Su cesta está vacía.

Cesta

926-532900

Suscribirse al boletín

BROWNELLS
CAN'T MAR™ 1911 AUTO BUSHING WRENCH

050806102200 080045045

Can't Damage Finishes-Virtually Unbreakable- Pocket Sized-Versatile, Double-Ended Design

Every 1911 owner and gun shop needs a wrench to remove the barrel bushing from the 1911 Autos. Ours fits all the calibers and variations; Colt-made (including factory Officers ACP), plus copies. Made from super tough ABS "T" grade polymers, Brownells Can't Mar™ wrench has more thickness and heft than other synthetic wrenches. It gets out even the most tightly fitted, match-grade bushing WITHOUT scarring or marring the finish of the gun's bushing or slide. Virtually unbreakable, the Can't Mar™ wrench carries easily in pocket or field kit.

SPECS: 5½" (14.0cm) long. 1¼" (3.2cm) wide. .187" (4.75mm) thick. Weighs 1 oz. (28.3gm).

Más...

No puede dañar acabados-virtualmente irrompible de bolsillo tamaño versátil, doble diseño

Cada dueño de 1911 y armería necesita una llave para quitar el buje barril de los Autos de 1911. Nuestro adapta a todos los calibres y variaciones; Colt-hizo (incluyendo la fábrica ACP oficiales), además de copias. Hecha de polímeros de grado super resistentes ABS "T", Brownells no Mar ™ llave tiene más espesor y peso que otras llaves sintéticas. Hace ni siquiera el más firmemente ajustado, partido-grade buje sin cicatrices o estropear el acabado del buje de la pistola o de la diapositiva. Virtualmente irrompible, el no Mar ™ llave lleva fácilmente en el bolsillo o en el campo de juego.

Especificaciones: 5½"(22.5 cm) largo 1¼" (3,2 cm) de ancho. . 187"(4,75 mm) espesor. Pesa 1 onza (45.5 gm).

Más...

Evaluaciones de clientes para BROWNELLS CAN'T MAR 1911 AUTO BUSHING WRENCH

Número de evaluaciones: 14
De brownells.com: 14
Evaluación media: 3

Worked once....almost (22/08/2009)

I bought one of these for my Colt Officers ACP. The wrench plastic just deformed on the first use, didn't remove the bushing, and was useless from then on. The bushing is fairly snug on my .45 so maybe that's why it didn't work. Good idea but did not work for me. A waste of my [$] and not worth the cost of returning.

Disappointed.... (14/10/2009)

It worked splendidly a handful of times. After a couple of uses it starts to get seriously chewed up and malformed, leaving bits of orange plastic all down in the guide rod area of the gun. After about 10 uses it was so chewed up it would not successfully break down the gun.

Good tool at a fair price (01/11/2009)

I like this plastic tool better than the Brownells steel Colt wrench because it is light and scratch proof. It does mar slightly because it is plastic. Unless you have super tight bushings, it works perfectly. If you have super tight bushings, you may need the aluminum bushing wrench.

Works Great, Will Not Damage Gun (24/04/2010)

Works great, will not mar finish and holds up Great. have used one in my shop for years and have taken down 100's of 1911's with it, from time to time I have run across a gun with a spring cap, bushing or a slide that has a bur and it can leave a mark on it but that is not the fault of the tool. and if the tool where to brake they are so inexpensive that I would not hesitate to purchase a replacement.

Great Finish Saver (16/08/2010)

This bushing wrench is a real finish saver.. after struggling with an SA Pro bushing, can't imagine what damage may have resulted without it. Although it does shed a little plastic and seems somewhat consumable.. it's well worth every penny compared to refinishing.

It works but has limits (10/10/2010)

The good thing about this plastic wrench is that it doesn't mar the finish, and of course, you probably won't misplace it.

If you have a tight, accurized bushing, as I do, it won't last more than a few times before it gets chewed up. But for the price, buy a few of them.

Doesn't mar your pistols. (09/04/2011)

This tool does what it says but is a little on the soft side for tight bushings. I tore mine up pretty good when fitting a Wilson Combat bushing into my wife's Colt Officers model 1911. The wilson bushing is very tight fitting(good, good,good) after fitting for accuracy. I've recently up graded to the aluminum version.

Good Bushing Wrench and will not damage! (26/03/2012)

It is a very good Bushing Wrench, as it will not mark up your 1911. I would strongly reccomend the purchasing of a few of them for working on or cleaning your 1911.

Save your money, do not buy this wrench (06/09/2012)

I purchased 2 wrenches but found the tolerances are sloppy for a standard 1911 A1 recoil bushing. Trying to make it fit caused the wrench to slip and the recoil spring plug to go flying off the workbench. Cost to replace the plug plus freight about $16. Recommend to step up to the metal wrench.

Good For The Price (06/05/2013)

Does what it says and doesn't mar the finish on the gun. Only drawback is the plastic is a bit on the soft side so it wears out pretty quick. Works great but wish it would last a bit longer.

Great tool (06/07/2013)

Fits both style of bushings. Can easily be reshaped for a custom bushing. Light weight, Strong. Mine has lasted for years. buying a new one cause the old one is among the missing!!!!

Too soft of material (13/09/2014)

Wears out very fast if you have a tight fitting bushing, this won't last long at all. Material is very soft and won't mar the gun but won't last long at all. On the first use, lots of mat'l chipped away from the tool. I imagine after about three uses it would be junk.

Also, so soft that it flexes so much that you can hardly hold the spring plug down enough to turn the bushing enough to lock back in place but it doesn't scratch your weapon at all.

I have now got the brownells enhanced bushing wrench with the flange that retains the recoil spring plug as you twist the bushing free, Great tool and won't scratch your weapon as it is made of aluminum. Well worth the extra money, remember you get what you pay for.

Should have gotten one sooner (06/09/2016)

Great piece of gear to use so as to not scratch up the end of the slide

Doesn't fit (10/12/2017)

The openings are too small (short) to fit my Springfield Armory Inc. target model. Also, to material is too soft, it peels off if I force it onto the bushing. Not worth the money.

Leer 14 mas calificaciones en brownells.com

14.9 14.9 1 EUR

N.º de producto: 080045045
BROWNELLS CAN'T MAR 1911 AUTO BUSHING WRENCH
Ref Fabricante: 080045045 050806102200 Cada dueño de 1911 y armería necesita una llave para quitar el buje barril de los Autos de 1911. Nuestro adapta a todos los calibres y variaciones; Colt-hizo (incluyendo la fábrica ACP oficiales), además de copias. Hecha de polímeros de grado super resistentes ABS "T", Brownells no Mar ™ llave tiene más espesor y peso que otras llaves sintéticas. Hace ni siquiera el más firmemente ajustado, partido-grade buje sin cicatrices o estropear el acabado del buje de la pistola o de la diapositiva. Virtualmente irrompible, el no Mar ™ llave lleva fácilmente en el bolsillo o en el campo de juego.

14.9 EUR 1.268 14,90 € *

Plazo de entrega de aproximadamente 14-21 días.
Más de 10 pcs. en almacén de EE.UU.

Caracteristicas: Hacer: 1911 Modelo: Government, Commander, Officers

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Atributos

Hacer: 1911 Modelo: Commander,Government,Officers Peso de entrega: 0,023kg Altura: 13mm Anchura: 79mm Longitud: 150mm

Detalles del artículo

Hecho en USA

Can't Damage Finishes-Virtually Unbreakable- Pocket Sized-Versatile, Double-Ended Design

SPECS: 5½" (14.0cm) long. 1¼" (3.2cm) wide. .187" (4.75mm) thick. Weighs 1 oz. (28.3gm).

Más...

No puede dañar acabados-virtualmente irrompible de bolsillo tamaño versátil, doble diseño

Especificaciones: 5½"(22.5 cm) largo 1¼" (3,2 cm) de ancho. . 187"(4,75 mm) espesor. Pesa 1 onza (45.5 gm).

Más...

Evaluaciones de clientes para BROWNELLS CAN'T MAR 1911 AUTO BUSHING WRENCH

Número de evaluaciones: 14
De brownells.com: 14
Evaluación media: 3

Worked once....almost (22/08/2009)

Disappointed.... (14/10/2009)

Good tool at a fair price (01/11/2009)

Works Great, Will Not Damage Gun (24/04/2010)

Great Finish Saver (16/08/2010)

It works but has limits (10/10/2010)

Doesn't mar your pistols. (09/04/2011)

Good Bushing Wrench and will not damage! (26/03/2012)

It is a very good Bushing Wrench, as it will not mark up your 1911. I would strongly reccomend the purchasing of a few of them for working on or cleaning your 1911.

Save your money, do not buy this wrench (06/09/2012)

Good For The Price (06/05/2013)

Does what it says and doesn't mar the finish on the gun. Only drawback is the plastic is a bit on the soft side so it wears out pretty quick. Works great but wish it would last a bit longer.

Great tool (06/07/2013)

Fits both style of bushings. Can easily be reshaped for a custom bushing. Light weight, Strong. Mine has lasted for years. buying a new one cause the old one is among the missing!!!!

Too soft of material (13/09/2014)

Should have gotten one sooner (06/09/2016)

Great piece of gear to use so as to not scratch up the end of the slide

Doesn't fit (10/12/2017)

The openings are too small (short) to fit my Springfield Armory Inc. target model. Also, to material is too soft, it peels off if I force it onto the bushing. Not worth the money.

Leer 14 mas calificaciones en brownells.com

Los clientes compraron
Alternativas

Sale

WOLFF 7 LB. SPRING
TYPE A RECOIL SPRING FOR TARGET (SOFTBALL) LOADS

WOLFF

Reordenado Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.

14,90 € * 9,90 € - 37,90 €*

(Seleccione los artículos en venta!)

Precio anterior 19,97 €

Recoil Springs

Sale

Cylinder & Slide 1911 LIGHT PULL SEAR SPRING
1911 LIGHT PULL SEAR SPRING

Cylinder & Slide

En stock Plazo de entrega de aproximadamente 14-21 días.
Más de 10 pcs. en almacén de EE.UU.

17,90 € *

Precio anterior 19,58 €

Sear Springs

4,6

Sale

ISMI 22 LB. 1911 S/S SPRING, EACH
1911 MAINSPRING

ISMI

En stock Plazo de entrega de aproximadamente 14-21 días.
8 pcs. en el almacén de EE.UU.

13,90 € * 13,90 € - 39,90 €*

(Seleccione los artículos en venta!)

Precio anterior 15,83 €

Mainsprings

MTM Case-Gard FLIP TOP PISTOL AMMO BOX 9MM-380 ACP 100 ROUND RED
FLIP TOP PISTOL AMMO BOXES

MTM Case-Gard

En stock Plazo de entrega de aproximadamente 14-21 días.
Más de 10 pcs. en almacén de EE.UU.

9,90 € * 9,90 € - 12,90 €*

Cajas de municion arma larga

BROWNELLS 1911 LUG CUTTER HANDLE ONLY
1911 LUG FITTING KIT

BROWNELLS

En stock Plazo de entrega de aproximadamente 14-21 días.
Más de 10 pcs. en almacén de EE.UU.

46,90 € * 29,90 € - 234,90 €*

Barrel Lug Tools | Barrel Fitting Tools

4,7

Identificarse

¿Ha olvidado su contraseña?
Registrarse

Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.

Redes Sociales

Navegacion

Categorias

Ordering

Servicio al cliente

¡Bienvenido!

Bienvenido a Brownells, la principal Armeria de accesorios de armas de fuego, piezas de armas y herramientas para armeros en España. En nuestra web podrá encontrar todo tipo de accesorios y repuestos para sus rifles, carabinas, escopetas o armas cortas. Si le gusta la caza o el tiro de precisión esta es su web.

La promesa de Brownells España

La promesa Brownells para nuestros clientes: TU SATISFACIÓN ESTÁ GARANTIZADA. Si por cualquier motivo no estás 100% satisfecho con cualquiera de los productos comprados a nosotros, se lo devolvemos o cambiamos.

Nuestra oferta

Si te gusta disparar, trabajar con armas como negocio o hobby, o simplemente poseer un arma, este es tu lugar. Durante más de 75 años, tiradores, armeros profesionales, aficionados, cuerpos de defensa y especialistas en armas han venido a Brownells.es por la alta calidad en sus piezas de armas y en los repuestos que ellos necesitan.

Encontrarás más de 90,000 incluyendo exclusivas piezas de armas, accesorios, herramientas para armeros, munición y otros productos para el manteniminto, reparación y mejora de tus pistolas.

Su equipo Brownells España

Armeria A. Izquierdo (B-13309356)