Brownells Iberica - El mayor proveedor de accesorios para el Tiro, Piezas y herramientas del armero. España

APEX TACTICAL SPECIALTIES INC
S&W M&P M2.0 FDE FLAT FACED FORWARD SET TRIGGER KIT

854263007760 100032858
Forward Set Trigger: Reduces Trigger Pre-Travel and Over Travel. Increases reach length to trigger face for shooters with longer fingers. Allows shooter to position finger lower on trigger face for increased lev-erage and therefore take advantage of lower trigger pull weights for competition. Patent Pending Sear Actuator: Shortens the stroke of the trigger pull by dropping the striker at a point farther forward than the factory component. Ultimate Striker Block Kit: Improved radius on the Striker Block Face produces a smoother trigger pull and eliminates most false reset issues. Forward Set Spring Kit: The full spring kit produces a 4lb to 5lb trigger pull. Expected results: Trigger pull weight between the 4lb and 6lb mark (Dependent on trigger return spring and sear spring installed) Smooth uptake and reset Reduces Pre Travel Reduces Over Travel Center mounted pivoting safety maintains factory safety values Works with S&W M&P M2.0 pistols in 9mm, .40 S&W, and .45 ACP calibers Does NOT function in the original M&P or M&P Shield models
294.9 294.9 1 EUR
New
N.º de producto: 100032858
APEX TACTICAL SPECIALTIES INC S&W M&P M2.0 FDE FLAT FACED FORWARD SET TRIGGER KIT
Ref Fabricante: 100-159 854263007760 Gatillo de Avance Rápido: Reduce el recorrido previo y el exceso de recorrido del gatillo. Aumenta la longitud de alcance a la cara del gatillo para tiradores con dedos más largos. Permite al tirador posicionar el dedo más abajo en la cara del gatillo para aumentar la palanca y, por lo tanto, aprovechar los pesos de disparo más bajos para competición. Actuador de Martillo Pendiente de Patente: Acorta el recorrido del disparo al soltar el percutor en un punto más adelante que el componente de fábrica. Kit de Bloqueo del Percutor Definitivo: Un radio mejorado en la Cara del Bloqueo del Percutor produce un disparo más suave y elimina la mayoría de los problemas de reinicio falso. Kit de Muelles de Avance Rápido: El kit completo de muelles produce un peso de disparo de 4lb a 5lb. Resultados esperados: Peso de disparo entre 4lb y 6lb (Dependiendo del muelle de retorno del gatillo y el muelle del martillo instalados) Recorrido suave y reinicio Reduce el Recorrido Previo Reduce el Exceso de Recorrido Seguridad pivotante montada en el centro mantiene los valores de seguridad de fábrica Compatible con pistolas S&W M&P M2.0 en calibres 9mm, .40 S&W y .45 ACP No funciona en los modelos originales M&P o M&P Shield
294.9 EUR 10 294,90 € *
Plazo de entrega de aproximadamente 14-21 días.
Más de 10 pcs. en almacén de EE.UU.
Caracteristicas: Acabado: Flat Dark Earth Estilo: Flat Hacer: Smith & Wesson Modelo: M&P M2.0

Atributos

Acabado: Flat Dark Earth Estilo: Flat Hacer: Smith & Wesson Modelo: M&P M2.0 Peso de entrega: 0,029kg Altura de envío: 32mm Ancho de envío: 102mm Longitud de envío: 108mm

Detalles del artículo

Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.c



Forward Set Trigger: Reduces Trigger Pre-Travel and Over Travel. Increases reach length to trigger face for shooters with longer fingers. Allows shooter to position finger lower on trigger face for increased lev-erage and therefore take advantage of lower trigger pull weights for competition. Patent Pending Sear Actuator: Shortens the stroke of the trigger pull by dropping the striker at a point farther forward than the factory component. Ultimate Striker Block Kit: Improved radius on the Striker Block Face produces a smoother trigger pull and eliminates most false reset issues. Forward Set Spring Kit: The full spring kit produces a 4lb to 5lb trigger pull. Expected results: Trigger pull weight between the 4lb and 6lb mark (Dependent on trigger return spring and sear spring installed) Smooth uptake and reset Reduces Pre Travel Reduces Over Travel Center mounted pivoting safety maintains factory safety values Works with S&W M&P M2.0 pistols in 9mm, .40 S&W, and .45 ACP calibers Does NOT function in the original M&P or M&P Shield models
Newsletters