38,000 PSI;Flows At 650\ F. Highest Silver-Bearing Content Available In A Non-Zinc Solder
Higher tensile strength for a stronger bond on joints that are subject to a high degree of stress or vibration. Contains 95% Cadmium and 5% Silver that flows free at 640° to 650° F. (maximum temp. 740° F.). Bonds quickly to all types of steel including stainless steel. Not affected by hot, caustic bluing solutions or by baking after spray-finish applications. Use with Copper Bond Flux and adequate ventilation.
SPECS: Wire - 1/16" (1.6mm) diameter.
Más...
38.000 PSI;Flujos de 650\ f el. Más alto contenido de plata-cojinete disponible en un no-cinc de la soldadura
Fuerza extensible más alta para un vínculo más fuerte en las articulaciones que están sujetas a un alto grado de estrés o vibración. Contiene un 95% del cadmio y 5% de plata que fluye libre en 640° a 650° F. (Temp máximo 740° F.). Bonos rápidamente a todos los tipos de acero inoxidable incluidos. No afectado por soluciones azulado calientes, cáusticos o en el horno después de aplicaciones de rociado de acabado. Úselo con cobre Bond flujo y una ventilación adecuada.
Especificaciones: - 1/16"(1,6 mm) diámetro.
Más...
Evaluaciones de clientes para BROWNELLS HIGH TEMP HI-FORCE 44 SOLDER 1/4LB WIRE
Número de evaluaciones: 2
De brownells.com: 2
Evaluación media: 1
Can anyone get this to work?(18/05/2011)
I've used Force 44 for many years. And I also use higher temp silver solders. But for the life of me, I can't get this stuff to adhere to anything, especially stainlesses. And the Copper Bond Flux is being used. Originally it was purchased to reattach a shotgun rib. This is a tedious process (for me) anyway. I thought the complications of that job were the problem. But since, I've tried a dozen times to attach sight ramps and such with it, and always remove all and start over with a solder that works for me. If anyone gets it to work, I'm missing something not in the instructions.
Not for stainless(23/07/2012)
I tried to use this to install a front sight onto a stainless steel Ruger Blackhawk. I've been soldering, brazing, and welding since I was a teenager (a very long time ago). If your working on stainless, this is NOT for you.
N.º de producto: 080649525 BROWNELLS HIGH TEMP HI-FORCE 44 SOLDER 1/4LB WIRE Fuerza extensible más alta para un vínculo más fuerte en las articulaciones que están sujetas a un alto grado de estrés o vibración. Contiene un 95% del cadmio y 5% de plata que fluye libre en 640° a 650° F. (Temp máximo 740° F.). Bonos rápidamente a todos los tipos de acero inoxidable incluidos. No afectado por soluciones azulado calientes, cáusticos o en el horno después de aplicaciones de rociado de acabado. Úselo con cobre Bond flujo y una ventilación adecuada.
Peso:
1/4 lb.
Peso de entrega: 0,113kgAltura: 20mmAnchura: 94mmLongitud: 168mm
Detalles del artículo
Hecho en USA
Sale
N.º de producto: 080649501 BROWNELLS HIGH TEMP HI-FORCE 44 SOLDER 1OZ WIRE Fuerza extensible más alta para un vínculo más fuerte en las articulaciones que están sujetas a un alto grado de estrés o vibración. Contiene un 95% del cadmio y 5% de plata que fluye libre en 640° a 650° F. (Temp máximo 740° F.). Bonos rápidamente a todos los tipos de acero inoxidable incluidos. No afectado por soluciones azulado calientes, cáusticos o en el horno después de aplicaciones de rociado de acabado. Úselo con cobre Bond flujo y una ventilación adecuada.
Peso:
1.0 oz
Peso de entrega: 0,023kgAltura: 8mmAnchura: 104mmLongitud: 175mm
Detalles del artículo
Hecho en USA
Sale
N.º de producto: 080649590 BROWNELLS HIGH TEMP HI-FORCE 44 SOLDER 1LB WIRE Fuerza extensible más alta para un vínculo más fuerte en las articulaciones que están sujetas a un alto grado de estrés o vibración. Contiene un 95% del cadmio y 5% de plata que fluye libre en 640° a 650° F. (Temp máximo 740° F.). Bonos rápidamente a todos los tipos de acero inoxidable incluidos. No afectado por soluciones azulado calientes, cáusticos o en el horno después de aplicaciones de rociado de acabado. Úselo con cobre Bond flujo y una ventilación adecuada.
38,000 PSI;Flows At 650\ F. Highest Silver-Bearing Content Available In A Non-Zinc Solder
Higher tensile strength for a stronger bond on joints that are subject to a high degree of stress or vibration. Contains 95% Cadmium and 5% Silver that flows free at 640° to 650° F. (maximum temp. 740° F.). Bonds quickly to all types of steel including stainless steel. Not affected by hot, caustic bluing solutions or by baking after spray-finish applications. Use with Copper Bond Flux and adequate ventilation.
SPECS: Wire - 1/16" (1.6mm) diameter.
Más...
38.000 PSI;Flujos de 650\ f el. Más alto contenido de plata-cojinete disponible en un no-cinc de la soldadura
Fuerza extensible más alta para un vínculo más fuerte en las articulaciones que están sujetas a un alto grado de estrés o vibración. Contiene un 95% del cadmio y 5% de plata que fluye libre en 640° a 650° F. (Temp máximo 740° F.). Bonos rápidamente a todos los tipos de acero inoxidable incluidos. No afectado por soluciones azulado calientes, cáusticos o en el horno después de aplicaciones de rociado de acabado. Úselo con cobre Bond flujo y una ventilación adecuada.
Especificaciones: - 1/16"(1,6 mm) diámetro.
Más...
Evaluaciones de clientes para BROWNELLS HIGH TEMP HI-FORCE 44 SOLDER 1/4LB WIRE
Número de evaluaciones: 2
De brownells.com: 2
Evaluación media: 1
Can anyone get this to work?(18/05/2011)
I've used Force 44 for many years. And I also use higher temp silver solders. But for the life of me, I can't get this stuff to adhere to anything, especially stainlesses. And the Copper Bond Flux is being used. Originally it was purchased to reattach a shotgun rib. This is a tedious process (for me) anyway. I thought the complications of that job were the problem. But since, I've tried a dozen times to attach sight ramps and such with it, and always remove all and start over with a solder that works for me. If anyone gets it to work, I'm missing something not in the instructions.
Not for stainless(23/07/2012)
I tried to use this to install a front sight onto a stainless steel Ruger Blackhawk. I've been soldering, brazing, and welding since I was a teenager (a very long time ago). If your working on stainless, this is NOT for you.
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.