Helps prevent dinged and damaged scope tubes by removing high spots to quickly true misaligned or out-of-round scope rings so they're perfectly in line. Also works to turn-in and rough align rotary dovetail rings. Dual-handles with multiple, transverse, lapping compound grooves give complete control and fast results. Includes lapping compound.
SPECS: Mild steel, in-the-white. 12" (30cm) long, 1" (2.5cm) or 30mm (1.187") dia. Includes (2) plastic handles and instructions.
Más...
Nivela fresa ésta quede & alinea los anillos de alcance; Previene el daño
Ayuda a prevenir lastimado y dañado alcance tubos mediante la eliminación de los puntos altos a anillos rápidamente verdadero alcance desalineada o hacia fuera-de-redondo así están perfectamente en línea. También trabaja para girar y áspera alinee anillos rotatorios de cola de Milano. Dual-manijas con múltiples, transversal, traslapar surcos compuestos dan un control completo y resultados rápidos. Incluye lapeado compuesto.
Especificaciones: leve acero, en-el-blanco. 12"(30cm largo, 1" (2,5 cm) o 30 mm (1,187") de diámetro incluye (2) plásticas manijas e instrucciones).
Más...
Evaluaciones de clientes para BROWNELLS 30MM SCOPE RING ALIGNMENT LAP
Número de evaluaciones: 4
De brownells.com: 4
Evaluación media: 3,8
30MM lapping bar(04/04/2010)
I used this 30 MM lapping bar for the rings on a new NF 8X32. It worked great. at start I had .020 gap on both sides of the rings with hard points on rear of both sets. After lapping, I had over 80% contact with tube and just onder .010 gap at ring split lines. I now have a 1" lapping bar to go with this one.
Everyone should have one of these!(30/12/2011)
I don't think you can get any better quality in a lapping tool. This thing is solid steel and very heavy duty. The multiple handle attachment points are very nice as well. This item comes with the 800 grit lapping compound which worked very well but took awhile to get full 80% contact on the rings. I would recommend purchasing the 600 grit compound separately to speed the process up a little bit or buy an extra six pack of beer. Overall I am very satisfied with my purchase and will be purchasing a 1" model to go with this one.... and some extra 600 grit compound.
disappointed...(24/03/2015)
it's just a piece of 1 3/16 raw cold rolled bar. The lapping surface is not machined. Mine spec'd out at 30.06>30.12 I didnt even bother to check the run out. I measured all my 30mm scopes and they were all 29.95 and mounted in Mark4 steel rings that this bar will never touch
A better product than cheaper versions(24/11/2010)
Unlike cheaper versions from other suppliers, this lap has grooves for carrying lapping compound. It also has multiple handle attachment points, which is important when working rings that are very close together (or very far apart), or when the structure of the firearm only allows access from certain positions.
A few quick passes will let you know whether you're close ... and to keep going ... or you're not, in which case you may need a reamer (such as the one from Clymer) or perhaps a new set of rings.
N.º de producto: 080903130 BROWNELLS 30MM SCOPE RING ALIGNMENT LAP Ayuda a prevenir lastimado y dañado alcance tubos mediante la eliminación de los puntos altos a anillos rápidamente verdadero alcance desalineada o hacia fuera-de-redondo así están perfectamente en línea. También trabaja para girar y áspera alinee anillos rotatorios de cola de Milano. Dual-manijas con múltiples, transversal, traslapar surcos compuestos dan un control completo y resultados rápidos. Incluye lapeado compuesto.
Peso de entrega: 1,905kgAltura: 74mmAnchura: 91mmLongitud: 411mm
Detalles del artículo
Hecho en USA
Sale
N.º de producto: 080903100 BROWNELLS 1" SCOPE RING ALIGNMENT LAP Ayuda a prevenir lastimado y dañado alcance tubos mediante la eliminación de los puntos altos a anillos rápidamente verdadero alcance desalineada o hacia fuera-de-redondo así están perfectamente en línea. También trabaja para girar y áspera alinee anillos rotatorios de cola de Milano. Dual-manijas con múltiples, transversal, traslapar surcos compuestos dan un control completo y resultados rápidos. Incluye lapeado compuesto.
Helps prevent dinged and damaged scope tubes by removing high spots to quickly true misaligned or out-of-round scope rings so they're perfectly in line. Also works to turn-in and rough align rotary dovetail rings. Dual-handles with multiple, transverse, lapping compound grooves give complete control and fast results. Includes lapping compound.
SPECS: Mild steel, in-the-white. 12" (30cm) long, 1" (2.5cm) or 30mm (1.187") dia. Includes (2) plastic handles and instructions.
Más...
Nivela fresa ésta quede & alinea los anillos de alcance; Previene el daño
Ayuda a prevenir lastimado y dañado alcance tubos mediante la eliminación de los puntos altos a anillos rápidamente verdadero alcance desalineada o hacia fuera-de-redondo así están perfectamente en línea. También trabaja para girar y áspera alinee anillos rotatorios de cola de Milano. Dual-manijas con múltiples, transversal, traslapar surcos compuestos dan un control completo y resultados rápidos. Incluye lapeado compuesto.
Especificaciones: leve acero, en-el-blanco. 12"(30cm largo, 1" (2,5 cm) o 30 mm (1,187") de diámetro incluye (2) plásticas manijas e instrucciones).
Más...
Evaluaciones de clientes para BROWNELLS 30MM SCOPE RING ALIGNMENT LAP
Número de evaluaciones: 4
De brownells.com: 4
Evaluación media: 3,8
30MM lapping bar(04/04/2010)
I used this 30 MM lapping bar for the rings on a new NF 8X32. It worked great. at start I had .020 gap on both sides of the rings with hard points on rear of both sets. After lapping, I had over 80% contact with tube and just onder .010 gap at ring split lines. I now have a 1" lapping bar to go with this one.
Everyone should have one of these!(30/12/2011)
I don't think you can get any better quality in a lapping tool. This thing is solid steel and very heavy duty. The multiple handle attachment points are very nice as well. This item comes with the 800 grit lapping compound which worked very well but took awhile to get full 80% contact on the rings. I would recommend purchasing the 600 grit compound separately to speed the process up a little bit or buy an extra six pack of beer. Overall I am very satisfied with my purchase and will be purchasing a 1" model to go with this one.... and some extra 600 grit compound.
disappointed...(24/03/2015)
it's just a piece of 1 3/16 raw cold rolled bar. The lapping surface is not machined. Mine spec'd out at 30.06>30.12 I didnt even bother to check the run out. I measured all my 30mm scopes and they were all 29.95 and mounted in Mark4 steel rings that this bar will never touch
A better product than cheaper versions(24/11/2010)
Unlike cheaper versions from other suppliers, this lap has grooves for carrying lapping compound. It also has multiple handle attachment points, which is important when working rings that are very close together (or very far apart), or when the structure of the firearm only allows access from certain positions.
A few quick passes will let you know whether you're close ... and to keep going ... or you're not, in which case you may need a reamer (such as the one from Clymer) or perhaps a new set of rings.
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.