Screwdriver Handle Gives You Added Control; Spring Steel Collet Is Gentle On The Softest Aluminum
Headache-saving tool includes an adjustable, spring steel collet that positively and delicately holds the globe of the sight for easy, damage-free installation. The spring steel is gentle on the sight beads, plus stands up to repeated use for a long service life. A Brownells screwdriver handle improves your control to tightly screw in the sights without damage to them or the barrel. Available in Small and Large to accommodate practically any sized sight bead.
SPECS: Plastic handle, spring steel collet. Small - 1" (2.54cm) diameter handle. Installs sight beads with diameters between .050" (1.3mm) to .125" (3.2mm). Large - 1-7/64" (2.82cm) diameter handle. Installs sight beads with diameters between .115" (2.9mm) to .188" (4.8mm).
Más...
Mango de Destornillador para Mayor Control; Collet de Acero de Resorte es Suave con el Aluminio Más Blando
Esta herramienta que ahorra dolores de cabeza incluye un collet de acero de resorte ajustable que sostiene de manera positiva y delicada la esfera de la mira para una instalación fácil y sin daños. El acero de resorte es suave con las cuentas de las miras, además de resistir al uso repetido para una larga vida útil. Un mango de destornillador Brownells mejora tu control para apretar las miras firmemente sin dañarlas ni al cañón. Disponible en tamaños Pequeño y Grande para acomodar prácticamente cualquier tamaño de cuenta de mira.
ESPECIFICACIONES: Mango de plástico, collet de acero de resorte. Pequeño - Mango de 1" (2.54cm) de diámetro. Instala miras de cuentas con diámetros entre .050" (1.3mm) y .125" (3.2mm). Grande - Mango de 1-7/64" (2.82cm) de diámetro. Instala miras de cuentas con diámetros entre .115" (2.9mm) y .188" (4.8mm).
Más...
Evaluaciones de clientes para BROWNELLS ALL DIAMETER SHOTGUN SIGHT INSTALLER LARGE
Número de evaluaciones: 3
De brownells.com: 3
Evaluación media: 2,3
Good tool(15/01/2015)
The only way to go if you need to screw in a 1/16" middle shotgun bead. This tool is a "frustration reducer" that can be used to screw in anything that is very small.
Not what it should be(08/05/2015)
I bought this to change the beads on my Ruger Red Label. The mid bead is only 1/16". I purchased the "small" diameter, but, it will not tighten on a bead that small. The other problem was the handle. It was loose right out of the package. During use, it actually came off. Not my best purchase.
Deserves â0â stars(28/03/2018)
This thing is a joke and does not work, even with heat applied. It just clamps on the bead and spins. The bead in the brownells video is clearly already loosend before the video. I would give it 0 stars if I could.
N.º de producto: 080000094 BROWNELLS ALL DIAMETER SHOTGUN SIGHT INSTALLER LARGE Esta herramienta que ahorra dolores de cabeza incluye un collet de acero de resorte ajustable que sostiene de manera positiva y delicada la esfera de la mira para una instalación fácil y sin daños. El acero de resorte es suave con las cuentas de las miras, además de resistir al uso repetido para una larga vida útil. Un mango de destornillador Brownells mejora tu control para apretar las miras firmemente sin dañarlas ni al cañón. Disponible en tamaños Pequeño y Grande para acomodar prácticamente cualquier tamaño de cuenta de mira.
36.9EUR036,90 €
*
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Hacer:
Universal Shotguns
Peso de entrega: 0,023kgAltura de envío: 26mmAncho de envío: 34mmLongitud de envío: 216mm
Detalles del artículo
Hecho en USA
N.º de producto: 080000093 BROWNELLS ALL DIAMETER SHOTGUN SIGHT INSTALLER SMALL Esta herramienta que ahorra dolores de cabeza incluye un collet de acero de resorte ajustable que sostiene de manera positiva y delicada la esfera de la mira para una instalación fácil y sin daños. El acero de resorte es suave con las cuentas de las miras, además de resistir al uso repetido para una larga vida útil. Un mango de destornillador Brownells mejora tu control para apretar las miras firmemente sin dañarlas ni al cañón. Disponible en tamaños Pequeño y Grande para acomodar prácticamente cualquier tamaño de cuenta de mira.
33.9EUR033,90 €
*
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Screwdriver Handle Gives You Added Control; Spring Steel Collet Is Gentle On The Softest Aluminum
Headache-saving tool includes an adjustable, spring steel collet that positively and delicately holds the globe of the sight for easy, damage-free installation. The spring steel is gentle on the sight beads, plus stands up to repeated use for a long service life. A Brownells screwdriver handle improves your control to tightly screw in the sights without damage to them or the barrel. Available in Small and Large to accommodate practically any sized sight bead.
SPECS: Plastic handle, spring steel collet. Small - 1" (2.54cm) diameter handle. Installs sight beads with diameters between .050" (1.3mm) to .125" (3.2mm). Large - 1-7/64" (2.82cm) diameter handle. Installs sight beads with diameters between .115" (2.9mm) to .188" (4.8mm).
Más...
Mango de Destornillador para Mayor Control; Collet de Acero de Resorte es Suave con el Aluminio Más Blando
Esta herramienta que ahorra dolores de cabeza incluye un collet de acero de resorte ajustable que sostiene de manera positiva y delicada la esfera de la mira para una instalación fácil y sin daños. El acero de resorte es suave con las cuentas de las miras, además de resistir al uso repetido para una larga vida útil. Un mango de destornillador Brownells mejora tu control para apretar las miras firmemente sin dañarlas ni al cañón. Disponible en tamaños Pequeño y Grande para acomodar prácticamente cualquier tamaño de cuenta de mira.
ESPECIFICACIONES: Mango de plástico, collet de acero de resorte. Pequeño - Mango de 1" (2.54cm) de diámetro. Instala miras de cuentas con diámetros entre .050" (1.3mm) y .125" (3.2mm). Grande - Mango de 1-7/64" (2.82cm) de diámetro. Instala miras de cuentas con diámetros entre .115" (2.9mm) y .188" (4.8mm).
Más...
Evaluaciones de clientes para BROWNELLS ALL DIAMETER SHOTGUN SIGHT INSTALLER LARGE
Número de evaluaciones: 3
De brownells.com: 3
Evaluación media: 2,3
Good tool(15/01/2015)
The only way to go if you need to screw in a 1/16" middle shotgun bead. This tool is a "frustration reducer" that can be used to screw in anything that is very small.
Not what it should be(08/05/2015)
I bought this to change the beads on my Ruger Red Label. The mid bead is only 1/16". I purchased the "small" diameter, but, it will not tighten on a bead that small. The other problem was the handle. It was loose right out of the package. During use, it actually came off. Not my best purchase.
Deserves â0â stars(28/03/2018)
This thing is a joke and does not work, even with heat applied. It just clamps on the bead and spins. The bead in the brownells video is clearly already loosend before the video. I would give it 0 stars if I could.
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.