Provides consistent accuracy through better production methods. Electro-discharge machined from 4140 steel, heat-treated to Rc 38-40, then vacuum tempered to help retain these tolerances for many years to come. One-piece blade is cut from solid steel barstock, so it won’t fly apart when your shot matters most. Consistent, click-adjustable detents for windage and elevation give precise repeatability.
SPECS: 4140 steel, blue, matte finish.
Más...
Producido por EDM de alambre para un ajuste y función precisos
Proporciona una precisión constante gracias a métodos de producción mejorados. Mecanizado por descarga eléctrica a partir de acero 4140, tratado térmicamente a Rc 38-40, y luego templado al vacío para ayudar a mantener estas tolerancias durante muchos años. La hoja de una pieza está cortada de una barra sólida de acero, por lo que no se desarmará cuando tu disparo sea más importante. Detentes ajustables y consistentes con clic para la deriva y la elevación que ofrecen una repetibilidad precisa.
ESPECIFICACIONES: Acero 4140, azul, acabado mate.
Más...
Evaluaciones de clientes para KENSIGHT MFG ELLIASON/ACCRO REAR TARGET SIGHT
Número de evaluaciones: 5
De brownells.com: 5
Evaluación media: 4,6
Well made sight(15/08/2012)
I have used several of these over the past few years. Just a small amount of fitting required to produce a snug fit. Precision made with repeatable adjustments.
Deeper notch is a big plus(06/08/2016)
I had the elevation screw break on the factory sight on my Colt Gold Cup, and decided to upgrade.
This sight is very high quality. Well machined with solid, definite clicks. The bigger notch helps me find the front sight easier and is wide enough to allow some "air" on each side. The fine serrations are well done. This sight allows me to shoot long range with greater ease.
Made in the USA is a big plus, from the great state of Georgia.
Elliason sight(15/02/2011)
I installed this sight on my Colt Python and love it fit perfectly, has very positive clicks and I love the serrated rear blade. looks identical and even says Elliason Awesome Product!!
Won't fit Combat Elite!(22/05/2018)
This will not fit a 1980s vintage Colt Combat Elite. These pistols have an Elliason sight, but retained by a 3/32" roll pin with the slide drilled for same. This sight has a 1/16" roll pin. The Combat Elite Elliason has a "hog belly" in the tang, allowing sufficient metal around the 3/32" hole. This sight does not have that feature and cannot simply be drilled out to 3/32".
Classic Target Sights(10/11/2009)
I have been shooting 1911s since the late 60s. I went from the classic G.I. issue sights to shooting Colt Gold Cups.
This style of sights is good for a person who carries a 1911 as a service pistol that has a need for precision shooting.
N.º de producto: 100002635 KENSIGHT MFG ELLIASON/ACCRO REAR TARGET SIGHT Ref Fabricante: 850-301755377863016 Proporciona una precisión constante gracias a métodos de producción mejorados. Mecanizado por descarga eléctrica a partir de acero 4140, tratado térmicamente a Rc 38-40, y luego templado al vacío para ayudar a mantener estas tolerancias durante muchos años. La hoja de una pieza está cortada de una barra sólida de acero, por lo que no se desarmará cuando tu disparo sea más importante. Detentes ajustables y consistentes con clic para la deriva y la elevación que ofrecen una repetibilidad precisa.
99.9EUR1099,90 €
*
Plazo de entrega de aproximadamente 14-21 días. Más de 10 pcs. en almacén de EE.UU.
Caracteristicas:Color del punto de mira: BlackEstilo: TargetHacer: 1911Modelo: Government, Commander, Officers
Color del punto de mira:
Black
Estilo:
Target
Hacer:
1911
Modelo:
Commander,Government,Officers
Peso de entrega: 0,005kgAltura de envío: 18mmAncho de envío: 66mmLongitud de envío: 107mm
Provides consistent accuracy through better production methods. Electro-discharge machined from 4140 steel, heat-treated to Rc 38-40, then vacuum tempered to help retain these tolerances for many years to come. One-piece blade is cut from solid steel barstock, so it won’t fly apart when your shot matters most. Consistent, click-adjustable detents for windage and elevation give precise repeatability.
SPECS: 4140 steel, blue, matte finish.
Más...
Producido por EDM de alambre para un ajuste y función precisos
Proporciona una precisión constante gracias a métodos de producción mejorados. Mecanizado por descarga eléctrica a partir de acero 4140, tratado térmicamente a Rc 38-40, y luego templado al vacío para ayudar a mantener estas tolerancias durante muchos años. La hoja de una pieza está cortada de una barra sólida de acero, por lo que no se desarmará cuando tu disparo sea más importante. Detentes ajustables y consistentes con clic para la deriva y la elevación que ofrecen una repetibilidad precisa.
ESPECIFICACIONES: Acero 4140, azul, acabado mate.
Más...
Evaluaciones de clientes para KENSIGHT MFG ELLIASON/ACCRO REAR TARGET SIGHT
Número de evaluaciones: 5
De brownells.com: 5
Evaluación media: 4,6
Well made sight(15/08/2012)
I have used several of these over the past few years. Just a small amount of fitting required to produce a snug fit. Precision made with repeatable adjustments.
Deeper notch is a big plus(06/08/2016)
I had the elevation screw break on the factory sight on my Colt Gold Cup, and decided to upgrade.
This sight is very high quality. Well machined with solid, definite clicks. The bigger notch helps me find the front sight easier and is wide enough to allow some "air" on each side. The fine serrations are well done. This sight allows me to shoot long range with greater ease.
Made in the USA is a big plus, from the great state of Georgia.
Elliason sight(15/02/2011)
I installed this sight on my Colt Python and love it fit perfectly, has very positive clicks and I love the serrated rear blade. looks identical and even says Elliason Awesome Product!!
Won't fit Combat Elite!(22/05/2018)
This will not fit a 1980s vintage Colt Combat Elite. These pistols have an Elliason sight, but retained by a 3/32" roll pin with the slide drilled for same. This sight has a 1/16" roll pin. The Combat Elite Elliason has a "hog belly" in the tang, allowing sufficient metal around the 3/32" hole. This sight does not have that feature and cannot simply be drilled out to 3/32".
Classic Target Sights(10/11/2009)
I have been shooting 1911s since the late 60s. I went from the classic G.I. issue sights to shooting Colt Gold Cups.
This style of sights is good for a person who carries a 1911 as a service pistol that has a need for precision shooting.
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.