One-piece, MIL-STD 1913 Picatinny rail allows mounting a variety of optics and tactical sights on popular Mossberg, Remington, and Benelli shotguns. Streamlined, low profile design installs to the top of the receiver for a smooth “built-in” appearance. Four slotted flat head screws and washers secure rail to receiver for exceptional holding power. Precision machined from 6061-T6 aluminum, then mil-spec Type III hardcoat anodized for added strength. Fits shotguns with factory drilled and tapped receivers or receivers custom that require drilling and tapping for appropriate threads.
SPECS: 6061 T6 aluminum, Type III hardcoat anodized, matte black. Fits factory drilled and tapped receivers. Includes mounting hardware and instructions. Mossberg – 5½" (13.9cm) long. Fits 1997 and later-mfr pump action shotguns; can be installed on 930 semi-auto with additional fitting. Benelli M2 - 4½" (11.4cm) long. Drop-in fit on M2 Tactical; can also be installed on round-top M1 after drilling and tapping receiver. Comes with 4 slotted flat head screws and 4 washers.
Más...
Monta Ópticas o Mira Tácticas
Una pieza única, riel Picatinny MIL-STD 1913 permite montar una variedad de ópticas y miras tácticas en escopetas populares de Mossberg, Remington y Benelli. Diseño simplificado y de bajo perfil que se instala en la parte superior del receptor para una apariencia integrada y “de fábrica”. Cuatro tornillos de cabeza plana ranurados y arandelas aseguran el riel al receptor con una fuerza de sujeción excepcional. Mecanizado con precisión a partir de aluminio 6061-T6, luego anodizado duro mil-spec Tipo III para mayor resistencia. Apto para escopetas con receptores perforados y roscados de fábrica o receptores personalizados que requieren perforación y roscado para los hilos apropiados.
ESPECIFICACIONES: Aluminio 6061 T6, anodizado duro tipo III, negro mate. Apto para receptores perforados y roscados de fábrica. Incluye herrajes de montaje e instrucciones. Mossberg – 5½" (13.9cm) de largo. Apto para escopetas de acción de bombeo fabricadas en 1997 y posteriores; se puede instalar en el 930 semi-automático con ajustes adicionales. Benelli M2 - 4½" (11.4cm) de largo. Encaje directo en el M2 Tactical; también se puede instalar en el M1 de parte superior redonda después de perforar y roscar el receptor. Viene con 4 tornillos de cabeza plana ranurados y 4 arandelas.
Más...
Evaluaciones de clientes para MESA TACTICAL PRODUCTS BENELLI M2 RECEIVER RAIL
Número de evaluaciones: 5
De brownells.com: 5
Evaluación media: 4,4
Nice Rail(02/10/2012)
This is a well made rail. It was a good match to the top of the Rem. 870 receiver. The only down-side was that it wasn't supplied with 8-40 hardware as advertised, but 6-48 screws. I had to spend a little more time hunting up the correct tap.
Mesa Tactical should also add a schematic that shows the hole spacing (center to center). This would save the gunsmith some time and eliminate one spot where he might make a mistake.
A good product at a good price.(25/08/2015)
Australian Border force that were Australian Customs and Border Security have commissioned me to put a receiver rail on some of their shotguns for them to assess their suitability as a tactical shotgun base for their shotguns.
I found that the front screw was a bit short and I had to deepen the front screw hole to ensure full engagement of the screw.
Other that that I am pleased with this product and am sure we will be ordering more in the near future.
We have to order under $100 US and that is inconvenient but that is the law.
Awesome Product(09/08/2017)
Had a Remington Wingmaster come into the shop to get Cerakote and have a rail installed on it. Went with this Mesa Tactical one caused it looked pretty well built. Got it in and was able to install it. It fit like a glove and the screws were all sized to length, even the one the goes over the barrel and bolt. All I had to do was drill and tap the holes. Great product.
Works as advertised(07/09/2009)
Not much to it, a rail and 4 screws. I bought this knowing I would have to tap the receiver of my 870 to mount it. The rail looks good on the receiver and holds my Aimpoint in place. The hardest part of the install was finding the tap (my snapon set didn't have it) and making sure that the rail is straight. It required fitting on my gun since it wasn't tapped from the factory. Overall, recommend.
Just what I needed(09/06/2010)
I used this rail for my Mossberg 590 and I didnt need to tap anything on my receiver. There were pre drilled holes already on the top of the receiver and they fit perfectly.
N.º de producto: 100005803 MESA TACTICAL PRODUCTS BENELLI M2 RECEIVER RAIL Ref Fabricante: 92390878405001041 Una pieza única, riel Picatinny MIL-STD 1913 permite montar una variedad de ópticas y miras tácticas en escopetas populares de Mossberg, Remington y Benelli. Diseño simplificado y de bajo perfil que se instala en la parte superior del receptor para una apariencia integrada y “de fábrica”. Cuatro tornillos de cabeza plana ranurados y arandelas aseguran el riel al receptor con una fuerza de sujeción excepcional. Mecanizado con precisión a partir de aluminio 6061-T6, luego anodizado duro mil-spec Tipo III para mayor resistencia. Apto para escopetas con receptores perforados y roscados de fábrica o receptores personalizados que requieren perforación y roscado para los hilos apropiados.
Acabado:
Matte Black
Estilo:
Rail
Hacer:
Benelli
Modelo:
M2
Peso de entrega: 0,068kgAltura de envío: 23mmAncho de envío: 114mmLongitud de envío: 140mm
Detalles del artículo
Hecho en USA
N.º de producto: 100004034 MESA TACTICAL PRODUCTS MOSSBERG 500 RECEIVER RAIL Ref Fabricante: 90770400000089041 Una pieza única, riel Picatinny MIL-STD 1913 permite montar una variedad de ópticas y miras tácticas en escopetas populares de Mossberg, Remington y Benelli. Diseño simplificado y de bajo perfil que se instala en la parte superior del receptor para una apariencia integrada y “de fábrica”. Cuatro tornillos de cabeza plana ranurados y arandelas aseguran el riel al receptor con una fuerza de sujeción excepcional. Mecanizado con precisión a partir de aluminio 6061-T6, luego anodizado duro mil-spec Tipo III para mayor resistencia. Apto para escopetas con receptores perforados y roscados de fábrica o receptores personalizados que requieren perforación y roscado para los hilos apropiados.
One-piece, MIL-STD 1913 Picatinny rail allows mounting a variety of optics and tactical sights on popular Mossberg, Remington, and Benelli shotguns. Streamlined, low profile design installs to the top of the receiver for a smooth “built-in” appearance. Four slotted flat head screws and washers secure rail to receiver for exceptional holding power. Precision machined from 6061-T6 aluminum, then mil-spec Type III hardcoat anodized for added strength. Fits shotguns with factory drilled and tapped receivers or receivers custom that require drilling and tapping for appropriate threads.
SPECS: 6061 T6 aluminum, Type III hardcoat anodized, matte black. Fits factory drilled and tapped receivers. Includes mounting hardware and instructions. Mossberg – 5½" (13.9cm) long. Fits 1997 and later-mfr pump action shotguns; can be installed on 930 semi-auto with additional fitting. Benelli M2 - 4½" (11.4cm) long. Drop-in fit on M2 Tactical; can also be installed on round-top M1 after drilling and tapping receiver. Comes with 4 slotted flat head screws and 4 washers.
Más...
Monta Ópticas o Mira Tácticas
Una pieza única, riel Picatinny MIL-STD 1913 permite montar una variedad de ópticas y miras tácticas en escopetas populares de Mossberg, Remington y Benelli. Diseño simplificado y de bajo perfil que se instala en la parte superior del receptor para una apariencia integrada y “de fábrica”. Cuatro tornillos de cabeza plana ranurados y arandelas aseguran el riel al receptor con una fuerza de sujeción excepcional. Mecanizado con precisión a partir de aluminio 6061-T6, luego anodizado duro mil-spec Tipo III para mayor resistencia. Apto para escopetas con receptores perforados y roscados de fábrica o receptores personalizados que requieren perforación y roscado para los hilos apropiados.
ESPECIFICACIONES: Aluminio 6061 T6, anodizado duro tipo III, negro mate. Apto para receptores perforados y roscados de fábrica. Incluye herrajes de montaje e instrucciones. Mossberg – 5½" (13.9cm) de largo. Apto para escopetas de acción de bombeo fabricadas en 1997 y posteriores; se puede instalar en el 930 semi-automático con ajustes adicionales. Benelli M2 - 4½" (11.4cm) de largo. Encaje directo en el M2 Tactical; también se puede instalar en el M1 de parte superior redonda después de perforar y roscar el receptor. Viene con 4 tornillos de cabeza plana ranurados y 4 arandelas.
Más...
Evaluaciones de clientes para MESA TACTICAL PRODUCTS BENELLI M2 RECEIVER RAIL
Número de evaluaciones: 5
De brownells.com: 5
Evaluación media: 4,4
Nice Rail(02/10/2012)
This is a well made rail. It was a good match to the top of the Rem. 870 receiver. The only down-side was that it wasn't supplied with 8-40 hardware as advertised, but 6-48 screws. I had to spend a little more time hunting up the correct tap.
Mesa Tactical should also add a schematic that shows the hole spacing (center to center). This would save the gunsmith some time and eliminate one spot where he might make a mistake.
A good product at a good price.(25/08/2015)
Australian Border force that were Australian Customs and Border Security have commissioned me to put a receiver rail on some of their shotguns for them to assess their suitability as a tactical shotgun base for their shotguns.
I found that the front screw was a bit short and I had to deepen the front screw hole to ensure full engagement of the screw.
Other that that I am pleased with this product and am sure we will be ordering more in the near future.
We have to order under $100 US and that is inconvenient but that is the law.
Awesome Product(09/08/2017)
Had a Remington Wingmaster come into the shop to get Cerakote and have a rail installed on it. Went with this Mesa Tactical one caused it looked pretty well built. Got it in and was able to install it. It fit like a glove and the screws were all sized to length, even the one the goes over the barrel and bolt. All I had to do was drill and tap the holes. Great product.
Works as advertised(07/09/2009)
Not much to it, a rail and 4 screws. I bought this knowing I would have to tap the receiver of my 870 to mount it. The rail looks good on the receiver and holds my Aimpoint in place. The hardest part of the install was finding the tap (my snapon set didn't have it) and making sure that the rail is straight. It required fitting on my gun since it wasn't tapped from the factory. Overall, recommend.
Just what I needed(09/06/2010)
I used this rail for my Mossberg 590 and I didnt need to tap anything on my receiver. There were pre drilled holes already on the top of the receiver and they fit perfectly.
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.