Su cesta está vacía.

Cesta

926-532900

Suscribirse al boletín

DOUBLE STAR
AR-15/M16 TWANG BUSTER

841348104704 100005392

Stops Annoying Buffer Noise During Recoil

Low-friction Delrin disk fits on the end of the buffer spring, opposite the buffer, and stops the annoying "twang" of the buffer hitting the rear of the receiver extension during recoil. Quick, easy installation, with no permanent alterations to gun. Simply remove buffer and spring, insert Twang Buster, then reinstall buffer and spring.

SPECS: Machined Delrin thermoplastic, black. Fits A2 rifle and M4-style carbine buffer spring/receiver extension tubes.

Más...

Detiene el Molesto Ruido del Buffer Durante el Retroceso

El disco de Delrin de baja fricción se coloca en el extremo del muelle de recuperación, opuesto al buffer, y detiene el molesto "twang" del buffer golpeando la parte trasera del tubo de extensión del receptor durante el retroceso. Instalación rápida y fácil, sin alteraciones permanentes en el arma. Simplemente retira el buffer y el muelle, inserta el Twang Buster y luego vuelve a instalar el buffer y el muelle.

ESPECIFICACIONES: Delrin mecanizado termoplástico, negro. Compatible con tubos de extensión de muelle de recuperación y receptor para rifles A2 y carabinas estilo M4.

Más...

Evaluaciones de clientes para DOUBLE STAR TWANG BUSTER

Número de evaluaciones: 12
De brownells.com: 12
Evaluación media: 2,9

Not bad (12/08/2010)

Does what it says although it causes bolt catch to malfuntion

works good (27/11/2010)

ive had it for 3 months works and have never had any problems with my rifle.
would def recamend it.

Can be problematic. (17/08/2011)

It does reduce the twang as it says, but in my RRA it reduced the bolt stroke enough that my bold catch would not catch every time. It also caused my bolt to short stroke on occasion and jam the rifle. If you buy this, before installing lock back your bolt and carrier all the way by hand, hold it there and visual check the distance between your bolt face and bolt catch. After installing the buster check that gap again to see if you still have enough to compensate for loads that may not be full power. My RRA went from about a little less than a 1/4" gap to about 10 thousands only. Just thoroughly check function before relying on it.

Meh.. (06/09/2011)

Does stop the annoying twang but it prevented the bolt catch from operating properly on my DPMS AP4. All in all, if you need your bolt catch to work I'd avoid this device, if you don't care about the bolt catch give it a shot.

DO NOT BUY JUNK (05/10/2011)

MADE MY BOLT CATCH INOPERABLE

Ok part (20/12/2011)

It does what it's supposed to do in regards to quieting down the spring noise. But it does have the annoying habit of not letting the bolt lock all the way back after the last round is fired. Not sure if this is due to the combo of running the recoil pad too.
When I installed this I was only using .223 55gr, when I stepped up to 5.56 62gr, the issue was not there as often. I'll use it some more, but we'll see what happens in the next 300+rds.

works well in my 9mm dpms style ar (22/05/2012)

I bought one for my 9mm ar, and it worked perfectly, so I bought several more, and havn't had a single problem. Some of those over-power springs have a few extra coils, so the spring is longer when fully compressed. That may be the problem that others are having. If 1/16 inch piece of plastic is going to prevent your bolt from going all the way back, get a better spring. Those flat wire springs work great! Brownells # 452-000-119WB or 840-000-048WB

It deserves a higher rating. It works. (23/09/2012)

This product does everthing it says and nothing it does not. I install these in every AR I own and it does take the "twang" that all AR's make when fired. Anything to help make the weapon quieter is a good thing. If the "twang doesn't bother you, don't buy it. If you want that sound eliminated completely then I highly recommend it because it does do what it says.

Waste of money. (23/05/2014)

Installed and it did nothing. I removed it, re-read the instructions and re-installed. Still nothing. Changed springs to flat wire JP springs. Still no busting of the twang was going on in my full length A2 stock.

Works (22/10/2014)

Works as it claims. If Your having bolt locking problems in all likelihood your spring is A: too long or B: too stiff or C: A&B.

Had a friend with locking issues & his spring was using wire that was 0.005" thicker than mine. We swapped springs & swapped which rifle had the problem.

Save yer money (18/12/2014)

It's really the spring in the tube of the stock that "twangs" and this does nothing for that - in fact after installing it, the bolt wouldn't lock up manually or after the last shot. Can't return these fast enough.

Does not work as advertised, (22/05/2017)

I purchased the twang buster and installed it my Palmetto State Armory A2 lower buffer assembley. This product does absolutely nothing to reduce the sound of the buffer working, causes the buffer to bottom out too soon- resulting in excess wear on the face of the buffer being smashed by the bolt carrier, and as a kicker, is incredibly difficult to remove once installed. Do not purchase this item. Waste of time, waste of money, causes excess wear on your firearm.

Leer 12 mas calificaciones en brownells.com

14.9 14.9 1 EUR

N.º de producto: 100005392
DOUBLE STAR TWANG BUSTER
Ref Fabricante: JT140 841348104704 El disco de Delrin de baja fricción se coloca en el extremo del muelle de recuperación, opuesto al buffer, y detiene el molesto "twang" del buffer golpeando la parte trasera del tubo de extensión del receptor durante el retroceso. Instalación rápida y fácil, sin alteraciones permanentes en el arma. Simplemente retira el buffer y el muelle, inserta el Twang Buster y luego vuelve a instalar el buffer y el muelle.

14.9 EUR 0 14,90 € *

Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.

Caracteristicas: Color: Black Hacer: AR-15 Material: Thermoplastic

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Atributos

Color: Black Hacer: AR-15 Material: Thermoplastic Peso de entrega: 0,005kg Ancho de envío: 76mm Longitud de envío: 89mm

Detalles del artículo

Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.x

Stops Annoying Buffer Noise During Recoil

SPECS: Machined Delrin thermoplastic, black. Fits A2 rifle and M4-style carbine buffer spring/receiver extension tubes.

Más...

Detiene el Molesto Ruido del Buffer Durante el Retroceso

ESPECIFICACIONES: Delrin mecanizado termoplástico, negro. Compatible con tubos de extensión de muelle de recuperación y receptor para rifles A2 y carabinas estilo M4.

Más...

Evaluaciones de clientes para DOUBLE STAR TWANG BUSTER

Número de evaluaciones: 12
De brownells.com: 12
Evaluación media: 2,9

Not bad (12/08/2010)

Does what it says although it causes bolt catch to malfuntion

works good (27/11/2010)

ive had it for 3 months works and have never had any problems with my rifle.
would def recamend it.

Can be problematic. (17/08/2011)

Meh.. (06/09/2011)

DO NOT BUY JUNK (05/10/2011)

MADE MY BOLT CATCH INOPERABLE

Ok part (20/12/2011)

works well in my 9mm dpms style ar (22/05/2012)

It deserves a higher rating. It works. (23/09/2012)

Waste of money. (23/05/2014)

Works (22/10/2014)

Save yer money (18/12/2014)

Does not work as advertised, (22/05/2017)

Leer 12 mas calificaciones en brownells.com

Los clientes compraron

New

MAGPUL DUST COVERS, BLACK, 3-PAK
AR-15/M16 PMAG MOE M2 DUST COVERS

MAGPUL

En stock

11,90 € *

Magazine Hardware

WEAVER #36M, #35M BASE SET*
TOP MOUNT BASES - #11-#62

WEAVER

En stock

23,90 € * 12,90 € - 44,90 €*

Bases para Arma larga

4,1

New

LUTH-AR AR-15 GAS TUBE STAINLESS STEEL RIFLE
AR-15 GAS TUBE STAINLESS STEEL

LUTH-AR

En stock

36,90 € * 25,90 € - 36,90 €*

Gas Tubes

ED BROWN SLIDE BUFFERS, 6 PACK
1911 SLIDE BUFFERS

ED BROWN

En stock

18,90 € *

Recoil Buffers

4,5

WHITWORTH TOOL AR-15 M4 BARREL EXTENSION STEEL UNFINISHED
AR-15 M4 BARREL EXTENSION

WHITWORTH TOOL

En stock

38,90 € *

Barrel Extension Parts

Identificarse

¿Ha olvidado su contraseña?
Registrarse

Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.

Redes Sociales

Navegacion

Categorias

Ordering

Servicio al cliente

¡Bienvenido!

Bienvenido a Brownells, la principal Armeria de accesorios de armas de fuego, piezas de armas y herramientas para armeros en España. En nuestra web podrá encontrar todo tipo de accesorios y repuestos para sus rifles, carabinas, escopetas o armas cortas. Si le gusta la caza o el tiro de precisión esta es su web.

La promesa de Brownells España

La promesa Brownells para nuestros clientes: TU SATISFACIÓN ESTÁ GARANTIZADA. Si por cualquier motivo no estás 100% satisfecho con cualquiera de los productos comprados a nosotros, se lo devolvemos o cambiamos.

Nuestra oferta

Si te gusta disparar, trabajar con armas como negocio o hobby, o simplemente poseer un arma, este es tu lugar. Durante más de 75 años, tiradores, armeros profesionales, aficionados, cuerpos de defensa y especialistas en armas han venido a Brownells.es por la alta calidad en sus piezas de armas y en los repuestos que ellos necesitan.

Encontrarás más de 90,000 incluyendo exclusivas piezas de armas, accesorios, herramientas para armeros, munición y otros productos para el manteniminto, reparación y mejora de tus pistolas.

Su equipo Brownells España

Armeria A. Izquierdo (B-13309356)