Brownells Iberica - El mayor proveedor de accesorios para el Tiro, Piezas y herramientas del armero. España

EGW
CZ P10C LEUPOLD DELTAPOINT PRO SIGHT MOUNT

841370117093 296000542
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
79.9 79.9 1 EUR
Sale
N.º de producto: 296000542
EGW CZ P10C LEUPOLD DELTAPOINT PRO SIGHT MOUNT
Ref Fabricante: 49393 841370117093 Material: Aluminio 7075 Recubrimiento: Acabado mate en negro Longitud total: 1.811" Ancho total: .99" Herrajes de montaje: (2) Tornillos de cabeza redonda 6-32, (2) Tornillos de cabeza plana 6-32, (1) Tornillo de ajuste 6-32 Ajuste de punto rojo: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter Las miras de punto rojo de EGW están diseñadas para instalarse de izquierda a derecha (con el cañón mirando hacia adelante). La cola de milano tiene una conicidad progresiva para facilitar la instalación. Simplemente retira la mira trasera de tu arma y reemplázala con nuestro soporte para montar tu mira de punto rojo Vortex Viper/Venom, Burris FastFire o Docter. No se requieren modificaciones. Puedes quitar nuestro soporte y volver a colocar tu mira trasera en cualquier momento. Herrajes de montaje incluidos. Instrucciones de instalación: * Retira la mira trasera * Instala el soporte de mira EGW en la cola de milano * Aprieta el tornillo de ajuste (si es aplicable) * Coloca la mira de punto rojo en el soporte de mira EGW (colocar un pequeño trozo de papel entre la mira de punto rojo y el soporte de mira facilitará la extracción y evitará que el Loctite toque la mira de punto rojo). * Aplica Loctite azul a los tornillos de montaje proporcionados * Aprieta los tornillos de montaje a 15in/lbs 2 Tornillos de cabeza redonda - Proporcionados para las miras Vortex Viper y Venom 2 Tornillos de cabeza plana - Proporcionados para las miras Burris FastFire y Docter Los tornillos incluidos con este soporte requieren una llave allen de 5/64'' para la instalación.
79.9 EUR 0 79,90 € * 81,32 €
Notificar sobre disponibilidad
No disponible.
Caracteristicas: Color: Black Estilo: Tactical Hacer: CZ Material: Aluminio Modelo: P-10 Compact Numero de bases: 1-Piece

Atributos

Color: Black Estilo: Tactical Hacer: CZ Material: Aluminio Modelo: P-10 Compact Numero de bases: 1-Piece Peso de entrega: 0,036kg Altura de envío: 25mm Ancho de envío: 89mm Longitud de envío: 140mm

Detalles del artículo

Hecho en USA



Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
Newsletters