Tough, steel clamp captures the bolt head, and the large-handled turnscrew depresses the ejector so the ejector pin can be safely removed or installed. Set includes turnscrews to fit both Standard and Small bolt faces; also included are separate bolt head retainers. One will fit bolt bodies up to .720" diameter (standard and small bolt face) and the other will fit AR-15/M16 bolts only. Complete AR-15/M16 Bolt Ejector Tool also available separately. Tools work on bolts with plunger-style ejectors and forward-positioned locking lugs only.
SPECS: Steel, blued. Plastic handle. Includes instructions.
Más...
Eliminación más rápida de émbolo-estilo eyectores
Abrazadera de acero dura, capta la cabeza del perno y el destornillador grande mango deprime el eyector para que el perno del eyector puede ser quitado o instalado con seguridad. El sistema incluye turnscrews para caber tanto estándar como pequeño perno caras; también se incluyen los separados Perno cabeza retenedores. Uno ajuste perno cuerpos hasta. 720" diámetro (cara del cerrojo estándar y pequeñas) y el otro cabrá AR-15/M16 pernos solamente. Completa AR-15/M16 perno del eyector herramienta también disponibles por separado. Herramientas funcionan en los pernos con eyectores de émbolo-estilo y bloqueo de posición hacia adelante sólo con zapatas.
Especificaciones: acero pavonado. Mango de plástico. Incluye instrucciones de.
Más...
Evaluaciones de clientes para BROWNELLS BOLT EJECTOR TOOL SET
Número de evaluaciones: 6
De brownells.com: 6
Evaluación media: 2,3
not recommended(19/01/2010)
This tool is not recommended for ar bolts. It moves around too much when trying to drive roll pin out and does not secure the bolt .
Great Tool(09/04/2011)
Works exactly as advertised
Economical tool for the job(30/04/2012)
Read the instructions... My only gripe is one thing,"You have to clamp it real good while installing the roll pin.
Needs offset(20/04/2014)
Worked ok, but with AR bolt ejector, would be better if screw in device was offset to engage ejector and not in center.
fell apart(29/09/2014)
The cylinder section in the handle fell out. Seemed like it would work great but I can't tighten the driver part of the tool to depress the ejector.
A disappointment. Failed(01/03/2015)
After 38 years of trying to remove the AR ejector without assistance I finally broke down and purchased this tool. It did not hold up. The jaws bent. The handle separated. It was marginally helpful at best. I upgraded to the more expensive but much better Brownell's ejector tool that can be placed on the bench. The more expensive tool is far superior and makes ejector removal a snap.
N.º de producto: 080792100 BROWNELLS BOLT EJECTOR TOOL SET Abrazadera de acero dura, capta la cabeza del perno y el destornillador grande mango deprime el eyector para que el perno del eyector puede ser quitado o instalado con seguridad. El sistema incluye turnscrews para caber tanto estándar como pequeño perno caras; también se incluyen los separados Perno cabeza retenedores. Uno ajuste perno cuerpos hasta. 720" diámetro (cara del cerrojo estándar y pequeñas) y el otro cabrá AR-15/M16 pernos solamente. Completa AR-15/M16 perno del eyector herramienta también disponibles por separado. Herramientas funcionan en los pernos con eyectores de émbolo-estilo y bloqueo de posición hacia adelante sólo con zapatas.
48.9EUR048,90 €
*
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Hacer:
AR-15
Peso de entrega: 0,181kgAltura: 10mmAnchura: 41mmLongitud: 132mm
Detalles del artículo
Hecho en USA
Sale
N.º de producto: 080792002 BROWNELLS AR-15/M16 BOLT EJECTOR TOOL Abrazadera de acero dura, capta la cabeza del perno y el destornillador grande mango deprime el eyector para que el perno del eyector puede ser quitado o instalado con seguridad. El sistema incluye turnscrews para caber tanto estándar como pequeño perno caras; también se incluyen los separados Perno cabeza retenedores. Uno ajuste perno cuerpos hasta. 720" diámetro (cara del cerrojo estándar y pequeñas) y el otro cabrá AR-15/M16 pernos solamente. Completa AR-15/M16 perno del eyector herramienta también disponibles por separado. Herramientas funcionan en los pernos con eyectores de émbolo-estilo y bloqueo de posición hacia adelante sólo con zapatas.
29.9EUR1329,90 €
*33,60 €
Plazo de entrega de aproximadamente 14-21 días. Más de 10 pcs. en almacén de EE.UU.
Tough, steel clamp captures the bolt head, and the large-handled turnscrew depresses the ejector so the ejector pin can be safely removed or installed. Set includes turnscrews to fit both Standard and Small bolt faces; also included are separate bolt head retainers. One will fit bolt bodies up to .720" diameter (standard and small bolt face) and the other will fit AR-15/M16 bolts only. Complete AR-15/M16 Bolt Ejector Tool also available separately. Tools work on bolts with plunger-style ejectors and forward-positioned locking lugs only.
SPECS: Steel, blued. Plastic handle. Includes instructions.
Más...
Eliminación más rápida de émbolo-estilo eyectores
Abrazadera de acero dura, capta la cabeza del perno y el destornillador grande mango deprime el eyector para que el perno del eyector puede ser quitado o instalado con seguridad. El sistema incluye turnscrews para caber tanto estándar como pequeño perno caras; también se incluyen los separados Perno cabeza retenedores. Uno ajuste perno cuerpos hasta. 720" diámetro (cara del cerrojo estándar y pequeñas) y el otro cabrá AR-15/M16 pernos solamente. Completa AR-15/M16 perno del eyector herramienta también disponibles por separado. Herramientas funcionan en los pernos con eyectores de émbolo-estilo y bloqueo de posición hacia adelante sólo con zapatas.
Especificaciones: acero pavonado. Mango de plástico. Incluye instrucciones de.
Más...
Evaluaciones de clientes para BROWNELLS BOLT EJECTOR TOOL SET
Número de evaluaciones: 6
De brownells.com: 6
Evaluación media: 2,3
not recommended(19/01/2010)
This tool is not recommended for ar bolts. It moves around too much when trying to drive roll pin out and does not secure the bolt .
Great Tool(09/04/2011)
Works exactly as advertised
Economical tool for the job(30/04/2012)
Read the instructions... My only gripe is one thing,"You have to clamp it real good while installing the roll pin.
Needs offset(20/04/2014)
Worked ok, but with AR bolt ejector, would be better if screw in device was offset to engage ejector and not in center.
fell apart(29/09/2014)
The cylinder section in the handle fell out. Seemed like it would work great but I can't tighten the driver part of the tool to depress the ejector.
A disappointment. Failed(01/03/2015)
After 38 years of trying to remove the AR ejector without assistance I finally broke down and purchased this tool. It did not hold up. The jaws bent. The handle separated. It was marginally helpful at best. I upgraded to the more expensive but much better Brownell's ejector tool that can be placed on the bench. The more expensive tool is far superior and makes ejector removal a snap.
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.