Brownells Iberica - El mayor proveedor de accesorios para el Tiro, Piezas y herramientas del armero. España

https://www.brownells.es/Manufacturers/Magpul

TACTICOOL22 M&P 15-22 BARREL NUT WRENCH


Descripción traducida automaticaménte (Descripción - Fabricante): Las zapatas están diseñadas para ajustarse perfectamente, con el mínimo movimiento, para evitar que la tuerca está dañado. El interior de la llave cabrá sobre estándar más escondido flash A1 y A2, así como Yankee Hill y otros. Más...

The lugs are designed to fit snuggly, with minimum movement, to keep the nut from getting damaged. The inside of the wrench will fit over most standard A1 and A2 flash hiders, as well as Yankee Hill and others. The outside of the wrench fits nicely inside the stock handguard. There are two wrench flats for a 15/16 open end wrench or crows foot wrench, if you want to use a torque wrench. This is the Professional/Gunsmith version of the barrel nut wrench for the Smith & Wesson M&P 15-22. You will get many years of trouble free use from this barrel nut wrench. This wrench will fit over most standard diameter muzzle devices, such as the A2 birdcage, but the barrel nut and handguard end cap will not. Therefore, you have to remove the muzzle device to remove the barrel nut and barrel. Simple, step-by-step instructions are included. Machined from the highest quality U.S. aluminum stock available. Designed, developed, and manufactured in the USA.  
100015709
M&P 15-22 Barrel Nut Wrench
Ref Fabricante: BNW1PRO
35,88 € *

En existencias

Detalles del artículo

Hecho en USA





The lugs are designed to fit snuggly, with minimum movement, to keep the nut from getting damaged. The inside of the wrench will fit over most standard A1 and A2 flash hiders, as well as Yankee Hill and others. The outside of the wrench fits nicely inside the stock handguard. There are two wrench flats for a 15/16 open end wrench or crows foot wrench, if you want to use a torque wrench. This is the Professional/Gunsmith version of the barrel nut wrench for the Smith & Wesson M&P 15-22. You will get many years of trouble free use from this barrel nut wrench. This wrench will fit over most standard diameter muzzle devices, such as the A2 birdcage, but the barrel nut and handguard end cap will not. Therefore, you have to remove the muzzle device to remove the barrel nut and barrel. Simple, step-by-step instructions are included. Machined from the highest quality U.S. aluminum stock available. Designed, developed, and manufactured in the USA.