No need to drill and tap a rock-hard Springfield with this No-Drill, No-Tap Mount. No need to bend the bolt, a simple grinding of the bolt handle for clearance is all that’s needed. Blends in well with original finish. Will not fit the 1903/1903 Mark I.
SPECS: Alum., black, anodized. Uses standard Weaver-style 1" (2.5cm) rings, not supplied. Wt. 3 oz. (85 g). 5-5⁄16" (13.5cm) long.
Más...
No es necesario perforar y roscar un Springfield extremadamente duro con este soporte No-Drill, No-Tap. No hay que doblar el cerrojo, solo es necesario un simple rectificado del mango del cerrojo para que haya espacio. Se integra bien con el acabado original. No es compatible con el 1903/1903 Mark I.
ESPECIFICACIONES: Aluminio, negro, anodizado. Utiliza anillos estándar Weaver-style de 1" (2.5cm), no incluidos. Peso: 3 oz. (85 g). Longitud: 5-5⁄16" (13.5cm).
Más...
Evaluaciones de clientes para S&K 1903 A3 SPRINGFIELD DOVETAIL IN REAR (WEAVER)
Número de evaluaciones: 6
De brownells.com: 6
Evaluación media: 4,8
Nice product(22/11/2011)
This no gunsmithing mount works as advertised but you may have to do minor trimming of the handguard as it will be too long "IF" you use the handguard retaining ring. Stock will also have to be notched slightly if you use the handguard retaining ring as the mount slightly pushes it forward. I bought an extra handguard and saved my original. You can find them cheap online.
Easy to install, secure(10/07/2012)
Easy to install on my Springfield M1903-A3. Had to use a dremmel on my stock to make the ring around the barrel for the front mount to fit. It was a synthetic stock so it only took 30 minutes to make it a nice fit. Fits very tight and secure.
every install is different(25/03/2013)
had to cut top foreend piece shorter,then fiqure a way to secure it to stock from moving side to side.
update on first review(31/03/2013)
I ended up reuseing the stock ring.With a little extra thought,I cut the upper portion of the stock about a quarter of an inch shorter,and used a dremmel tool to fit.Great tool!I bought Accushot Premium 1-inch Weaver Style See-Thru Medium Profile Rings.The bolt handle clears the scope by 3/16 inch.I installed a Tasco Varmint 2.5-10x 42mm True Mil-Dot Reticle,1/4 MOA Turrets Riflescope.Looks great.
Ease of installation(02/11/2013)
Mounted easy, great design! Brownell your the greatest too. Ordered this product at 3:00 on the 28th of Oct. Received it the 30th. Thanks for a great transaction!!!!!!!!!!!!!!!!!!!
s&k 03a3 mount(11/04/2015)
This is great product easy to install looks good on the rifle
N.º de producto: 794001033 S&K 1903 A3 SPRINGFIELD DOVETAIL IN REAR (WEAVER) Ref Fabricante: 1570 No es necesario perforar y roscar un Springfield extremadamente duro con este soporte No-Drill, No-Tap. No hay que doblar el cerrojo, solo es necesario un simple rectificado del mango del cerrojo para que haya espacio. Se integra bien con el acabado original. No es compatible con el 1903/1903 Mark I.
94.9EUR094,90 €
*
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Caracteristicas:Color: BlackEstilo: Weaver-Style BasesHacer: SpringfieldMaterial: AluminioModelo: 03-A3Numero de bases: 1-Piece
Color:
Black
Estilo:
Weaver-Style Bases
Hacer:
Springfield
Material:
Aluminio
Modelo:
03-A3
Numero de bases:
1-Piece
Peso de entrega: 0,136kgAltura de envío: 25mmAncho de envío: 97mmLongitud de envío: 173mm
No need to drill and tap a rock-hard Springfield with this No-Drill, No-Tap Mount. No need to bend the bolt, a simple grinding of the bolt handle for clearance is all that’s needed. Blends in well with original finish. Will not fit the 1903/1903 Mark I.
SPECS: Alum., black, anodized. Uses standard Weaver-style 1" (2.5cm) rings, not supplied. Wt. 3 oz. (85 g). 5-5⁄16" (13.5cm) long.
Más...
No es necesario perforar y roscar un Springfield extremadamente duro con este soporte No-Drill, No-Tap. No hay que doblar el cerrojo, solo es necesario un simple rectificado del mango del cerrojo para que haya espacio. Se integra bien con el acabado original. No es compatible con el 1903/1903 Mark I.
ESPECIFICACIONES: Aluminio, negro, anodizado. Utiliza anillos estándar Weaver-style de 1" (2.5cm), no incluidos. Peso: 3 oz. (85 g). Longitud: 5-5⁄16" (13.5cm).
Más...
Evaluaciones de clientes para S&K 1903 A3 SPRINGFIELD DOVETAIL IN REAR (WEAVER)
Número de evaluaciones: 6
De brownells.com: 6
Evaluación media: 4,8
Nice product(22/11/2011)
This no gunsmithing mount works as advertised but you may have to do minor trimming of the handguard as it will be too long "IF" you use the handguard retaining ring. Stock will also have to be notched slightly if you use the handguard retaining ring as the mount slightly pushes it forward. I bought an extra handguard and saved my original. You can find them cheap online.
Easy to install, secure(10/07/2012)
Easy to install on my Springfield M1903-A3. Had to use a dremmel on my stock to make the ring around the barrel for the front mount to fit. It was a synthetic stock so it only took 30 minutes to make it a nice fit. Fits very tight and secure.
every install is different(25/03/2013)
had to cut top foreend piece shorter,then fiqure a way to secure it to stock from moving side to side.
update on first review(31/03/2013)
I ended up reuseing the stock ring.With a little extra thought,I cut the upper portion of the stock about a quarter of an inch shorter,and used a dremmel tool to fit.Great tool!I bought Accushot Premium 1-inch Weaver Style See-Thru Medium Profile Rings.The bolt handle clears the scope by 3/16 inch.I installed a Tasco Varmint 2.5-10x 42mm True Mil-Dot Reticle,1/4 MOA Turrets Riflescope.Looks great.
Ease of installation(02/11/2013)
Mounted easy, great design! Brownell your the greatest too. Ordered this product at 3:00 on the 28th of Oct. Received it the 30th. Thanks for a great transaction!!!!!!!!!!!!!!!!!!!
s&k 03a3 mount(11/04/2015)
This is great product easy to install looks good on the rifle
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.