more standard colt style. The internal parts are different due to the locking system.
Great product & value(22/11/2012)
All you need to tune action. Right on spec's! Just install each one 'til you get the trigger pull you want. Wollf is on my list of 1911 products!
N.º de producto: 969265200 WOLFF KIT #26520 Ref Fabricante: 26520 Un kit para que puedas ajustar con precisión las pistolas mencionadas para obtener la acción doble y/o simple más suave y un funcionamiento correcto. KIT #26520 COLT 1911 & COMMANDER - Contiene 1 muelle de martillo de 19 lb., 20 lb. y 21 lb. El muelle de fábrica es de 23 lb.
15.9EUR015,90 €
*
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
One kit so you can precisely tune the autos listed for smoothest double and/or single actions' pull and proper functioning.KIT #26520 COLT 1911 & COMMANDER - Contains 1 each 19 lb., 20 lb. and 21 lb. hammer springs. Factory spring is 23 lbs.
Más...
3 Opciones de Ajuste en 1
Un kit para que puedas ajustar con precisión las pistolas mencionadas para obtener la acción doble y/o simple más suave y un funcionamiento correcto. KIT #26520 COLT 1911 & COMMANDER - Contiene 1 muelle de martillo de 19 lb., 20 lb. y 21 lb. El muelle de fábrica es de 23 lb.
Más...
Evaluaciones de clientes para WOLFF KIT #26520
Número de evaluaciones: 5
De brownells.com: 5
Evaluación media: 3,4
3 Springs in 1 Kit(22/10/2009)
3 springs for fine-tuning the 1911,just as advertised
Springs are too long(05/06/2011)
I bought this three pack for my new Springfield TRP. The springs are difficult to install because of their length and once they are installed will not allow the hammer to be cocked because the springs stacks and will not compress any more. I'm not sure if this Springfield hammer spring housing is different, but I doubt it. All three springs are the same length so I don't think Brownell's made a mistake. Bottom line is they are worthless unless you cut them down and I could have done that with the original spring. BTW the original spring is shorter.
"reduced power spring" don't think so!(05/12/2011)
was to replace the old 'reduced power' mainspring by Wilson combat i have--but unfortunately not going to work. first review was right.
Wolff Kit #26520(27/05/2012)
This worked great when I swapped out the ILS mainspring housing to a STD housing. Note. If you have a Springfield this kit will not work. You must change out the factory ILS housing to a more standard colt style. The internal parts are different due to the locking system.
Great product & value(22/11/2012)
All you need to tune action. Right on spec's! Just install each one 'til you get the trigger pull you want. Wollf is on my list of 1911 products!
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.