Brownells Iberica - El mayor proveedor de accesorios para el Tiro, Piezas y herramientas del armero. España
050806102934 080016000
Quickly Aligns & Positively Holds Bolts And Knobs For Welding
Any gunsmith who has ever fiddled, fussed and fumed as he tried to align a bolt knob with the cut-off stub of a military bolt handle while altering the bolt for scope mounting, will love this jig. As the illustration shows, the jig makes it possible to lock both knob and bolt in precisely the desired relationship and hold them firmly, while leaving adequate space to weld by either the acetylene or arc methods. Getting the knob and bolt into alignment used to be a real chore and, without the jig to hold it all together, one incautious movement could upset the alignment, leaving the work to be done all over again. The jig employs a different approach to aligning the handle to the bolt by using a protractor supplied with the jig kit. Full and completely illustrated instructions are supplied with each jig set. They assure an accurate setup. The Brownell Bolt Welding Jig will pay for itself many times over during the course of the years - not only in time but in saved dispositions! Further, it makes it possible for the man who does not have welding facilities in his shop to get the bolt all ready to weld, and then take it to a professional welding shop for the final work. If you have ever tried to explain to a non-gun-loving welder how you wanted the job done and then stood there and watched him "botch it up", the great value of the JIG to you is even more apparent!!
SPECS: "V" clamps are 2-3/8" (8.6cm) long x 5/8" (15.9mm) wide x 1¼" (3.2cm) high with 1" (2.5cm) clamp opening. One leg is 4" (10.2cm) long and the other is 5" (15.2cm).
89.9 89.9 1 EUR
Sale
N.º de producto: 080016000
BROWNELLS BOLT WELDING JIG PLUS PROTRACTOR & INSTRUCTIONS 050806102934 Cualquier armero que alguna vez ha amañado, hablaba y se enfureció cuando él trató de alinear un mando de perno con el resguardo del corte de una maneta militar mientras alterando el perno de montaje de alcance, les encantará esta plantilla. Como se muestra en la Ilustración, la plantilla permite bloquear ambas perilla y perno en precisamente la relación deseada y mantenerlos firmemente, dejando un espacio adecuado para soldar mediante métodos el acetileno o el arco. Consiguiendo la perilla y el perno en la alineación solían ser una tarea real y, sin la plantilla para mantenerla unida, un movimiento imprudente puede cambiar la alineación, dejando el trabajo a hacer todo de nuevo. La plantilla emplea un enfoque diferente para alinear la manija al perno utilizando un transportador suministrado con el kit de plantilla. Instrucciones completa y totalmente ilustradas se suministran con cada conjunto de plantilla. Aseguran una correcta instalación. La plantilla de soldadura de perno Brownell pagará por sí mismo muchas veces durante el transcurso de los años - no sólo en tiempo sino en disposiciones guardadas! Además, se hace posible para el hombre que no tiene instalaciones en su tienda para llevarle el rayo todos listos para soldar y luego llevarlo a un profesional de compras para el trabajo final de soldadura la soldadura. Si alguna vez han tratado de explicar a un soldador no-amante de las armas como quería el trabajo hecho y luego se quedó allí y le vi "estropearlo", el gran valor de la plantilla que es incluso más evidente!!!
89.9 EUR 0 89,90 € * 94,17 €
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Caracteristicas: Hacer: Universal Rifles

Atributos

Hacer: Universal Rifles Peso de entrega: 0,408kg Altura: 46mm Anchura: 124mm Longitud: 226mm

Detalles del artículo

Hecho en USA




Quickly Aligns & Positively Holds Bolts And Knobs For Welding
Any gunsmith who has ever fiddled, fussed and fumed as he tried to align a bolt knob with the cut-off stub of a military bolt handle while altering the bolt for scope mounting, will love this jig. As the illustration shows, the jig makes it possible to lock both knob and bolt in precisely the desired relationship and hold them firmly, while leaving adequate space to weld by either the acetylene or arc methods. Getting the knob and bolt into alignment used to be a real chore and, without the jig to hold it all together, one incautious movement could upset the alignment, leaving the work to be done all over again. The jig employs a different approach to aligning the handle to the bolt by using a protractor supplied with the jig kit. Full and completely illustrated instructions are supplied with each jig set. They assure an accurate setup. The Brownell Bolt Welding Jig will pay for itself many times over during the course of the years - not only in time but in saved dispositions! Further, it makes it possible for the man who does not have welding facilities in his shop to get the bolt all ready to weld, and then take it to a professional welding shop for the final work. If you have ever tried to explain to a non-gun-loving welder how you wanted the job done and then stood there and watched him "botch it up", the great value of the JIG to you is even more apparent!!
SPECS: "V" clamps are 2-3/8" (8.6cm) long x 5/8" (15.9mm) wide x 1¼" (3.2cm) high with 1" (2.5cm) clamp opening. One leg is 4" (10.2cm) long and the other is 5" (15.2cm).
Reordenado Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
134,90 € * 19,90 € - 134,90 €*
(Seleccione los artículos en venta!)
Precio anterior 146,12 €
Reordenado Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
44,90 € *
En stock Plazo de entrega de aproximadamente 14-21 días.
1 pcs. en el almacén de EE.UU.
59,90 € * 59,90 € - 64,90 €*
Newsletters