Brownells Iberica - El mayor proveedor de accesorios para el Tiro, Piezas y herramientas del armero. España

SINCLAIR INTERNATIONAL
THUMLER'S TUMBLER STAINLESS STEEL TUMBLING KIT

749012773
The Sinclair Stainless Steel Tumbling Kit features Thumler’s Tumblers Model “B” 15 lb. tumbler and 5 lbs. of Stainless Steel tumbling media. This kit can handle up to 2 pounds of brass and is designed for wet tumbling use. DO NOT DRY TUMBLE!!!! Put the 5 pounds of Stainless Steel media into the tumbler, fill with 1 gallon of cold water, and add up to 2 pounds of brass and a couple teaspoons of dish washing detergent. The tumbler usually needs about 3-4 hours to completely clean the brass. Remove brass from solution, rinse with cold water and dry. Once finished, your brass will be cleaned inside and out, even in the primer pocket. For additional shine on your brass, tumble them for a short time in a standard vibratory tumbler with corncob media and polish.
489.9 489.9 1 EUR
N.º de producto: 749012773
SINCLAIR INTERNATIONAL STAINLESS STEEL TUMBLING KIT, 110V El Kit de Pulido de Acero Inoxidable Sinclair incluye el pulidor modelo “B” de 15 lb de Thumler’s Tumblers y 5 lbs. de medios de pulido de acero inoxidable. Este kit puede manejar hasta 2 libras de latón y está diseñado para uso de pulido en húmedo. ¡¡¡NO REALIZAR PULIDO EN SECO!!!! Coloca las 5 libras de medios de acero inoxidable en el pulidor, llena con 1 galón de agua fría, añade hasta 2 libras de latón y un par de cucharaditas de detergente para platos. El pulidor generalmente necesita unas 3-4 horas para limpiar completamente el latón. Retira el latón de la solución, enjuaga con agua fría y seca. Una vez terminado, tu latón estará limpio por dentro y por fuera, incluso en el bolsillo del percutor. Para un brillo adicional en tu latón, púlelos por un corto tiempo en un pulidor vibratorio estándar con medios de mazorca de maíz y pulimento.
489.9 EUR 0 489,90 € *
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.

Atributos

Peso de entrega: 9,346kg

Detalles del artículo

Hecho en USA




The Sinclair Stainless Steel Tumbling Kit features Thumler’s Tumblers Model “B” 15 lb. tumbler and 5 lbs. of Stainless Steel tumbling media. This kit can handle up to 2 pounds of brass and is designed for wet tumbling use. DO NOT DRY TUMBLE!!!! Put the 5 pounds of Stainless Steel media into the tumbler, fill with 1 gallon of cold water, and add up to 2 pounds of brass and a couple teaspoons of dish washing detergent. The tumbler usually needs about 3-4 hours to completely clean the brass. Remove brass from solution, rinse with cold water and dry. Once finished, your brass will be cleaned inside and out, even in the primer pocket. For additional shine on your brass, tumble them for a short time in a standard vibratory tumbler with corncob media and polish.
Newsletters