AR owners know the importance of a clean bolt and bolt carrier group. Carbon and fouling can build-up in these areas, causing jams and malfunctions. The B.O.N.E.® Tool was designed specifically to clean the bolt carrier assembly area of 5.56 rifles. This quick-clean tool serves four purposes- Scrapes carbon and fouling from the: Bolt Bolt Carrier Firing Pin Includes a 8-32 threaded hole to act as a T-handle Note: While this tool fits many bolts flawlessly, it may fit some bolts better than others due to variance in bolts by different manufacturers.
For .223 cal./5.56mm Modern Sporting Rifles
Más...
Los propietarios de AR saben la importancia de mantener limpio el cerrojo y el grupo portacerrojo. La carbonilla y los residuos pueden acumularse en estas áreas, provocando atascos y fallos de funcionamiento. La herramienta B.O.N.E.® fue diseñada específicamente para limpiar el área del conjunto portacerrojo de rifles 5.56. Esta herramienta de limpieza rápida cumple cuatro funciones: Raspa la carbonilla y los residuos del: Cerrojo Portacerrojo Percutor Incluye un orificio roscado de 8-32 para actuar como una T-handle Nota: Aunque esta herramienta se ajusta a muchos cerrojos a la perfección, puede que se ajuste mejor a algunos cerrojos que a otros debido a la variación en los cerrojos de diferentes fabricantes.
Para rifles deportivos modernos cal. .223/5.56mm
Más...
Evaluaciones de clientes para OTIS 5.56 B.O.N.E BOLT CARRIER ASSEMBLY CLEANING TOOL
Número de evaluaciones: 5
De brownells.com: 5
Evaluación media: 3
Best item for those hard to clean places(28/12/2013)
I had some build up on an AR that I built a few years ago. This tool took care of all the carbon without any CLP or solvents. I would highly recommend this to any AR owner; so much so much so that I gave these tools for Christmas presents to all my friends.
Makes short work out of cleaning (08/01/2015)
Got the .223 / 5.56 version and .308 version and they make short work out of cleaning the Carier Bolt Group (CBG) after doing a lot of shooting especially with dirty ammo. These probably aren't necessary for light shooting. Just a light wipe down with oil wipes but Deff nice to have around.
Fancy paper weight(13/05/2015)
This product promises much but doesn't deliver. It is too big in diameter to fit in any of my Bushmaster AR-15 bolts. The end of the tool to scrape the back of the bolt head works no better than a old worn out brass brush, the same can be said for the so called firing pin scraper. If you need a bolt scraper there are better on the market such as the Sinclair Mark Brown ones.
All show....... No go(13/08/2015)
All promise and very little performance. Used on 2 COLT BCG's (Old green label as well as a current production model) with little success. Sorry OTIS, this one is a washout! It's going back to Brownells.
Not Good(10/07/2017)
I have tried to use this product on multiple brands of rifles, with really no success. It does not scrap close enough to get all the carbon off. All still required the standard cleaning methods to finish it.
N.º de producto: 668000129 OTIS 5.56 B.O.N.E BOLT CARRIER ASSEMBLY CLEANING TOOL Ref Fabricante: FG-246014895000267 Los propietarios de AR saben la importancia de mantener limpio el cerrojo y el grupo portacerrojo. La carbonilla y los residuos pueden acumularse en estas áreas, provocando atascos y fallos de funcionamiento. La herramienta B.O.N.E.® fue diseñada específicamente para limpiar el área del conjunto portacerrojo de rifles 5.56. Esta herramienta de limpieza rápida cumple cuatro funciones: Raspa la carbonilla y los residuos del: Cerrojo Portacerrojo Percutor Incluye un orificio roscado de 8-32 para actuar como una T-handle Nota: Aunque esta herramienta se ajusta a muchos cerrojos a la perfección, puede que se ajuste mejor a algunos cerrojos que a otros debido a la variación en los cerrojos de diferentes fabricantes.
45.9EUR045,90 €
*
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
AR owners know the importance of a clean bolt and bolt carrier group. Carbon and fouling can build-up in these areas, causing jams and malfunctions. The B.O.N.E.® Tool was designed specifically to clean the bolt carrier assembly area of 5.56 rifles. This quick-clean tool serves four purposes- Scrapes carbon and fouling from the: Bolt Bolt Carrier Firing Pin Includes a 8-32 threaded hole to act as a T-handle Note: While this tool fits many bolts flawlessly, it may fit some bolts better than others due to variance in bolts by different manufacturers.
For .223 cal./5.56mm Modern Sporting Rifles
Más...
Los propietarios de AR saben la importancia de mantener limpio el cerrojo y el grupo portacerrojo. La carbonilla y los residuos pueden acumularse en estas áreas, provocando atascos y fallos de funcionamiento. La herramienta B.O.N.E.® fue diseñada específicamente para limpiar el área del conjunto portacerrojo de rifles 5.56. Esta herramienta de limpieza rápida cumple cuatro funciones: Raspa la carbonilla y los residuos del: Cerrojo Portacerrojo Percutor Incluye un orificio roscado de 8-32 para actuar como una T-handle Nota: Aunque esta herramienta se ajusta a muchos cerrojos a la perfección, puede que se ajuste mejor a algunos cerrojos que a otros debido a la variación en los cerrojos de diferentes fabricantes.
Para rifles deportivos modernos cal. .223/5.56mm
Más...
Evaluaciones de clientes para OTIS 5.56 B.O.N.E BOLT CARRIER ASSEMBLY CLEANING TOOL
Número de evaluaciones: 5
De brownells.com: 5
Evaluación media: 3
Best item for those hard to clean places(28/12/2013)
I had some build up on an AR that I built a few years ago. This tool took care of all the carbon without any CLP or solvents. I would highly recommend this to any AR owner; so much so much so that I gave these tools for Christmas presents to all my friends.
Makes short work out of cleaning (08/01/2015)
Got the .223 / 5.56 version and .308 version and they make short work out of cleaning the Carier Bolt Group (CBG) after doing a lot of shooting especially with dirty ammo. These probably aren't necessary for light shooting. Just a light wipe down with oil wipes but Deff nice to have around.
Fancy paper weight(13/05/2015)
This product promises much but doesn't deliver. It is too big in diameter to fit in any of my Bushmaster AR-15 bolts. The end of the tool to scrape the back of the bolt head works no better than a old worn out brass brush, the same can be said for the so called firing pin scraper. If you need a bolt scraper there are better on the market such as the Sinclair Mark Brown ones.
All show....... No go(13/08/2015)
All promise and very little performance. Used on 2 COLT BCG's (Old green label as well as a current production model) with little success. Sorry OTIS, this one is a washout! It's going back to Brownells.
Not Good(10/07/2017)
I have tried to use this product on multiple brands of rifles, with really no success. It does not scrap close enough to get all the carbon off. All still required the standard cleaning methods to finish it.
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.