Improves Your Hold On A Troy Modular Railed Handguard
Heat-resistant rubber rail covers quickly snap into the circular cooling holes on Troy modular rail-and-chassis systems to provide you with a extra-comfortable, greatly improved grip while keeping added bulk to an absolute minimum. Each cover fills 6 holes and may be cut down to shorter lengths or installed end-to-end for longer lengths.
SPECS: Heat-resistant rubber, black. One strip measures 4.5" (11.4cm) long. Fits Troy TRX-Extreme, Alpha, and Delta rails. 7 strips per pak.
Más...
Mejora Tu Agarre En Una Guardamanos Con Rieles Modulares Troy
Las cubiertas de goma resistentes al calor se encajan rápidamente en los orificios circulares de los sistemas modulares de riel y chasis de Troy, brindándote un agarre extremadamente cómodo y significativamente mejorado, mientras mantienen el volumen añadido al mínimo absoluto. Cada cubierta llena 6 orificios y puede ser cortada a longitudes menores o instalada de extremo a extremo para longitudes mayores.
ESPECIFICACIONES: Goma resistente al calor, color negro. Una tira mide 4.5" (11.4cm) de largo. Compatible con las guías Troy TRX-Extreme, Alpha y Delta. 7 tiras por paquete.
Más...
Evaluaciones de clientes para TROY INDUSTRIES SQUID GRIP ALPHA & DELTA RAIL COVER RUBBER BLACK 4.5"
Número de evaluaciones: 2
De brownells.com: 2
Evaluación media: 5
Accomplished What I Was Looking For(15/03/2013)
These were still a fairly new and little reviewed product at the time I ordered them. I ordered two (2) sets to fully cover my older model Troy TRX 11" free floating hand guard. Some cutting and trimming was necessary only because I also have a grip pod and QD sling mounted on the rail. This was easily done with toenail clippers - which I highly recommend. Installation was pretty easy, and the grips are easily removable, but they seem to stay in place during normal use without any issues. These don't seem to thicken the feel of the Troy hand guard by too much, but do add a bit of extra grip that at the same time doesn't prevent your hand from freely sliding up and down the length of the hand guard when necessary. These also provide some ding and scratch damage protection for your Troy TRX hand guard, which is one of the main reasons I got these in the first place. Buying two (2) sets of these was a bit pricey for what they are, especially combined with the Brownells S&H fees that are a bit high for small purchases. You probably will only really need one set of these, but I personally prefer how the Troy TRX free floating hand guard looks when completely covered in squid grips.
Functional and looks good too(07/01/2014)
This grip enhancement is great. I intalled these on my Troy Alpha Battle Rail with no problem. They have a great feel to my bare hand and look really cool on my weapon. I'm sure they would perform better with gloves. I have cycled about 300 rounds through my rifle and have not had any issues with heat.
N.º de producto: 100010793 TROY INDUSTRIES SQUID GRIP ALPHA & DELTA RAIL COVER RUBBER BLACK 4.5" Ref Fabricante: SSQD7PK00BT00812699017098 Las cubiertas de goma resistentes al calor se encajan rápidamente en los orificios circulares de los sistemas modulares de riel y chasis de Troy, brindándote un agarre extremadamente cómodo y significativamente mejorado, mientras mantienen el volumen añadido al mínimo absoluto. Cada cubierta llena 6 orificios y puede ser cortada a longitudes menores o instalada de extremo a extremo para longitudes mayores.
47.9EUR047,90 €
*
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Color:
Black
Estilo:
Accessories
Hacer:
AR-15
Longitud:
4.5 in
Material:
Rubber
Peso de entrega: 0,045kgAltura de envío: 10mmAncho de envío: 168mmLongitud de envío: 244mm
Improves Your Hold On A Troy Modular Railed Handguard
Heat-resistant rubber rail covers quickly snap into the circular cooling holes on Troy modular rail-and-chassis systems to provide you with a extra-comfortable, greatly improved grip while keeping added bulk to an absolute minimum. Each cover fills 6 holes and may be cut down to shorter lengths or installed end-to-end for longer lengths.
SPECS: Heat-resistant rubber, black. One strip measures 4.5" (11.4cm) long. Fits Troy TRX-Extreme, Alpha, and Delta rails. 7 strips per pak.
Más...
Mejora Tu Agarre En Una Guardamanos Con Rieles Modulares Troy
Las cubiertas de goma resistentes al calor se encajan rápidamente en los orificios circulares de los sistemas modulares de riel y chasis de Troy, brindándote un agarre extremadamente cómodo y significativamente mejorado, mientras mantienen el volumen añadido al mínimo absoluto. Cada cubierta llena 6 orificios y puede ser cortada a longitudes menores o instalada de extremo a extremo para longitudes mayores.
ESPECIFICACIONES: Goma resistente al calor, color negro. Una tira mide 4.5" (11.4cm) de largo. Compatible con las guías Troy TRX-Extreme, Alpha y Delta. 7 tiras por paquete.
Más...
Evaluaciones de clientes para TROY INDUSTRIES SQUID GRIP ALPHA & DELTA RAIL COVER RUBBER BLACK 4.5"
Número de evaluaciones: 2
De brownells.com: 2
Evaluación media: 5
Accomplished What I Was Looking For(15/03/2013)
These were still a fairly new and little reviewed product at the time I ordered them. I ordered two (2) sets to fully cover my older model Troy TRX 11" free floating hand guard. Some cutting and trimming was necessary only because I also have a grip pod and QD sling mounted on the rail. This was easily done with toenail clippers - which I highly recommend. Installation was pretty easy, and the grips are easily removable, but they seem to stay in place during normal use without any issues. These don't seem to thicken the feel of the Troy hand guard by too much, but do add a bit of extra grip that at the same time doesn't prevent your hand from freely sliding up and down the length of the hand guard when necessary. These also provide some ding and scratch damage protection for your Troy TRX hand guard, which is one of the main reasons I got these in the first place. Buying two (2) sets of these was a bit pricey for what they are, especially combined with the Brownells S&H fees that are a bit high for small purchases. You probably will only really need one set of these, but I personally prefer how the Troy TRX free floating hand guard looks when completely covered in squid grips.
Functional and looks good too(07/01/2014)
This grip enhancement is great. I intalled these on my Troy Alpha Battle Rail with no problem. They have a great feel to my bare hand and look really cool on my weapon. I'm sure they would perform better with gloves. I have cycled about 300 rounds through my rifle and have not had any issues with heat.
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.