Trims The Rivet Tip To Make Broken Ejector Spring Removal Simple
Hollow-end mill fits in drill press, spot faces the front rivet to take off just the peened area. Often lets you re-peen the existing rivet and eliminate rebluing the receiver.
Recorta la punta del remache para facilitar la extracción del resorte eyector roto
Fresa de extremo hueco que se ajusta en la prensa de taladro, enfrenta el remache delantero para quitar solo el área repujada. A menudo permite volver a repujar el remache existente y eliminar la necesidad de reazular el receptor.
ESPECIFICACIONES: Eje de acero, cortador de acero endurecido. 2½" (6.3cm) de largo, diámetro del eje .31" (7.8mm). Diámetro del cortador .143" (3.6mm).
Más...
Evaluaciones de clientes para BROWNELLS REMINGTON 870 EJECTOR SPRING RIVET CUTTER
Número de evaluaciones: 1
De brownells.com: 1
Evaluación media: 5
Great investment!(10/02/2016)
This little rivet cutter made me save over $200 in gunsmithing work on my old 870 Wingmaster, which had been sitting in the gun safe for years because of a ''too-expensive-to-replace'' broken ejector spring. The instructions provided with the tool are very clear and allowed me, as indicated, to re-use the rivet to lock the new spring into the ejector. The only thing I did differently than prescribed by the instructions was to drive the rivet cutter down on the tiny rivet head by hand instead of using a press drill. The rivet cutter being very sharp and the rivet metal being very soft, I was afraid to ruin the rivet using a press drill. It took me 10 minutes to cut the rivet head slowly and safely by hand (clockwise twist of the fingers with little pressure).
N.º de producto: 080000040 BROWNELLS REMINGTON 870 EJECTOR SPRING RIVET CUTTER050806103825 Fresa de extremo hueco que se ajusta en la prensa de taladro, enfrenta el remache delantero para quitar solo el área repujada. A menudo permite volver a repujar el remache existente y eliminar la necesidad de reazular el receptor.
54.9EUR1254,90 €
*
Plazo de entrega de aproximadamente 14-21 días. Más de 10 pcs. en almacén de EE.UU.
Hacer:
Remington
Material:
Steel
Modelo:
870
Peso de entrega: 0,029kgAltura de envío: 8mmAncho de envío: 91mmLongitud de envío: 170mm
Detalles del artículo
Hecho en USA
Fresa de extremo hueco REMINGTON 870 EJECTOR SPRING RIVET CUTTER de BROWNELLS. Ideal para remover remaches sin dañar el receptor. Hecho de acero endurecido. ¡Descubre más! 🔧🔩
Trims The Rivet Tip To Make Broken Ejector Spring Removal Simple
Hollow-end mill fits in drill press, spot faces the front rivet to take off just the peened area. Often lets you re-peen the existing rivet and eliminate rebluing the receiver.
Recorta la punta del remache para facilitar la extracción del resorte eyector roto
Fresa de extremo hueco que se ajusta en la prensa de taladro, enfrenta el remache delantero para quitar solo el área repujada. A menudo permite volver a repujar el remache existente y eliminar la necesidad de reazular el receptor.
ESPECIFICACIONES: Eje de acero, cortador de acero endurecido. 2½" (6.3cm) de largo, diámetro del eje .31" (7.8mm). Diámetro del cortador .143" (3.6mm).
Más...
Evaluaciones de clientes para BROWNELLS REMINGTON 870 EJECTOR SPRING RIVET CUTTER
Número de evaluaciones: 1
De brownells.com: 1
Evaluación media: 5
Great investment!(10/02/2016)
This little rivet cutter made me save over $200 in gunsmithing work on my old 870 Wingmaster, which had been sitting in the gun safe for years because of a ''too-expensive-to-replace'' broken ejector spring. The instructions provided with the tool are very clear and allowed me, as indicated, to re-use the rivet to lock the new spring into the ejector. The only thing I did differently than prescribed by the instructions was to drive the rivet cutter down on the tiny rivet head by hand instead of using a press drill. The rivet cutter being very sharp and the rivet metal being very soft, I was afraid to ruin the rivet using a press drill. It took me 10 minutes to cut the rivet head slowly and safely by hand (clockwise twist of the fingers with little pressure).
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.