All components are CNC milled from a solid steel billet to ensure accurate, repeatable click adjustments for windage and elevation. The serrated rear leaf features a slight reverse angle to reduce glare and improve sight picture. Fully compatible with the factory front sight on Mk I and Mk II™ pistols. Fits Ruger® 22 pistols equipped with factory adjustable rear sight. No fitting required, uses factory dovetail; locks in place with two set screws.
Todos los componentes son fresados CNC a partir de un bloque sólido de acero para asegurar ajustes precisos y repetibles de clic para la deriva y la elevación. La hoja trasera serrada presenta un ligero ángulo inverso para reducir el deslumbramiento y mejorar la imagen del punto de mira. Totalmente compatible con el punto de mira delantero de fábrica en pistolas Mk I y Mk II™. Apto para pistolas Ruger® 22 equipadas con punto de mira trasero ajustable de fábrica. No requiere ajuste, utiliza la cola de milano de fábrica; se fija en su lugar con dos tornillos de presión.
ESPECIFICACIONES: Acero, azul, acabado mate. Hoja - .767" (19.5mm) de ancho, .319" (8mm) de alto. Muesca - .11" (2.7mm) de ancho, .07" (1.8mm) de profundidad. Cuerpo - .70" (18mm) de ancho, 1.4" (3.6cm) de largo.
Más...
Evaluaciones de clientes para VOLQUARTSEN TL 2000 SIGHT
Número de evaluaciones: 4
De brownells.com: 4
Evaluación media: 4,8
VOLQUARTSEN VC2TL / TL2000(17/09/2014)
Fitted this rear sight to my Ruger Comp Mk111. Perfect fit and drifted in tight so it won't move. The two supplied locking screws are great to keep it in place. Sight picture is much improved over stock due to the shallower and narrower notch.
Not so much guess work in aiming now. Better groups. Awesome. Non reflective ribbing on the sight blade is great feature. There is no freeplay in this unit - the stock sight wobbled all over the place. Windage adjustment screw is thankfully much larger than the tiny one on the original sight.
Only downside was the supplied hex key was too loose to safely use - no biggie. Read my review and buy this sight without any reservations. Cheers all, Brad.
Nice quality sight(01/10/2015)
Definitely a tighter fit then what the description leads one to believe. I was installing the sight on a Ruger MKIII Hunter 22/45 and needed a hammer from the get go!
--Pros: upside is that the set screws really are needed and are just here as backups, really high quality part.
--Cons: If you don't have the right hammer/ nylon punch, you could damage the sight or receiver. (you would need a lot of force for either). Also there are no instructions whatsoever, so if you're not mechanically inclined and can figure how things work by analyzing them, try a different sight or let a professional do the installation.
Beside a soft surface to protect the receive, this was the only tool I needed:
Much better than the stock site that Ruger provides. Adjustments are finer and site picture is much more defined. Solid unit and the only disadvantage is that it must be fitted to the dovetail.
For those that were complaining that there were no instructions here they are:
- Remove the elevation screw all the way out until you can move the leaf forward
- Take out the dual elevation Springs and don't lose them
- Remove the set screws and clean them with acetone along with the holes
- Fit the site base appropriately to the dovetail then drift it in as best as possible so that it is even on both sides with the receiver - Lock down site base with the two set screws using blue Loctite
- Replace the dual elevation springs and screw down the elevation screw
Fitting required(04/08/2018)
Heavy duty and well made. Strong positive clicks. No slop anywhere. Mine required lots of fitting to install. The set screws suggest that this is a drop in part but it is not.
I like a sight picture that leaves only a small clearance on each side of the front sight. This sight delivers that, and is almost too much of a good thing. Mounted on a Ruger MKII 10" target.
N.º de producto: 930000011 VOLQUARTSEN TL 2000 SIGHT Ref Fabricante: VC2TL810162011734 Todos los componentes son fresados CNC a partir de un bloque sólido de acero para asegurar ajustes precisos y repetibles de clic para la deriva y la elevación. La hoja trasera serrada presenta un ligero ángulo inverso para reducir el deslumbramiento y mejorar la imagen del punto de mira. Totalmente compatible con el punto de mira delantero de fábrica en pistolas Mk I y Mk II™. Apto para pistolas Ruger® 22 equipadas con punto de mira trasero ajustable de fábrica. No requiere ajuste, utiliza la cola de milano de fábrica; se fija en su lugar con dos tornillos de presión.
129.9EUR1129,90 €
*
Plazo de entrega de aproximadamente 14-21 días. 1 pcs. en el almacén de EE.UU.
Caracteristicas:Color del punto de mira: BlackEstilo: Ajustable, Target, Factory ReplacementHacer: RugerModelo: Mark I, Mark II
Color del punto de mira:
Black
Estilo:
Ajustable,Factory Replacement,Target
Hacer:
Ruger
Modelo:
Mark I,Mark II
Peso de entrega: 0,036kgAltura de envío: 10mmAncho de envío: 122mmLongitud de envío: 193mm
All components are CNC milled from a solid steel billet to ensure accurate, repeatable click adjustments for windage and elevation. The serrated rear leaf features a slight reverse angle to reduce glare and improve sight picture. Fully compatible with the factory front sight on Mk I and Mk II™ pistols. Fits Ruger® 22 pistols equipped with factory adjustable rear sight. No fitting required, uses factory dovetail; locks in place with two set screws.
Todos los componentes son fresados CNC a partir de un bloque sólido de acero para asegurar ajustes precisos y repetibles de clic para la deriva y la elevación. La hoja trasera serrada presenta un ligero ángulo inverso para reducir el deslumbramiento y mejorar la imagen del punto de mira. Totalmente compatible con el punto de mira delantero de fábrica en pistolas Mk I y Mk II™. Apto para pistolas Ruger® 22 equipadas con punto de mira trasero ajustable de fábrica. No requiere ajuste, utiliza la cola de milano de fábrica; se fija en su lugar con dos tornillos de presión.
ESPECIFICACIONES: Acero, azul, acabado mate. Hoja - .767" (19.5mm) de ancho, .319" (8mm) de alto. Muesca - .11" (2.7mm) de ancho, .07" (1.8mm) de profundidad. Cuerpo - .70" (18mm) de ancho, 1.4" (3.6cm) de largo.
Más...
Evaluaciones de clientes para VOLQUARTSEN TL 2000 SIGHT
Número de evaluaciones: 4
De brownells.com: 4
Evaluación media: 4,8
VOLQUARTSEN VC2TL / TL2000(17/09/2014)
Fitted this rear sight to my Ruger Comp Mk111. Perfect fit and drifted in tight so it won't move. The two supplied locking screws are great to keep it in place. Sight picture is much improved over stock due to the shallower and narrower notch.
Not so much guess work in aiming now. Better groups. Awesome. Non reflective ribbing on the sight blade is great feature. There is no freeplay in this unit - the stock sight wobbled all over the place. Windage adjustment screw is thankfully much larger than the tiny one on the original sight.
Only downside was the supplied hex key was too loose to safely use - no biggie. Read my review and buy this sight without any reservations. Cheers all, Brad.
Nice quality sight(01/10/2015)
Definitely a tighter fit then what the description leads one to believe. I was installing the sight on a Ruger MKIII Hunter 22/45 and needed a hammer from the get go!
--Pros: upside is that the set screws really are needed and are just here as backups, really high quality part.
--Cons: If you don't have the right hammer/ nylon punch, you could damage the sight or receiver. (you would need a lot of force for either). Also there are no instructions whatsoever, so if you're not mechanically inclined and can figure how things work by analyzing them, try a different sight or let a professional do the installation.
Beside a soft surface to protect the receive, this was the only tool I needed:
Much better than the stock site that Ruger provides. Adjustments are finer and site picture is much more defined. Solid unit and the only disadvantage is that it must be fitted to the dovetail.
For those that were complaining that there were no instructions here they are:
- Remove the elevation screw all the way out until you can move the leaf forward
- Take out the dual elevation Springs and don't lose them
- Remove the set screws and clean them with acetone along with the holes
- Fit the site base appropriately to the dovetail then drift it in as best as possible so that it is even on both sides with the receiver - Lock down site base with the two set screws using blue Loctite
- Replace the dual elevation springs and screw down the elevation screw
Fitting required(04/08/2018)
Heavy duty and well made. Strong positive clicks. No slop anywhere. Mine required lots of fitting to install. The set screws suggest that this is a drop in part but it is not.
I like a sight picture that leaves only a small clearance on each side of the front sight. This sight delivers that, and is almost too much of a good thing. Mounted on a Ruger MKII 10" target.
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.