The Strike Magazine for GLOCK™ G17 (9mm) is a high-strength impact resistant custom blended SI Polymer Extreme double-stack pistol mag that includes a translucent body for quick visibility of ammo and a specially selected spring for added reliability. The capacity of the 17+ round translucent magazine body is designed with strategically placed textured and non-textured surfaces. Textured where it’s needed to reduce the shine of the brass and add positive feel. Non-textured at one side for ultra-clear visibility of round count and what’s going on inside. Not only is the mag body translucent, there are also corner round count cuts to give you alternative angles to see how many you got left for the fight. Magazine release cuts are designed on both sides the SI mag and is compatible with right, left and ambidextrous release setups found on factory GLOCK™ GEN3-GEN5 frames. The Strike Magazine for GLOCK™ G17 has a built-in hook slot specifically for the SI Extended Magazine Plate (EMP) steel locking plate for an added extra security when increasing capacity but the baseplate included also has standout features. Side cuts on the baseplate provides easier gripping. Paintable triangle markers at the top of mag body to help identify the magazine is in the correct direction when reloading. ID markers at the bottom of the baseplate allow you to custom mark your mags and also make sure nobody goes home with your stuff. Along with the side cuts, the baseplate also has an added front lip for an increased footprint to help with the standing of the mag to give it a little balance. The included baseplate is a tool-less disassembly design for quick and easy removal with a simply push using your finger nail. The Strike Magazine for GLOCK™ G17 (9mm) is fully loaded with features as an alternative option that should line the walls of your safe and gun bag. COMPATIBLE: -GEN3-5 GLOCK™ 17,17L,19,26,34 -SI Extended Magazine Plate (EMP) NOTE: Not for sale to California, Colorado, Connecticut, Hawaii, Illinois, Maryland, Massachusetts, New Jersey, New York, Vermont and Washington DC residents due to 10 or 15-round state laws. The checkout process will show NO shipping method available. LENGTH 125.55mm WIDTH 28.5mm HEIGHT 41.88mm Product features: -Capacity: 17+ rounds -Translucent magazine body with strategically placed textured and non-textured surfaces -Textured where it’s needed to reduce shine of brass and added positive feel -Non-textured at one side for ultra-clear visibility of round count -Corner round count cuts provides alternative angles to view ammo count from the side or rear of the magazine body -Increased magazine spring strength for reliability -Ambidextrous mag release cuts -Side cuts on baseplate provides easier gripping -Paintable triangle markers at the top of mag body to help identify the magazine is in the correct direction when reloading -ID markers on bottom of baseplate -Baseplate front lip for increased footprint when standing -Included baseplate is a tool-less disassembly design for quick and easy removal -Built-in hook slot specifically for SI Extended Magazine Plate (EMP) steel locking plate for added security when increasing capacity -High-strength impact resistant custom blended SI Polymer Extreme
¡Conoce el cargador perfecto para tu GLOCK™ G17!
El Cargador Strike para GLOCK™ G17 (9mm) es un cargador de alta resistencia, diseñado con un polímero SI Extreme, que ofrece una capacidad de 17+ rondas. Con su cuerpo translúcido, podrás ver rápidamente la cantidad de munición que te queda, y su resorte especialmente seleccionado garantiza una fiabilidad añadida.
Características del producto:
- Capacidad: 17+ rondas
- Cuerpo del cargador: Translúcido con superficies texturizadas y no texturizadas estratégicamente colocadas
- Texturizado: Donde se necesita para reducir el brillo del latón y mejorar el agarre
- No texturizado: En un lado para visibilidad ultra clara del conteo de rondas
- Cortes de conteo en las esquinas: Proporcionan ángulos alternativos para ver la cantidad de munición desde el lado o la parte trasera del cargador
- Mayor fuerza del resorte del cargador: Para una mayor fiabilidad
- Cortes de liberación ambidiestra: En ambos lados del cargador SI
- Cortes laterales en la base: Proporcionan un agarre más fácil
- Marcadores triangulares pintables: En la parte superior del cuerpo del cargador para identificar la dirección correcta al recargar
- Marcadores de identificación: En la parte inferior de la base
- Labio frontal en la base: Para una mayor estabilidad al estar de pie
- Diseño de desensamblaje sin herramientas: Para una rápida y fácil extracción
- Slot para gancho integrado: Específicamente para la placa de cargador extendido SI (EMP) para mayor seguridad al aumentar la capacidad
- Material: Polímero SI Extreme de alta resistencia y resistente a impactos
COMPATIBLE CON:
- GLOCK™ 17, 17L, 19, 26, 34 (GEN3-5)
- Placa de Cargador Extendida SI (EMP)
NOTA: No disponible para la venta a residentes de California, Colorado, Connecticut, Hawái, Illinois, Maryland, Massachusetts, Nueva Jersey, Nueva York, Vermont y Washington D.C. debido a las leyes estatales de 10 o 15 rondas. El proceso de compra mostrará que NO hay método de envío disponible.
Dimensiones:
- Longitud: 125.55mm
- Ancho: 28.5mm
- Altura: 41.88mm
Ayuda y contacto
Newsletters
Vista clásica
Vista móvil