Unique Feed Lip Geometry Maintains A Consistent Angle For Reliable Feeding
These high-quality magazines have a unique, straight feed lip contour that helps maintain a consistent feed angle for reliable chambering of 9mm ammo. Body tube is through-hardened for superior strength and durability, then polished inside and out to eliminate drag. Follower has an extended front skirt, an anti-friction dry-film finish, and proper dimple placement for precise feed and function with every round. Floorplate is pre-drilled to accept aftermarket screw-on base pads (not included) with .524" center-to-center hole spacing. High-performance spring offers outstanding reliability and long life.
SPECS: Stainless steel, natural silver finish.
Más...
Geometría Única de Labio de Alimentación Mantiene un Ángulo Constante para una Alimentación Fiable
Estos cargadores de alta calidad tienen un contorno único de labio de alimentación recto que ayuda a mantener un ángulo de alimentación constante para un recamar confiable de munición de 9mm. El tubo del cuerpo está endurecido al máximo para una mayor resistencia y durabilidad, luego pulido por dentro y por fuera para eliminar la fricción. El seguidor tiene una falda frontal extendida, un acabado anti-fricción de película seca, y una colocación precisa de los puntos de apoyo para una alimentación y función exactas con cada disparo. La base del cargador está pre-perforada para aceptar almohadillas de base atornillables de posventa (no incluidas) con una separación entre agujeros de .524". El resorte de alto rendimiento ofrece una fiabilidad excepcional y una larga vida útil.
Evaluaciones de clientes para CHECK-MATE INDUSTRIES 9MM MAGAZINE, 9-RD
Número de evaluaciones: 7
De brownells.com: 7
Evaluación media: 4
No go with HP's(01/07/2010)
I got this to use in an STI 9mm 1911 and it will not work with 9rds of HP but will work with 9rds of FMJ's sent back to Check-mate and still dose not work right
Works Great with 1911 STI(19/11/2010)
Bought 10 mags for use with a STI 1911 in 9mm.shot 3 boxes of Federal ([...]) 115gr fmj.not one single problem, also de gun is new.with 124g Montana, reloads with a minor power factor, 2 FTF, L 1.150. Well made mags.Buy the Ed Brown pads, 6 in a bag, perfect fit.Also part of the FTF was that the Recoil Spring is not for the lower loads od the reloads.I shoot USPSA 6 times a month (700-800 Rds)Also IDPA twice a month
Good Buy(03/01/2011)
Nice mags. Bought three for my STI sentry 9mm and they work very well. One mag was a little tight putting in the ninth round, but it loosened up after a range session. Other than that no problems. Will buy more in the future. I'd give 'em five stars if the base plate was removable and holes were threaded. Ed Brown bumper pads worked well, though.
Meh, might be the gun, but I think not(01/02/2012)
I bought three of these magazines to go with the Caspian 9mm 1911 I built for my wife. There is a lot of variation in these magazines, as two go into the magwell pretty easily, but the third does not--feels like the body of the magazine is too wide for the frame.
When test firing the gun (please take note of this--this was my first time firing the gun), the rounds seemed to have a tendency to nose dive into the (admittedly) short ramp on the Kart EZ Fit barrel I installed. This happened just about every round.
Also, the rounds do not seat all the way to the rear of the magazine, often feeling like the slide doesn't get a good bite onto the back of the case to feed it into the chamber properly.
Putting the last round into the magazine was pretty bad, too.
Please keep in mind, I also only fired 100 rounds during this first range session, so it was about 33-34 rounds per magazine. They may loosen up over time--I'm not convinced, however.
I am also using an STI Recoil Master, so I don't know if that's causing the problem. I do know, however, that I've had to push the rounds around after feeding them into the magazine to get them to push the nose of the bullet above the front lip of the magazine body.
I want to try a couple of different magazine types, but at this time, I can't recommend these magazines for someone who needs the gun to be completely reliable.
And who doesn't want that?
Check-Mate 9mm Mags(18/08/2012)
I have been using these in a 9mm Combat Commander for IPSC Competition. I have had no feed issues and they drop cleanly from the pistol.
Excellent build(26/07/2014)
Received the mags today and have to say, these are so good I will be changing the factory mags from my STI Spartan to these for a full set. The build quality is outstanding and the follower sits the cartridge up high for a smooth reliable feed.
Best mag for my 9 mm SA RO(26/09/2014)
Great product and great price. They are cheaper here than through SA.
N.º de producto: 100004787 CHECK-MATE INDUSTRIES 9MM MAGAZINE, 9-RD Ref Fabricante: CM9MM9S850020492329 Estos cargadores de alta calidad tienen un contorno único de labio de alimentación recto que ayuda a mantener un ángulo de alimentación constante para un recamar confiable de munición de 9mm. El tubo del cuerpo está endurecido al máximo para una mayor resistencia y durabilidad, luego pulido por dentro y por fuera para eliminar la fricción. El seguidor tiene una falda frontal extendida, un acabado anti-fricción de película seca, y una colocación precisa de los puntos de apoyo para una alimentación y función exactas con cada disparo. La base del cargador está pre-perforada para aceptar almohadillas de base atornillables de posventa (no incluidas) con una separación entre agujeros de .524". El resorte de alto rendimiento ofrece una fiabilidad excepcional y una larga vida útil.
42.9EUR042,90 €
*
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Acabado:
Silver
Capacidad:
9-Round
Cartucho:
9 mm Luger
Hacer:
1911
Material:
Stainless Steel
Modelo:
Government,Commander
Peso de entrega: 0,113kgAltura de envío: 33mmAncho de envío: 117mmLongitud de envío: 262mm
Detalles del artículo
Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.x
Estos artículos están controlados por el gobierno de los EE. UU. Y autorizados para exportar solo al país de destino final para que los utilicen el destinatario final o el / los usuario (s) final (es) aquí identificado (s). No pueden ser revendidos, transferidos ni eliminados de otra manera, para cualquier otro país o a cualquier otra persona que no sea el destinatario final o el (los) usuario (s) final (es) autorizado (s), ya sea en su forma original o después de haber sido incorporados a otros artículos, sin obtener primero la aprobación del Gobierno de los EE. UU. de su ley y regulaciones.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Unique Feed Lip Geometry Maintains A Consistent Angle For Reliable Feeding
These high-quality magazines have a unique, straight feed lip contour that helps maintain a consistent feed angle for reliable chambering of 9mm ammo. Body tube is through-hardened for superior strength and durability, then polished inside and out to eliminate drag. Follower has an extended front skirt, an anti-friction dry-film finish, and proper dimple placement for precise feed and function with every round. Floorplate is pre-drilled to accept aftermarket screw-on base pads (not included) with .524" center-to-center hole spacing. High-performance spring offers outstanding reliability and long life.
SPECS: Stainless steel, natural silver finish.
Más...
Geometría Única de Labio de Alimentación Mantiene un Ángulo Constante para una Alimentación Fiable
Estos cargadores de alta calidad tienen un contorno único de labio de alimentación recto que ayuda a mantener un ángulo de alimentación constante para un recamar confiable de munición de 9mm. El tubo del cuerpo está endurecido al máximo para una mayor resistencia y durabilidad, luego pulido por dentro y por fuera para eliminar la fricción. El seguidor tiene una falda frontal extendida, un acabado anti-fricción de película seca, y una colocación precisa de los puntos de apoyo para una alimentación y función exactas con cada disparo. La base del cargador está pre-perforada para aceptar almohadillas de base atornillables de posventa (no incluidas) con una separación entre agujeros de .524". El resorte de alto rendimiento ofrece una fiabilidad excepcional y una larga vida útil.
Evaluaciones de clientes para CHECK-MATE INDUSTRIES 9MM MAGAZINE, 9-RD
Número de evaluaciones: 7
De brownells.com: 7
Evaluación media: 4
No go with HP's(01/07/2010)
I got this to use in an STI 9mm 1911 and it will not work with 9rds of HP but will work with 9rds of FMJ's sent back to Check-mate and still dose not work right
Works Great with 1911 STI(19/11/2010)
Bought 10 mags for use with a STI 1911 in 9mm.shot 3 boxes of Federal ([...]) 115gr fmj.not one single problem, also de gun is new.with 124g Montana, reloads with a minor power factor, 2 FTF, L 1.150. Well made mags.Buy the Ed Brown pads, 6 in a bag, perfect fit.Also part of the FTF was that the Recoil Spring is not for the lower loads od the reloads.I shoot USPSA 6 times a month (700-800 Rds)Also IDPA twice a month
Good Buy(03/01/2011)
Nice mags. Bought three for my STI sentry 9mm and they work very well. One mag was a little tight putting in the ninth round, but it loosened up after a range session. Other than that no problems. Will buy more in the future. I'd give 'em five stars if the base plate was removable and holes were threaded. Ed Brown bumper pads worked well, though.
Meh, might be the gun, but I think not(01/02/2012)
I bought three of these magazines to go with the Caspian 9mm 1911 I built for my wife. There is a lot of variation in these magazines, as two go into the magwell pretty easily, but the third does not--feels like the body of the magazine is too wide for the frame.
When test firing the gun (please take note of this--this was my first time firing the gun), the rounds seemed to have a tendency to nose dive into the (admittedly) short ramp on the Kart EZ Fit barrel I installed. This happened just about every round.
Also, the rounds do not seat all the way to the rear of the magazine, often feeling like the slide doesn't get a good bite onto the back of the case to feed it into the chamber properly.
Putting the last round into the magazine was pretty bad, too.
Please keep in mind, I also only fired 100 rounds during this first range session, so it was about 33-34 rounds per magazine. They may loosen up over time--I'm not convinced, however.
I am also using an STI Recoil Master, so I don't know if that's causing the problem. I do know, however, that I've had to push the rounds around after feeding them into the magazine to get them to push the nose of the bullet above the front lip of the magazine body.
I want to try a couple of different magazine types, but at this time, I can't recommend these magazines for someone who needs the gun to be completely reliable.
And who doesn't want that?
Check-Mate 9mm Mags(18/08/2012)
I have been using these in a 9mm Combat Commander for IPSC Competition. I have had no feed issues and they drop cleanly from the pistol.
Excellent build(26/07/2014)
Received the mags today and have to say, these are so good I will be changing the factory mags from my STI Spartan to these for a full set. The build quality is outstanding and the follower sits the cartridge up high for a smooth reliable feed.
Best mag for my 9 mm SA RO(26/09/2014)
Great product and great price. They are cheaper here than through SA.
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.