Conventional-Style Replacement Stock That Never Wears Out
There's a lot of these fine single shots that only need a replacement stock to keep 'em shooting. Indestructible polypropylene stock fits just like the factory original but include a rubber recoil pad plus sling swivel studs. Will not crack; completely unaffected by changes in humidity.
SPECS: Black polypropylene. Weighs 1 lb. 3 oz. (526g). Fits H&R/ N.E.F. 12, 20, 28, .410 gauge, and all rifles (Topper etc.)
Más...
Culata de Reemplazo de Estilo Convencional que Nunca Se Desgasta
Hay muchos de estos excelentes disparos únicos que solo necesitan una culata de reemplazo para seguir funcionando. La culata indestructible de polipropileno encaja justo como la original de fábrica pero incluye una almohadilla de retroceso de goma y puntos de anclaje para la correa. No se agrieta; completamente inafectada por cambios en la humedad.
ESPECIFICACIONES: Polipropileno negro. Pesa 1 lb. 3 oz. (526g). Compatible con H&R/ N.E.F. calibres 12, 20, 28, .410 y todos los rifles (Topper, etc.)
Más...
Evaluaciones de clientes para CHOATE H & R SYNTHETIC BUTTSTOCK
Número de evaluaciones: 6
De brownells.com: 6
Evaluación media: 3
STAY AWAY!!!(30/03/2010)
Worst stock I've ever bought. Almost impossible to attach to gun receiver. Standard size sockets will not fit inside buttstock.
H&R Synthetic Stick(17/04/2011)
Just what is says it is. Zero problem with installation proper tools are required:-) Softens kick. Lifetime stock.
NEF Stock(19/06/2011)
i bought this to replace the damaged factory wood stock on my NEF. Its proven to be OK. I haven't found a better replacement for the price. However, I wouldn't recommend it over the factory wood stock.
NOT AS SHOWN(22/12/2011)
Stock is OK, I guess, but not as shown. Sling swivels are NOT included, although they are shown in picture. I ordered by phone and the technical department told me that the swivels were one inch, so I also ordered a one inch sling. Now, I have to buy swivels separately which does not make me happy.
Choate H&R Stock(17/06/2012)
Fit well, and was a good replaced for the thumbhole factory stock. To make it easier for installing the stock, use a hacksaw to cut a slot in the head of the bolt that attaches the stock to the receiver. Then you can use a large screwdriver to tighten the bolt as a standard socket will not fit inside the stock.
410....not(30/12/2017)
Nice stock but it doesn't fit a Mossberg 410 for which it specifies.
N.º de producto: 159190108 CHOATE H & R SYNTHETIC BUTTSTOCK Ref Fabricante: CMT190108 Hay muchos de estos excelentes disparos únicos que solo necesitan una culata de reemplazo para seguir funcionando. La culata indestructible de polipropileno encaja justo como la original de fábrica pero incluye una almohadilla de retroceso de goma y puntos de anclaje para la correa. No se agrieta; completamente inafectada por cambios en la humedad.
69.9EUR469,90 €
*
Plazo de entrega de aproximadamente 14-21 días. 4 pcs. en el almacén de EE.UU.
Conventional-Style Replacement Stock That Never Wears Out
There's a lot of these fine single shots that only need a replacement stock to keep 'em shooting. Indestructible polypropylene stock fits just like the factory original but include a rubber recoil pad plus sling swivel studs. Will not crack; completely unaffected by changes in humidity.
SPECS: Black polypropylene. Weighs 1 lb. 3 oz. (526g). Fits H&R/ N.E.F. 12, 20, 28, .410 gauge, and all rifles (Topper etc.)
Más...
Culata de Reemplazo de Estilo Convencional que Nunca Se Desgasta
Hay muchos de estos excelentes disparos únicos que solo necesitan una culata de reemplazo para seguir funcionando. La culata indestructible de polipropileno encaja justo como la original de fábrica pero incluye una almohadilla de retroceso de goma y puntos de anclaje para la correa. No se agrieta; completamente inafectada por cambios en la humedad.
ESPECIFICACIONES: Polipropileno negro. Pesa 1 lb. 3 oz. (526g). Compatible con H&R/ N.E.F. calibres 12, 20, 28, .410 y todos los rifles (Topper, etc.)
Más...
Evaluaciones de clientes para CHOATE H & R SYNTHETIC BUTTSTOCK
Número de evaluaciones: 6
De brownells.com: 6
Evaluación media: 3
STAY AWAY!!!(30/03/2010)
Worst stock I've ever bought. Almost impossible to attach to gun receiver. Standard size sockets will not fit inside buttstock.
H&R Synthetic Stick(17/04/2011)
Just what is says it is. Zero problem with installation proper tools are required:-) Softens kick. Lifetime stock.
NEF Stock(19/06/2011)
i bought this to replace the damaged factory wood stock on my NEF. Its proven to be OK. I haven't found a better replacement for the price. However, I wouldn't recommend it over the factory wood stock.
NOT AS SHOWN(22/12/2011)
Stock is OK, I guess, but not as shown. Sling swivels are NOT included, although they are shown in picture. I ordered by phone and the technical department told me that the swivels were one inch, so I also ordered a one inch sling. Now, I have to buy swivels separately which does not make me happy.
Choate H&R Stock(17/06/2012)
Fit well, and was a good replaced for the thumbhole factory stock. To make it easier for installing the stock, use a hacksaw to cut a slot in the head of the bolt that attaches the stock to the receiver. Then you can use a large screwdriver to tighten the bolt as a standard socket will not fit inside the stock.
410....not(30/12/2017)
Nice stock but it doesn't fit a Mossberg 410 for which it specifies.
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.