Su cesta está vacía.

Cesta

926-532900

Suscribirse al boletín

SATURN PRODUCTS
SCG AR-15/M16 ACCU-GRIP BARREL VISE JAWS

852015000

Fully-Lined Barrel Grooves Prevent Slipping And Damage

Massive aluminum jaws lined with space age polyurethane elastomer grip tight and prevent marring on AR-15/M16 barrels. Two grooves fit standard and heavy barrel contours.

SPECS: Machined aluminum with permanently bonded green polyurethane elastomer lining. 5" (12.7cm) wide, 1" (2.5cm) thick, 3-7/8" (9.8cm) long. 2 lb. 6 oz. (1kg) wt. Fits 4" and wider vises.

Más...

Ranuras de Cañón Totalmente Revestidas Evitan el Deslizamiento y Daños

Mordazas masivas de aluminio revestidas con elastómero de poliuretano de última generación, agarran firmemente y previenen el desgaste en los cañones de AR-15/M16. Dos ranuras se ajustan a los contornos de cañón estándar y pesado.

ESPECIFICACIONES: Aluminio mecanizado con revestimiento permanente de elastómero de poliuretano verde. 5" (12.7cm) de ancho, 1" (2.5cm) de grosor, 3-7/8" (9.8cm) de largo. Peso 2 lb. 6 oz. (1kg). Apto para tornillos de banco de 4" y más anchos.

Más...

Evaluaciones de clientes para SATURN PRODUCTS ACCU-GRIP VISE JAWS

Número de evaluaciones: 9
De brownells.com: 9
Evaluación media: 4,2

If you're removing a barrel, buy it! (18/12/2009)

First off, I'm not quite sure why this is advertised for AR-15's only-- a barrel is a barrel, and this should work fine for about any gun. I've removed barrels using this product, as well as plain-jane wood blocks that are channeled out. The gripping surface on this tool is far superior to plain wood-- and grip is what it's all about when referencing blocks and vises. It's worth the extra cost.

Does not work with FN SCAR barrels (09/03/2010)

Description states that it works with 5.56 pencil barrels, but this is not accurate. Using the "pencil barrel" smaller diameter blocks, the aluminum blocks clamped shut in vise before rubber was touching the sides of the barrel. Barrel not only spun, but the was enough gap there to wobble the barrel.

Worked as advertised (18/05/2010)

Held the barrel, did not slip, did not mare the finish, very good tool. I bought this because I got a compensator for my M4, I removed the A2 flash hider with a strap wrench, but could not fully install the new compensator. Ordered this on a friday and got it on monday, pulled it out of the box, put the blocks in my vise, separated my upper and lower reciever, removed all the tactical toys off of the upper, set the barreled upper in the vise blocks, tightened the vise, put a wrench on my compensater and tightened it the rest of the way. Done! All in less time than it took me to type this and I was hobbleing around on crutches(softball injurie).

Good vise jaws (23/05/2010)

I use these to change M16 and M4 barrels, and they do a great job of not marring the barrel. The one change needed on this tool is a notch cut out for the bayonet lug, which prevents the barrel from spinning without having to tighten the vise with all of your might.

Barrel vice block (14/11/2011)

Works

So Easy A Caveman Can Use It (16/03/2012)

first off I am a Police armorer who works on various weapons platforms that my agency carries. I also have a gun business on the side that I do custom work. I purchased a set of the Accu-Grip vise jaws after having difficulty with the set that I had. WOW! what a difference these things were like a gift from heaven. They work well with H-Bars and Standard Barrel configs. I would highly recommend these to the professional or the novice building a black rifle. Well worth the money spent, you'll have less agravation in the long run.

Good barrel vise jaws (12/05/2012)

Quality contruction and they work.

Just works (24/01/2013)

I've had a set of these since the builder gave me a set in gunsmithing school. Haven't found much through the years that they won't hold.

works well. (28/03/2016)

It did not fit the barrels I was working on as received (too loose). I cut a strip of leather that would fit in one side and that tightened it right up, I then had no problem tightening up the compensator against the crush washer. This thing works well... but it wont fit every barrel profile right out of the box.

Leer 9 mas calificaciones en brownells.com

229.9 229.9 1 EUR

N.º de producto: 852015000
SATURN PRODUCTS ACCU-GRIP VISE JAWS
Ref Fabricante: NONE Mordazas masivas de aluminio revestidas con elastómero de poliuretano de última generación, agarran firmemente y previenen el desgaste en los cañones de AR-15/M16. Dos ranuras se ajustan a los contornos de cañón estándar y pesado.

229.9 EUR 49 229,90 € *

Plazo de entrega de aproximadamente 14-21 días.
Más de 10 pcs. en almacén de EE.UU.

Caracteristicas: Hacer: AR-15

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Atributos

Hacer: AR-15 Peso de entrega: 1,134kg Altura de envío: 81mm Ancho de envío: 112mm Longitud de envío: 119mm

Detalles del artículo

Hecho en USA

Fully-Lined Barrel Grooves Prevent Slipping And Damage

Massive aluminum jaws lined with space age polyurethane elastomer grip tight and prevent marring on AR-15/M16 barrels. Two grooves fit standard and heavy barrel contours.

SPECS: Machined aluminum with permanently bonded green polyurethane elastomer lining. 5" (12.7cm) wide, 1" (2.5cm) thick, 3-7/8" (9.8cm) long. 2 lb. 6 oz. (1kg) wt. Fits 4" and wider vises.

Más...

Ranuras de Cañón Totalmente Revestidas Evitan el Deslizamiento y Daños

Más...

Evaluaciones de clientes para SATURN PRODUCTS ACCU-GRIP VISE JAWS

Número de evaluaciones: 9
De brownells.com: 9
Evaluación media: 4,2

If you're removing a barrel, buy it! (18/12/2009)

Does not work with FN SCAR barrels (09/03/2010)

Worked as advertised (18/05/2010)

Good vise jaws (23/05/2010)

Barrel vice block (14/11/2011)

Works

So Easy A Caveman Can Use It (16/03/2012)

Good barrel vise jaws (12/05/2012)

Quality contruction and they work.

Just works (24/01/2013)

I've had a set of these since the builder gave me a set in gunsmithing school. Haven't found much through the years that they won't hold.

works well. (28/03/2016)

Leer 9 mas calificaciones en brownells.com

Identificarse

¿Ha olvidado su contraseña?
Registrarse

Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.

Redes Sociales

Navegacion

Categorias

Ordering

Servicio al cliente

¡Bienvenido!

Bienvenido a Brownells, la principal Armeria de accesorios de armas de fuego, piezas de armas y herramientas para armeros en España. En nuestra web podrá encontrar todo tipo de accesorios y repuestos para sus rifles, carabinas, escopetas o armas cortas. Si le gusta la caza o el tiro de precisión esta es su web.

La promesa de Brownells España

La promesa Brownells para nuestros clientes: TU SATISFACIÓN ESTÁ GARANTIZADA. Si por cualquier motivo no estás 100% satisfecho con cualquiera de los productos comprados a nosotros, se lo devolvemos o cambiamos.

Nuestra oferta

Si te gusta disparar, trabajar con armas como negocio o hobby, o simplemente poseer un arma, este es tu lugar. Durante más de 75 años, tiradores, armeros profesionales, aficionados, cuerpos de defensa y especialistas en armas han venido a Brownells.es por la alta calidad en sus piezas de armas y en los repuestos que ellos necesitan.

Encontrarás más de 90,000 incluyendo exclusivas piezas de armas, accesorios, herramientas para armeros, munición y otros productos para el manteniminto, reparación y mejora de tus pistolas.

Su equipo Brownells España

Armeria A. Izquierdo (B-13309356)