Más de 300,000 clientes - ¡les damos las gracias!

40,000+ productos para caza y deportes de tiro

El adaptador LEO Buttstock de Mesa Tactical permite instalar un AR-15 grip y un carbine receiver extension sin alteraciones permanentes a tu Moss 500.

MESA TACTICAL PRODUCTS LEO BUTTSTOCK ADAPTER, MOSS 500

878405001263 100011375

Atributos

  • Calibre:
    12 Gauge
  • Caracteristicas: -
  • Color: -
  • Material: -
  • Modelo:
    500
  • Tipo de arma:
    Mossberg
  • Peso de entrega: 0,318kg
  • UPC: 878405001263

Detalles del artículo

Hecho en USA
  • Especificaciones:
  • Calibre: 12 Gauge
  • Hacer: Mossberg
  • Modelo: 500
0 0 1 EUR

No disponible.

N.º de producto: 100011375

N.º fabr.: 93170

Notificar sobre disponibilidad 124.9 EUR
0 0 1 EUR
Descripción Specification Opiniones de clientes Accessories

MESA TACTICAL PRODUCTS LEO BUTTSTOCK ADAPTER, MOSS 500

Notificar sobre disponibilidad

Descripción:

Mostrar original (inglés)

Mejora tu arma con el adaptador de culata LEO

El LEO BUTTSTOCK ADAPTER de MESA TACTICAL PRODUCTS es la solución perfecta para quienes buscan versatilidad y comodidad en su arma. Este adaptador de aluminio se monta fácilmente en la parte trasera del receptor sin necesidad de realizar alteraciones permanentes a tu arma.

Características del producto:

  • Material: Aluminio A-356 T6
  • Acabado: Anodizado duro, gris oscuro, acabado mate
  • Compatibilidad: Acepta empuñaduras estándar AR-15 y extensiones de receptor de carabina

Con el adaptador LEO, puedes personalizar tu arma a tu manera, manteniendo la funcionalidad y el estilo que deseas. ¡No esperes más para mejorar tu experiencia de tiro!



Atributos

  • Calibre:
    12 Gauge
  • Caracteristicas: -
  • Color: -
  • Material: -
  • Modelo:
    500
  • Tipo de arma:
    Mossberg
  • Peso de entrega: 0,318kg
  • UPC: 878405001263

Detalles del artículo

Hecho en USA

Opiniones de clientes

Calificaciones de clientes (2)

2,5 / 5
No recomendable

Brownells USA Too high for a bead, too low for optics 17/03/2014

Headline says it all. Cheek weld with this adapter and an M4 style collapsable stock is too high to use a single bead and too low to use an optic.

Recomendable

Brownells USA Solid Adapter for the Rem 870 Workhorse 10/12/2013

Mesa Tactical makes good kit, and this is no exception. This review will attempt to point out a few suggestions for anyone interested in this item.
FINISH: OK, but mine had a few very small mars (possibly due to a delivery screw up). For a hard use firearm this is acceptable.
BARREL BEAD: The LEO adapter is the "low" version that makes the bead "useable," but not optimal. Unless your eyes are close to your cheekweld, your eyes will be a little high for "down the barrel" sighting. This is normal for a straight stock. It is possible to shim the adapter to allow a very small downward angle to the tube and stock, but this will contribute to muzzle rise. Make sure the washer is properly seated as the washer can also affect stock angle. I am still playing with this.
GRIP NUT: I used the supplied grip nut and it interfered with the bolt securing the adapter to the receiver, making the stock higher than it should have been. Go to the hardware store and get a shorter nut (solved the problem for 15 cents).
GRIP CHOICE: If you plan to shoot heavier loads (slugs), I recommend a grip with some padding, such as the Hogue Overmolded or the Ergo. Also, if you plan to run the stock with a very short LOP (i.e., close to the adapter), then use a grip with a more vertical rake than the usual USGI to permit a more comfortable wrist angle. Finally, I had to trim the extended backstrap on an Ergo to get it to fit properly.
STOCK: I went with the Magpul MOE because the friction lock extension on the Magpul CTR interfered with my thumb when the stock was completely closed.
FINAL THOUGHT: I would not count on installing this unit and saying "done." Changes to the grip or the adapter will require removal of the stock tube, so don't locktite or stake the unit together until you are satisfied. I learned a lot about the adapter by shooting a few rounds of trap and a bunch of slugs.

¿Sabías que?

Información del fabricante

Operador económico responsable según el reglamento de la UE

Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es

¡Ups! Algo salió mal.

Hemos encontrado un error al cargar este contenido. Actualice la página para continuar. Si el problema persiste, póngase en contacto con nuestro servicio de atención al cliente.

Volver arriba