Solves Cycling Problems Caused By Carbon Buildup In Bolt Recess
Breaks loose and removes hard-to-get-at carbon buildup without damaging the bolt carrier. Quickly solves function-related cycling problems caused by excessive carbon deposits inside the bolt recess. Hardened steel scraper tip will last indefinitely with proper use.
Resuelve Problemas de Ciclado Causados por la Acumulación de Carbón en el Hueco del Cerrojo
Elimina y remueve la acumulación de carbón difícil de alcanzar sin dañar el portador del cerrojo. Resuelve rápidamente los problemas de funcionamiento relacionados con el ciclo causados por depósitos excesivos de carbón dentro del hueco del cerrojo. La punta del rascador de acero endurecido durará indefinidamente con un uso adecuado.
ESPECIFICACIONES: Reamer de acero, mango de plástico. 6½" (16cm) de largo.
Más...
Evaluaciones de clientes para MARK BROWN CUSTOM AR-15/M16 CARBON SCRAPER
Número de evaluaciones: 4
De brownells.com: 4
Evaluación media: 3
nice to have as an extra tool(01/10/2009)
Nice tool to have, but doesn't replace your dental picks/small carbon scrapper. It scrapes away heavy build-up but does leave a thin coat of carbon that you still have to pick off with a dental pick/small carbon scrapper. Works best when you coat a bore patch with solvent, place it over the opening of the bolt carrier, then push it down with this tool, does a better job that way. All in all, I would say it cut my cleaning time for inside the bolt carrier down in half.
WASTE OF MONEY DO NOT BUY(12/02/2010)
THIS DOES NOT WORK YOU STILL HAVE TO CLEAN THE BOLT CARRIER THE OLD FASHION WAY Q-TIPS AND CLEANING ROD IVE BEEN SHOOTING THESE RIFLES FOR A LONG TIME AND STILL HAVENT FOUND ANYTHING TO MAKE THIS TEADIOUS TASK ANY EASIER
Handy tool(02/09/2012)
This is a repost from the one I made for the bolt radius scraper, because it applies equally to this tool as well.
I bought one of these about a year ago and have used it many times. It was not desingned to scrape metal to metal as this would remove finish, and possibly damage your weapon's parts. If you are like me and occaisonally buy the steel cased russian ammo, for the simple purpose of blasting to your heart's content on the cheap, this is a handy tool. for those who put their weapon to the test with lots of heavy shooting this is a handy tool. for the individual who may skip a cleaning or two again a handy tool. for the ultra picky with super clean handloads and white gloves don't get your hopes up, it only gets things started by taking off heavy buildup the rest is up to you.
Does what it is designed to do!(15/12/2012)
This tool was designed to remove heavy carbon build up and it does that very well. It was not designed to remove every spec of carbon, you do have to finish the job.
N.º de producto: 133100016 MARK BROWN CUSTOM AR-15/M16 CARBON SCRAPER Ref Fabricante: NONE Elimina y remueve la acumulación de carbón difícil de alcanzar sin dañar el portador del cerrojo. Resuelve rápidamente los problemas de funcionamiento relacionados con el ciclo causados por depósitos excesivos de carbón dentro del hueco del cerrojo. La punta del rascador de acero endurecido durará indefinidamente con un uso adecuado.
Solves Cycling Problems Caused By Carbon Buildup In Bolt Recess
Breaks loose and removes hard-to-get-at carbon buildup without damaging the bolt carrier. Quickly solves function-related cycling problems caused by excessive carbon deposits inside the bolt recess. Hardened steel scraper tip will last indefinitely with proper use.
Resuelve Problemas de Ciclado Causados por la Acumulación de Carbón en el Hueco del Cerrojo
Elimina y remueve la acumulación de carbón difícil de alcanzar sin dañar el portador del cerrojo. Resuelve rápidamente los problemas de funcionamiento relacionados con el ciclo causados por depósitos excesivos de carbón dentro del hueco del cerrojo. La punta del rascador de acero endurecido durará indefinidamente con un uso adecuado.
ESPECIFICACIONES: Reamer de acero, mango de plástico. 6½" (16cm) de largo.
Más...
Evaluaciones de clientes para MARK BROWN CUSTOM AR-15/M16 CARBON SCRAPER
Número de evaluaciones: 4
De brownells.com: 4
Evaluación media: 3
nice to have as an extra tool(01/10/2009)
Nice tool to have, but doesn't replace your dental picks/small carbon scrapper. It scrapes away heavy build-up but does leave a thin coat of carbon that you still have to pick off with a dental pick/small carbon scrapper. Works best when you coat a bore patch with solvent, place it over the opening of the bolt carrier, then push it down with this tool, does a better job that way. All in all, I would say it cut my cleaning time for inside the bolt carrier down in half.
WASTE OF MONEY DO NOT BUY(12/02/2010)
THIS DOES NOT WORK YOU STILL HAVE TO CLEAN THE BOLT CARRIER THE OLD FASHION WAY Q-TIPS AND CLEANING ROD IVE BEEN SHOOTING THESE RIFLES FOR A LONG TIME AND STILL HAVENT FOUND ANYTHING TO MAKE THIS TEADIOUS TASK ANY EASIER
Handy tool(02/09/2012)
This is a repost from the one I made for the bolt radius scraper, because it applies equally to this tool as well.
I bought one of these about a year ago and have used it many times. It was not desingned to scrape metal to metal as this would remove finish, and possibly damage your weapon's parts. If you are like me and occaisonally buy the steel cased russian ammo, for the simple purpose of blasting to your heart's content on the cheap, this is a handy tool. for those who put their weapon to the test with lots of heavy shooting this is a handy tool. for the individual who may skip a cleaning or two again a handy tool. for the ultra picky with super clean handloads and white gloves don't get your hopes up, it only gets things started by taking off heavy buildup the rest is up to you.
Does what it is designed to do!(15/12/2012)
This tool was designed to remove heavy carbon build up and it does that very well. It was not designed to remove every spec of carbon, you do have to finish the job.