Brownells Iberica - El mayor proveedor de accesorios para el Tiro, Piezas y herramientas del armero. España

BERGER BULLETS
6.5MM (0.264") HYBRID BOAT TAIL BULLETS

679459264143 749013736
Bergers Hybrid design blends the best of both worlds by incorporating two different shapes within the nose. As the bearing surface ends, a tangent ogive begins. This tangent section of the ogive results in the bullet being much less sensitive to seating depth. As you move forward along the tangent portion, the shape changes into a secant ogive (the shape used on the VLD bullets). This shape is very efficient in the wind and is why the VLD became so popular. The key to all this is not just the combining of these two shapes but also the partnership between the ballistician and the bullet maker. Berger’s Chief Ballistician, Bryan Litz uses his expertise to combine the appropriate shapes for optimum performance.
104.9 459.9 2 EUR
New
N.º de producto: 749013736
BERGER BULLETS 6.5MM (0.264") 140GR HYBRID BOAT TAIL 100/BOX
Ref Fabricante: 26414 679459264143 El diseño híbrido de Berger combina lo mejor de dos mundos al incorporar dos formas diferentes en la punta del proyectil. A medida que termina la superficie de apoyo, comienza un ogival tangencial. Esta sección tangencial del ogival hace que el proyectil sea mucho menos sensible a la profundidad de asentamiento. A medida que avanzas a lo largo de la parte tangencial, la forma cambia a un ogival secante (la forma utilizada en las balas VLD). Esta forma es muy eficiente contra el viento y es la razón por la que las VLD se hicieron tan populares. La clave de todo esto no es solo la combinación de estas dos formas, sino también la colaboración entre el balístico y el fabricante de balas. El Jefe de Balística de Berger, Bryan Litz, utiliza su experiencia para combinar las formas apropiadas para un rendimiento óptimo.
104.9 EUR 0 104,90 € *
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Caracteristicas: Ballistic Coefficient (G1): 0.607 Ballistic Coefficient (G7): 0.311 Calibre: 6.5mm, 264 Caliber Diameter (Breech): 0.264 Diametro (in): 0.264 Estilo de la marca: Hybrid Target Grain: 140 Sectional Density: 0.287 Tipo de Proyectil: Hybrid Boat Tail Cantidad: 100

Atributos

Ballistic Coefficient (G1): 0.607 Ballistic Coefficient (G7): 0.311 Calibre: 6.5mm,264 Caliber Diameter (Breech): 0.264 Diametro (in): 0.264 Estilo de la marca: Hybrid Target Grain: 140 Sectional Density: 0.287 Tipo de Proyectil: Hybrid Boat Tail Cantidad: 100 Peso de entrega: 1,111kg Altura de envío: 56mm Ancho de envío: 69mm Longitud de envío: 107mm

Detalles del artículo

Hecho en USA
Clasificación de exportación de EE. UU.: 0A505.x



New
N.º de producto: 749013965
BERGER BULLETS 6.5MM (0.264") 140GR HYBRID BOAT TAIL 500/BOX
Ref Fabricante: 26714 679459267144 El diseño híbrido de Berger combina lo mejor de dos mundos al incorporar dos formas diferentes en la punta del proyectil. A medida que termina la superficie de apoyo, comienza un ogival tangencial. Esta sección tangencial del ogival hace que el proyectil sea mucho menos sensible a la profundidad de asentamiento. A medida que avanzas a lo largo de la parte tangencial, la forma cambia a un ogival secante (la forma utilizada en las balas VLD). Esta forma es muy eficiente contra el viento y es la razón por la que las VLD se hicieron tan populares. La clave de todo esto no es solo la combinación de estas dos formas, sino también la colaboración entre el balístico y el fabricante de balas. El Jefe de Balística de Berger, Bryan Litz, utiliza su experiencia para combinar las formas apropiadas para un rendimiento óptimo.
459.9 EUR 0 459,90 € *
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Caracteristicas: Ballistic Coefficient (G1): 0.607 Ballistic Coefficient (G7): 0.311 Calibre: 6.5mm, 264 Caliber Diameter (Breech): 0.264 Diametro (in): 0.264 Estilo de la marca: Hybrid Grain: 140 Sectional Density: 0.287 Tipo de Proyectil: Boat Tail Hollow Point (BTHP) Cantidad: 500
Bergers Hybrid design blends the best of both worlds by incorporating two different shapes within the nose. As the bearing surface ends, a tangent ogive begins. This tangent section of the ogive results in the bullet being much less sensitive to seating depth. As you move forward along the tangent portion, the shape changes into a secant ogive (the shape used on the VLD bullets). This shape is very efficient in the wind and is why the VLD became so popular. The key to all this is not just the combining of these two shapes but also the partnership between the ballistician and the bullet maker. Berger’s Chief Ballistician, Bryan Litz uses his expertise to combine the appropriate shapes for optimum performance.
Newsletters