Brownells Iberica - El mayor proveedor de accesorios para el Tiro, Piezas y herramientas del armero. España
990500200
Stamp Your Own Combination Of Numbers & Specs In Softer Steels & Metals
Hand cut and taper-ground to make "factory perfect" impressions when marking custom rifle barrels and other metal objects you want to professionally identify. Made from only the finest quality steel, selected for its proven ability to stand the gaff, then heat-treated to three distinct hardnesses. The character end is hardened to Rc 62 to prevent chipping. Hammer end is crowned and hardened to prevent mushrooming and the center is hardened to transmit the hammer blow.Sharply cut Gothic characters ensure a deep, clear impression. Smooth, ground taper improves appearance and eliminates cracks that sometimes develop in a rough taper. Each stamp is individually inspected and marked with index on thumb side so you'll always know which way the stamp is facing.Sets of letters consist of 27 characters, including period. Sets of figures consist of nine characters from 0 to 8, the 6 also being used for the 9. Packed in sturdy wooden box with lid.

NOTE: Steel Stamps are intended for softer steels, barrels, etc. DO NOT use on hardened or plated steels, knife blades, tough alloys. Misuse voids guarantee.

SPECS: Steel Stamps stocked in 1/16" (1.6mm) and 3/32" (2.4mm) sizes. The characters are cut into the end of a steel bar measuring ¼" (6.4mm) square x 2-3/8" (6.0cm) long. Purchase as sets or by the individual piece.

54.9 144.9 2 EUR
N.º de producto: 990500200
YOUNG BROTHERS STAMP WORKS INC 3/32" LETTER STAMP SET
Ref Fabricante: 02272 Cortados a mano y afilados en forma cónica para hacer impresiones "perfectas de fábrica" al marcar cañones de rifles personalizados y otros objetos metálicos que quieras identificar profesionalmente. Hechos solo del acero de la mejor calidad, seleccionado por su comprobada capacidad de resistir el uso rudo, luego tratados térmicamente hasta tres durezas distintas. El extremo del carácter está endurecido a Rc 62 para evitar astilladuras. El extremo del martillo está coronado y endurecido para prevenir la formación de hongos y el centro está endurecido para transmitir el golpe del martillo. Los caracteres góticos nítidamente cortados aseguran una impresión profunda y clara. El afilado suave y cónico mejora la apariencia y elimina las grietas que a veces se desarrollan en un cono rugoso. Cada sello se inspecciona individualmente y se marca con un índice en el lado del pulgar para que siempre sepas hacia qué lado está orientado el sello. Los sets de letras constan de 27 caracteres, incluyendo el punto. Los sets de números constan de nueve caracteres del 0 al 8, siendo el 6 también utilizado para el 9. Empacados en una resistente caja de madera con tapa.
144.9 EUR 7 144,90 € *
Plazo de entrega de aproximadamente 14-21 días.
7 pcs. en el almacén de EE.UU.
Caracteristicas: Talla: 3/32

Atributos

Talla: 3/32 Peso de entrega: 0,703kg Altura de envío: 74mm Ancho de envío: 53mm Longitud de envío: 152mm

Detalles del artículo

Hecho en USA



N.º de producto: 990600200
YOUNG BROTHERS STAMP WORKS INC 3/32" FIGURE STAMP SET
Ref Fabricante: 02092 332FIGURESET Cortados a mano y afilados en forma cónica para hacer impresiones "perfectas de fábrica" al marcar cañones de rifles personalizados y otros objetos metálicos que quieras identificar profesionalmente. Hechos solo del acero de la mejor calidad, seleccionado por su comprobada capacidad de resistir el uso rudo, luego tratados térmicamente hasta tres durezas distintas. El extremo del carácter está endurecido a Rc 62 para evitar astilladuras. El extremo del martillo está coronado y endurecido para prevenir la formación de hongos y el centro está endurecido para transmitir el golpe del martillo. Los caracteres góticos nítidamente cortados aseguran una impresión profunda y clara. El afilado suave y cónico mejora la apariencia y elimina las grietas que a veces se desarrollan en un cono rugoso. Cada sello se inspecciona individualmente y se marca con un índice en el lado del pulgar para que siempre sepas hacia qué lado está orientado el sello. Los sets de letras constan de 27 caracteres, incluyendo el punto. Los sets de números constan de nueve caracteres del 0 al 8, siendo el 6 también utilizado para el 9. Empacados en una resistente caja de madera con tapa.
54.9 EUR 8 54,90 € *
Plazo de entrega de aproximadamente 14-21 días.
8 pcs. en el almacén de EE.UU.
Caracteristicas: Talla: 3/32
Stamp Your Own Combination Of Numbers & Specs In Softer Steels & Metals
Hand cut and taper-ground to make "factory perfect" impressions when marking custom rifle barrels and other metal objects you want to professionally identify. Made from only the finest quality steel, selected for its proven ability to stand the gaff, then heat-treated to three distinct hardnesses. The character end is hardened to Rc 62 to prevent chipping. Hammer end is crowned and hardened to prevent mushrooming and the center is hardened to transmit the hammer blow.Sharply cut Gothic characters ensure a deep, clear impression. Smooth, ground taper improves appearance and eliminates cracks that sometimes develop in a rough taper. Each stamp is individually inspected and marked with index on thumb side so you'll always know which way the stamp is facing.Sets of letters consist of 27 characters, including period. Sets of figures consist of nine characters from 0 to 8, the 6 also being used for the 9. Packed in sturdy wooden box with lid.

NOTE: Steel Stamps are intended for softer steels, barrels, etc. DO NOT use on hardened or plated steels, knife blades, tough alloys. Misuse voids guarantee.

SPECS: Steel Stamps stocked in 1/16" (1.6mm) and 3/32" (2.4mm) sizes. The characters are cut into the end of a steel bar measuring ¼" (6.4mm) square x 2-3/8" (6.0cm) long. Purchase as sets or by the individual piece.

Newsletters