Lightweight, quick-detach mount lets you install and remove your Aimpoint Micro series red dot in seconds. Replaces original factory base and secures to the Aimpoint sight with four, high-strength, steel Torx® screws for a tight hold under heavy recoil. Mounts T-1 red dot at lowest height.
SPECS: 6061 T6 aluminum, hardcoat T3 mil-spec anodized, matte black. Height measured from top of rail to bottom of scope body - .31” (7.8mm). Fits Aimpoint Micro series red dot sights only.
Más...
Montura Robusta
Montura ligera y de desmontaje rápido que te permite instalar y quitar tu visor de punto rojo de la serie Aimpoint Micro en segundos. Reemplaza la base original de fábrica y se asegura al visor Aimpoint con cuatro tornillos Torx® de acero de alta resistencia para un agarre firme bajo fuerte retroceso. Monta el punto rojo T-1 a la altura más baja.
ESPECIFICACIONES: Aluminio 6061 T6, anodizado duro T3 mil-spec, negro mate. Altura medida desde la parte superior del riel hasta la parte inferior del cuerpo del visor - .31” (7.8mm). Compatible únicamente con visores de punto rojo de la serie Aimpoint Micro.
Más...
Evaluaciones de clientes para AMERICAN DEFENSE MANUFACTURING AIMPOINT MICRO T1/T2 LOW MOUNT STANDARD LEVER BLACK
Número de evaluaciones: 4
De brownells.com: 4
Evaluación media: 4,5
works great with Sig Romeo5(05/11/2017)
Works well in conjunction with a fixed front sight post and allows a less obstructed view. Is secure and comes off quickly and does not add much weight. About 7.5 oz for the sight and base.
Great mount(09/01/2016)
I purchased this for my Aimpoint H1 and I am more than pleased with it. Sturdy mount, easy to install, and takes a beating in training. Highly recommend.
solid mount(30/08/2011)
I've used a couple of these mounts, the AD-T1-10 provides an absolute cowitness with flattop AR's. Overall I'm happy with these, they are solid and lock up tight, a good value for the money. This particular model is the low model for using on shotguns, pistols, etc. [...] I was going to go with a larue, but the I beam design they use on their absolute cowitness model looks flimsy to me.
mounted on AK(21/11/2015)
I used this to mount an Aimpoint T1 on my Maadi AK. When attached to the Ultimak gas tube I cannot see the enough of the iron sights to use them effectively - my reason for 4 stars. Otherwise, the mount is sturdy, easy to remove and it's American made.
N.º de producto: 100004024 AMERICAN DEFENSE MANUFACTURING AIMPOINT MICRO T1/T2 LOW MOUNT STANDARD LEVER BLACK Ref Fabricante: ADT1LSTD818503010385 Montura ligera y de desmontaje rápido que te permite instalar y quitar tu visor de punto rojo de la serie Aimpoint Micro en segundos. Reemplaza la base original de fábrica y se asegura al visor Aimpoint con cuatro tornillos Torx® de acero de alta resistencia para un agarre firme bajo fuerte retroceso. Monta el punto rojo T-1 a la altura más baja.
99.9EUR599,90 €
*179,90 € Solo 1 unidades disponibles a este precio
Plazo de entrega de aproximadamente 2-4 días. 1 pcs. en el almacén local 5 pcs. en el almacén de EE.UU.
Color:
Matte Black
Estilo:
Tactical Bases
Hacer:
Universal Rifles
Material:
Aluminio
Numero de bases:
1-Piece
Peso de entrega: 0,068kgAltura de envío: 58mmAncho de envío: 58mmLongitud de envío: 117mm
Lightweight, quick-detach mount lets you install and remove your Aimpoint Micro series red dot in seconds. Replaces original factory base and secures to the Aimpoint sight with four, high-strength, steel Torx® screws for a tight hold under heavy recoil. Mounts T-1 red dot at lowest height.
SPECS: 6061 T6 aluminum, hardcoat T3 mil-spec anodized, matte black. Height measured from top of rail to bottom of scope body - .31” (7.8mm). Fits Aimpoint Micro series red dot sights only.
Más...
Montura Robusta
Montura ligera y de desmontaje rápido que te permite instalar y quitar tu visor de punto rojo de la serie Aimpoint Micro en segundos. Reemplaza la base original de fábrica y se asegura al visor Aimpoint con cuatro tornillos Torx® de acero de alta resistencia para un agarre firme bajo fuerte retroceso. Monta el punto rojo T-1 a la altura más baja.
ESPECIFICACIONES: Aluminio 6061 T6, anodizado duro T3 mil-spec, negro mate. Altura medida desde la parte superior del riel hasta la parte inferior del cuerpo del visor - .31” (7.8mm). Compatible únicamente con visores de punto rojo de la serie Aimpoint Micro.
Más...
Evaluaciones de clientes para AMERICAN DEFENSE MANUFACTURING AIMPOINT MICRO T1/T2 LOW MOUNT STANDARD LEVER BLACK
Número de evaluaciones: 4
De brownells.com: 4
Evaluación media: 4,5
works great with Sig Romeo5(05/11/2017)
Works well in conjunction with a fixed front sight post and allows a less obstructed view. Is secure and comes off quickly and does not add much weight. About 7.5 oz for the sight and base.
Great mount(09/01/2016)
I purchased this for my Aimpoint H1 and I am more than pleased with it. Sturdy mount, easy to install, and takes a beating in training. Highly recommend.
solid mount(30/08/2011)
I've used a couple of these mounts, the AD-T1-10 provides an absolute cowitness with flattop AR's. Overall I'm happy with these, they are solid and lock up tight, a good value for the money. This particular model is the low model for using on shotguns, pistols, etc. [...] I was going to go with a larue, but the I beam design they use on their absolute cowitness model looks flimsy to me.
mounted on AK(21/11/2015)
I used this to mount an Aimpoint T1 on my Maadi AK. When attached to the Ultimak gas tube I cannot see the enough of the iron sights to use them effectively - my reason for 4 stars. Otherwise, the mount is sturdy, easy to remove and it's American made.
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.