Brownells Iberica - El mayor proveedor de accesorios para el Tiro, Piezas y herramientas del armero. España

MANSON PRECISION
REM CHOKE-STYLE TOOLING

513046012
Fast, Accurate Choke Tube Installations Using Reamers From Dave Manson
A quick and easy method to install choke tubes using a lathe (can be done by hand, however, a lathe gives superior results). Tap and reamer are precision ground from high speed steel and use the same interchangeable pilot bushings. Reamer has an enhanced end relief that provides a faster cut. Pilot bushings are available in diameter increments of .001", and are 2" long for accurate bore alignment. Factory instructions are included. Note: Read and understand the installation requirements on page 62 before proceeding. For best results, remove any existing choke with the Angle Blade Expanding Choke Reamer prior to using the Loon Lake Choke reamer. Click here for proper installation requirements.Uses the same tap and bushings as Win-Choke, requires a different reamer to position threads in a different location. Barrels threaded to this system accept Rem-Choke-style and Remington factory tubes.
SPECS: 12 gauge only. .814"-32 tpi.
334.9 334.9 1 EUR
New
N.º de producto: 513046012
MANSON PRECISION 12 GAUGE REM-CHOKE REAMER
Ref Fabricante: RC12GAR Un método rápido y fácil para instalar tubos de choke utilizando un torno (aunque se puede hacer a mano, el uso de un torno ofrece resultados superiores). El macho de roscar y el escariador están fabricados con acero de alta velocidad y precisión, y utilizan las mismas guías piloto intercambiables. El escariador tiene un alivio de extremo mejorado que proporciona un corte más rápido. Las guías piloto están disponibles en incrementos de diámetro de .001", y tienen 2" de longitud para un alineamiento preciso del cañón. Se incluyen instrucciones de fábrica. Nota: Lee y comprende los requisitos de instalación en la página 62 antes de proceder. Para obtener los mejores resultados, elimina cualquier choke existente con el escariador expansivo de cuchilla angular antes de usar el escariador de choke Loon Lake. Haz clic aquí para conocer los requisitos de instalación adecuados.Se utiliza el mismo macho de roscar y guías que Win-Choke, pero se requiere un escariador diferente para posicionar los hilos en una ubicación diferente. Los cañones roscados con este sistema aceptan tubos al estilo Rem-Choke y tubos de fábrica de Remington.
334.9 EUR 0 334,90 € *
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Caracteristicas: Calibre: 12 Gauge Hacer: Remington Modelo: Universal Shotguns

Restricciones

  • Limitacion de edad: 18 años
  • Permiso requerido

Atributos

Calibre: 12 Gauge Hacer: Remington Modelo: Universal Shotguns Peso de entrega: 0,318kg Altura de envío: 28mm Ancho de envío: 36mm Longitud de envío: 229mm

Detalles del artículo

Hecho en USA




Fast, Accurate Choke Tube Installations Using Reamers From Dave Manson
A quick and easy method to install choke tubes using a lathe (can be done by hand, however, a lathe gives superior results). Tap and reamer are precision ground from high speed steel and use the same interchangeable pilot bushings. Reamer has an enhanced end relief that provides a faster cut. Pilot bushings are available in diameter increments of .001", and are 2" long for accurate bore alignment. Factory instructions are included. Note: Read and understand the installation requirements on page 62 before proceeding. For best results, remove any existing choke with the Angle Blade Expanding Choke Reamer prior to using the Loon Lake Choke reamer. Click here for proper installation requirements.Uses the same tap and bushings as Win-Choke, requires a different reamer to position threads in a different location. Barrels threaded to this system accept Rem-Choke-style and Remington factory tubes.
SPECS: 12 gauge only. .814"-32 tpi.
Newsletters