Classic walnut provides a close match to original factory stocks. Quality wood, has a straight grain pattern. 95% inletted for easy fitting to your action. Ready for final sanding, stain and finish.
SPECS: Walnut, straight grain, no figure. Accepts original hardware.Savage 94 forend comes relieved for .410 bore; can be opened up for 12 and 20 gauge.
Más...
Nogal Real; Contornos Originales
El nogal clásico proporciona una combinación cercana a las culatas originales de fábrica. Madera de calidad, con un patrón de veta recta. Pre-tallado al 95% para facilitar el ajuste a tu acción. Listo para el lijado final, tinte y acabado.
ESPECIFICACIONES: Nogal, veta recta, sin dibujo. Acepta herrajes originales. La delantera del Savage 94 viene preparada para calibre .410; se puede adaptar para los calibres 12 y 20.
Más...
Evaluaciones de clientes para WOOD PLUS BUTTSTOCK FITS SAVAGE 311
Número de evaluaciones: 3
De brownells.com: 3
Evaluación media: 2,3
Original Buttplate Too Large(09/07/2015)
The original Savage/Stevens butt plate is too long for this replacement stock and extends over the heel . Nothing was offered to remedy this from Brownell's, except to return. The "finished" model has a smaller aftermarket butt plate, already attached for a bit more $$.
The wood was acceptable except for the cut marks on one side of the butt. Couldn't feather out because there wasn't enough wood to do so with the original butt plate.
Hopefully this stock will be reintroduced with the proper dimensions in the future.
I purchased this stock to finish myself,the classic model 12 lines on the top of the stock is not shaped into the wood.The stock is close to 1/2 inch to short to accept the repo or factory butt plate.The LOP is close to one inch shorter than the factory field stock.The stock is 1/4 inch wider than factory,not a big deal I could shape it on the belt sander.I can take off the wood but not add the wood to the short LOP and butt plate base.[...]I'm in a hunt club and I do competitive card shoots about every weekend and I like to talk guns !
Great Stock at a Good Price(05/04/2012)
I purchased one of these buttstocks for my Savage Model 720. The stock is listed to fit a Remington Model 11, It should also be listed to fit the Savage Model 720, as it fit very well and only needed a final fit, and finishing.The wood is listed as straight grain with no figure, however the one I recieved has enough straight grain to be very eye pleasing. I wood definately buy this stock again.
N.º de producto: 984100311 WOOD PLUS BUTTSTOCK FITS SAVAGE 311 Ref Fabricante: NONE El nogal clásico proporciona una combinación cercana a las culatas originales de fábrica. Madera de calidad, con un patrón de veta recta. Pre-tallado al 95% para facilitar el ajuste a tu acción. Listo para el lijado final, tinte y acabado.
99.9EUR499,90 €
*
Plazo de entrega de aproximadamente 14-21 días. 4 pcs. en el almacén de EE.UU.
Calibre:
12 Gauge
Caracteristicas:
Replacement
Color:
Walnut Brown
Hacer:
Stevens,Savage Arms
Material:
Wood
Modelo:
311
Peso de entrega: 0,59kgAltura de envío: 56mmAncho de envío: 127mmLongitud de envío: 419mm
Detalles del artículo
Hecho en USA
N.º de producto: 984100494 WOOD PLUS BUTTSTOCK FITS SAVAGE 94 Ref Fabricante: NONE El nogal clásico proporciona una combinación cercana a las culatas originales de fábrica. Madera de calidad, con un patrón de veta recta. Pre-tallado al 95% para facilitar el ajuste a tu acción. Listo para el lijado final, tinte y acabado.
94.9EUR1094,90 €
*
Plazo de entrega de aproximadamente 14-21 días. Más de 10 pcs. en almacén de EE.UU.
Calibre:
.410 Bore,20 Gauge,12 Gauge
Caracteristicas:
Replacement
Color:
Walnut Brown
Hacer:
Savage Arms
Material:
Wood
Modelo:
94
Peso de entrega: 0,567kgAltura de envío: 61mmAncho de envío: 107mmLongitud de envío: 429mm
Classic walnut provides a close match to original factory stocks. Quality wood, has a straight grain pattern. 95% inletted for easy fitting to your action. Ready for final sanding, stain and finish.
SPECS: Walnut, straight grain, no figure. Accepts original hardware.Savage 94 forend comes relieved for .410 bore; can be opened up for 12 and 20 gauge.
Más...
Nogal Real; Contornos Originales
El nogal clásico proporciona una combinación cercana a las culatas originales de fábrica. Madera de calidad, con un patrón de veta recta. Pre-tallado al 95% para facilitar el ajuste a tu acción. Listo para el lijado final, tinte y acabado.
ESPECIFICACIONES: Nogal, veta recta, sin dibujo. Acepta herrajes originales. La delantera del Savage 94 viene preparada para calibre .410; se puede adaptar para los calibres 12 y 20.
Más...
Evaluaciones de clientes para WOOD PLUS BUTTSTOCK FITS SAVAGE 311
Número de evaluaciones: 3
De brownells.com: 3
Evaluación media: 2,3
Original Buttplate Too Large(09/07/2015)
The original Savage/Stevens butt plate is too long for this replacement stock and extends over the heel . Nothing was offered to remedy this from Brownell's, except to return. The "finished" model has a smaller aftermarket butt plate, already attached for a bit more $$.
The wood was acceptable except for the cut marks on one side of the butt. Couldn't feather out because there wasn't enough wood to do so with the original butt plate.
Hopefully this stock will be reintroduced with the proper dimensions in the future.
I purchased this stock to finish myself,the classic model 12 lines on the top of the stock is not shaped into the wood.The stock is close to 1/2 inch to short to accept the repo or factory butt plate.The LOP is close to one inch shorter than the factory field stock.The stock is 1/4 inch wider than factory,not a big deal I could shape it on the belt sander.I can take off the wood but not add the wood to the short LOP and butt plate base.[...]I'm in a hunt club and I do competitive card shoots about every weekend and I like to talk guns !
Great Stock at a Good Price(05/04/2012)
I purchased one of these buttstocks for my Savage Model 720. The stock is listed to fit a Remington Model 11, It should also be listed to fit the Savage Model 720, as it fit very well and only needed a final fit, and finishing.The wood is listed as straight grain with no figure, however the one I recieved has enough straight grain to be very eye pleasing. I wood definately buy this stock again.
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.