Machined aluminum handguard mounts onto your AR-15 and free floats the barrel to relieve stress and help enhance accuracy potential. Fits all standard size uppers and includes barrel nut for fast and easy installation. Accepts standard barrel nut wrenches and features knurled center section for secure grip. Rifle handguard has 5 longitudinal flutes to save weight, and 10 slots cut in the muzzle end to help improve air flow and help speed cooling. Carbine handguard has 8 longitudinal flutes to save weight. Pistol handguard has no flutes or slots.
Incluye Tuerca del Cañón para una Instalación Rápida
Guardamanos de aluminio mecanizado que se monta en tu AR-15 y deja el cañón libre para aliviar tensión y ayudar a mejorar el potencial de precisión. Se ajusta a todas las partes superiores de tamaño estándar e incluye tuerca del cañón para una instalación rápida y fácil. Acepta llaves estándar para tuerca del cañón y tiene una sección central estriada para un agarre seguro. El guardamanos para rifle tiene 5 ranuras longitudinales para reducir peso y 10 ranuras cortadas en el extremo del cañón para mejorar la circulación del aire y ayudar a acelerar la refrigeración. El guardamanos para carabina tiene 8 ranuras longitudinales para reducir peso. El guardamanos para pistola no tiene ranuras ni cortes.
ESPECIFICACIONES: Aluminio 6064 T6, anodizado duro, acabado mate negro. Diámetro exterior de 2"(5cm), diámetro interior de 1¾"(4.4cm). Incluye tuerca del cañón. Rifle– 12.5" (32cm) de largo, peso de 13.1 oz. (371g). Carabina - 7" (18cm) de largo, peso de 8.1 oz. (229g). Pistola – 4" (10cm) de largo, peso de 5.3 oz.(150g).
Más...
Evaluaciones de clientes para DOUBLE STAR AR15 RIFLE LENGTH HANDGUARD
Número de evaluaciones: 15
De brownells.com: 15
Evaluación media: 4,8
Good quality, priced right.(23/04/2014)
Good fit and finish. Mine was dinged in handling/shipping, but a little foam wrap would have prevented that. I have been using Double Star products for some time now and my customers are very pleased with them. I like these a lot.
Great Price(12/09/2014)
I received this rail in the mail today. It took me about five minutes to take the old barrel nut off my AR pistol and then to install the new nut, align it for the gas tube and screw on the rail. I was pleasantly surprised at the quality and fit finish of this rail.
Quality item.(17/10/2014)
As good if not better than higher priced aluminum free floats. Packaged well and built rigid. Comes with barrel nut. I replaced a Hogue over molded free float with this. Much better set up IMO. I would buy again.
excellent(24/06/2016)
very light. leaves about 3/16" clearance from a standard low pro block. For safety I cleaned the threads with acetone then a touch of loc-tite. It threaded very smooth onto an aero fde upper and onto the included nut. I torqued it to 75 and loosened it a few times to see if the threads would stretch and they didn't noticeably. Final hole alignment was achieved under 75 ft lbs from having a 10% hole at 30. Note FYI I see mechanics on youtube all the time using their torque wrench wrong, if you have a dogbone, crows foot, or spanner wrench connected to your torque wrench it should be at 90 degrees to the wrench NOT Straight out. If necessity dictates it be strait out their is a fairly simple mathematical formula for achieving torque accuracy. My guess is most of the torque wrenches in the world aren't even calibrated though so... Whatever. 2 cents from an aircraft mechanic I guess.
I use this handgaurd for USARMs competitions. Well built, secure grip, and clean looks.
Excellent Value(17/07/2016)
Well machined and easy to install. This was my first free float hand guard I have installed. Great choice for a frills hand guard and the price reflects that. Took 55 ft/lbs of torque to get the gas tube lined up. Rifle was a 16 inch DPMS Carbine.
Great quality (02/09/2016)
Looks good, great quality and value. Simple straight forward installation.
Excellent piece.(15/01/2014)
I used the Double Star hand guard on a varmint build and I'm really impressed with the quality of this hand guard / barrel nut kit. The machining is excellent, finish is perfect and the vent design looks good also. This a very good buy, especially at this price. It looks a lot better than more expensive pieces.
I should say they stink, But...(09/09/2014)
I should say they stink, because I want them in stock when I need them! Very high quality good looking part. Easy to install, worked fine with my DPMS barrel nut wrench. It is made of aluminum but has a very good substantial feel, rock solid. This was the first time using this part, I ordered it for another Officers weapon and I was skeptical, but with Brownells customer service you never get stuck with a bad part...Ever. I will be ordering a few more after this one gets out in the field and passed around, It has a great feel. Its not too big and not too slim, just right. Well heck, the next couple will probably end up on my rifles, Armorer privilege, you know.
Great Product(03/10/2014)
I was worried that this will weigh more than my Carbon Fiber hand guard that it replaced but it was not bad. Rifle length is 12.5 inches and weighed 12.3 oz with barrel nut when my Carbon Fiber weighed 10.8 oz. Overall great purchase.
Exactly what it should be(19/01/2015)
Awesome handguard, fit perfectly between my upper and gas block on my 20" barrel, looks great, very solid construction, no burrs, nice knurling, not too sharp where it hurts your hands and not so subtle where it doesn't help your grip. The finish seems to be really well done but only time will tell that for sure. Will deffinately recommend this to others.
installation and use(12/04/2015)
About as easy to install as anything I ever did. AR tool didn't work, but it screwed right on and centered perfectly with an oil filter wrench . Went to the range with it and it did the job right now with a new barrel that shot very good groups. This is about as easy as it gets!
Good deal(04/10/2015)
Well made and solid. Installed on a 16" AR and it looks great. Very happy with this product
"Rifle length is a little to short"(05/07/2016)
This is a well made part, excellent machining, good checkering, but I had to give it poor quality as it is too short for a full size, 20" barreled AR. The gas block should not show, however; with this handguard it is outside the interior of the handguard and looks weird. All other handguards I have used completely cover the gas block as it should be for protection. I must confess, I did not measure the rifle barrel to be sure it would fit. Should have, it is from Sharps in 25-45. However; it's not their barrel that's the problem as I used a standard AR gas tube. And the website ad for this part did give it's overall length, but when it said "made for a full size rifle" and 20" barrel, I just figured that it would fit correctly. Will probably replace it later but can't send it back, I painted it. Oh well.
Big bang for the buck!(15/06/2018)
If your looking for a good quality hand guard without a lot of bells and whistles this is it...
Installed in 5 minutes. I shoot competition and this is all I need..For the money its well worth it..
N.º de producto: 100012509 DOUBLE STAR AR15 RIFLE LENGTH HANDGUARD Ref Fabricante: AR415841348100249 Guardamanos de aluminio mecanizado que se monta en tu AR-15 y deja el cañón libre para aliviar tensión y ayudar a mejorar el potencial de precisión. Se ajusta a todas las partes superiores de tamaño estándar e incluye tuerca del cañón para una instalación rápida y fácil. Acepta llaves estándar para tuerca del cañón y tiene una sección central estriada para un agarre seguro. El guardamanos para rifle tiene 5 ranuras longitudinales para reducir peso y 10 ranuras cortadas en el extremo del cañón para mejorar la circulación del aire y ayudar a acelerar la refrigeración. El guardamanos para carabina tiene 8 ranuras longitudinales para reducir peso. El guardamanos para pistola no tiene ranuras ni cortes.
Guardamanos de aluminio mecanizado para AR-15 que mejora la precisión al dejar el cañón libre de tensión.
Disponible en tres longitudes: rifle de 12.5" (32cm), carabina de 7" (18cm) y pistola de 4" (10cm), cada uno con diferentes características de ranuras para reducir peso y mejorar la refrigeración.
Fabricado en aluminio 6064 T6 anodizado duro con acabado mate negro, incluye tuerca del cañón para fácil instalación.
Atributos
Color:
Black
Estilo:
Smooth
Hacer:
AR-15
Longitud:
12.5
Material:
Aluminio
Tipo:
Free Float
Peso de entrega: 0,272kgAltura de envío: 30mmAncho de envío: 51mmLongitud de envío: 340mm
UPC
: 841348100249
Detalles del artículo
Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.y.1
Estos artículos están controlados por el gobierno de los EE. UU. Y autorizados para exportar solo al país de destino final para que los utilicen el destinatario final o el / los usuario (s) final (es) aquí identificado (s). No pueden ser revendidos, transferidos ni eliminados de otra manera, para cualquier otro país o a cualquier otra persona que no sea el destinatario final o el (los) usuario (s) final (es) autorizado (s), ya sea en su forma original o después de haber sido incorporados a otros artículos, sin obtener primero la aprobación del Gobierno de los EE. UU. de su ley y regulaciones.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
N.º de producto: 100012511 DOUBLE STAR AR15 CARBINE LENGTH HANDGUARD Ref Fabricante: AR417841348100416 Guardamanos de aluminio mecanizado que se monta en tu AR-15 y deja el cañón libre para aliviar tensión y ayudar a mejorar el potencial de precisión. Se ajusta a todas las partes superiores de tamaño estándar e incluye tuerca del cañón para una instalación rápida y fácil. Acepta llaves estándar para tuerca del cañón y tiene una sección central estriada para un agarre seguro. El guardamanos para rifle tiene 5 ranuras longitudinales para reducir peso y 10 ranuras cortadas en el extremo del cañón para mejorar la circulación del aire y ayudar a acelerar la refrigeración. El guardamanos para carabina tiene 8 ranuras longitudinales para reducir peso. El guardamanos para pistola no tiene ranuras ni cortes.
N.º de producto: 100012510 DOUBLE STAR AR15 PISTOL LENGTH HANDGUARD Ref Fabricante: AR416841348100386 Guardamanos de aluminio mecanizado que se monta en tu AR-15 y deja el cañón libre para aliviar tensión y ayudar a mejorar el potencial de precisión. Se ajusta a todas las partes superiores de tamaño estándar e incluye tuerca del cañón para una instalación rápida y fácil. Acepta llaves estándar para tuerca del cañón y tiene una sección central estriada para un agarre seguro. El guardamanos para rifle tiene 5 ranuras longitudinales para reducir peso y 10 ranuras cortadas en el extremo del cañón para mejorar la circulación del aire y ayudar a acelerar la refrigeración. El guardamanos para carabina tiene 8 ranuras longitudinales para reducir peso. El guardamanos para pistola no tiene ranuras ni cortes.
89.9EUR089,90 €
*
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Machined aluminum handguard mounts onto your AR-15 and free floats the barrel to relieve stress and help enhance accuracy potential. Fits all standard size uppers and includes barrel nut for fast and easy installation. Accepts standard barrel nut wrenches and features knurled center section for secure grip. Rifle handguard has 5 longitudinal flutes to save weight, and 10 slots cut in the muzzle end to help improve air flow and help speed cooling. Carbine handguard has 8 longitudinal flutes to save weight. Pistol handguard has no flutes or slots.
Incluye Tuerca del Cañón para una Instalación Rápida
Guardamanos de aluminio mecanizado que se monta en tu AR-15 y deja el cañón libre para aliviar tensión y ayudar a mejorar el potencial de precisión. Se ajusta a todas las partes superiores de tamaño estándar e incluye tuerca del cañón para una instalación rápida y fácil. Acepta llaves estándar para tuerca del cañón y tiene una sección central estriada para un agarre seguro. El guardamanos para rifle tiene 5 ranuras longitudinales para reducir peso y 10 ranuras cortadas en el extremo del cañón para mejorar la circulación del aire y ayudar a acelerar la refrigeración. El guardamanos para carabina tiene 8 ranuras longitudinales para reducir peso. El guardamanos para pistola no tiene ranuras ni cortes.
ESPECIFICACIONES: Aluminio 6064 T6, anodizado duro, acabado mate negro. Diámetro exterior de 2"(5cm), diámetro interior de 1¾"(4.4cm). Incluye tuerca del cañón. Rifle– 12.5" (32cm) de largo, peso de 13.1 oz. (371g). Carabina - 7" (18cm) de largo, peso de 8.1 oz. (229g). Pistola – 4" (10cm) de largo, peso de 5.3 oz.(150g).
Más...
Evaluaciones de clientes para DOUBLE STAR AR15 RIFLE LENGTH HANDGUARD
Número de evaluaciones: 15
De brownells.com: 15
Evaluación media: 4,8
Good quality, priced right.(23/04/2014)
Good fit and finish. Mine was dinged in handling/shipping, but a little foam wrap would have prevented that. I have been using Double Star products for some time now and my customers are very pleased with them. I like these a lot.
Great Price(12/09/2014)
I received this rail in the mail today. It took me about five minutes to take the old barrel nut off my AR pistol and then to install the new nut, align it for the gas tube and screw on the rail. I was pleasantly surprised at the quality and fit finish of this rail.
Quality item.(17/10/2014)
As good if not better than higher priced aluminum free floats. Packaged well and built rigid. Comes with barrel nut. I replaced a Hogue over molded free float with this. Much better set up IMO. I would buy again.
excellent(24/06/2016)
very light. leaves about 3/16" clearance from a standard low pro block. For safety I cleaned the threads with acetone then a touch of loc-tite. It threaded very smooth onto an aero fde upper and onto the included nut. I torqued it to 75 and loosened it a few times to see if the threads would stretch and they didn't noticeably. Final hole alignment was achieved under 75 ft lbs from having a 10% hole at 30. Note FYI I see mechanics on youtube all the time using their torque wrench wrong, if you have a dogbone, crows foot, or spanner wrench connected to your torque wrench it should be at 90 degrees to the wrench NOT Straight out. If necessity dictates it be strait out their is a fairly simple mathematical formula for achieving torque accuracy. My guess is most of the torque wrenches in the world aren't even calibrated though so... Whatever. 2 cents from an aircraft mechanic I guess.
I use this handgaurd for USARMs competitions. Well built, secure grip, and clean looks.
Excellent Value(17/07/2016)
Well machined and easy to install. This was my first free float hand guard I have installed. Great choice for a frills hand guard and the price reflects that. Took 55 ft/lbs of torque to get the gas tube lined up. Rifle was a 16 inch DPMS Carbine.
Great quality (02/09/2016)
Looks good, great quality and value. Simple straight forward installation.
Excellent piece.(15/01/2014)
I used the Double Star hand guard on a varmint build and I'm really impressed with the quality of this hand guard / barrel nut kit. The machining is excellent, finish is perfect and the vent design looks good also. This a very good buy, especially at this price. It looks a lot better than more expensive pieces.
I should say they stink, But...(09/09/2014)
I should say they stink, because I want them in stock when I need them! Very high quality good looking part. Easy to install, worked fine with my DPMS barrel nut wrench. It is made of aluminum but has a very good substantial feel, rock solid. This was the first time using this part, I ordered it for another Officers weapon and I was skeptical, but with Brownells customer service you never get stuck with a bad part...Ever. I will be ordering a few more after this one gets out in the field and passed around, It has a great feel. Its not too big and not too slim, just right. Well heck, the next couple will probably end up on my rifles, Armorer privilege, you know.
Great Product(03/10/2014)
I was worried that this will weigh more than my Carbon Fiber hand guard that it replaced but it was not bad. Rifle length is 12.5 inches and weighed 12.3 oz with barrel nut when my Carbon Fiber weighed 10.8 oz. Overall great purchase.
Exactly what it should be(19/01/2015)
Awesome handguard, fit perfectly between my upper and gas block on my 20" barrel, looks great, very solid construction, no burrs, nice knurling, not too sharp where it hurts your hands and not so subtle where it doesn't help your grip. The finish seems to be really well done but only time will tell that for sure. Will deffinately recommend this to others.
installation and use(12/04/2015)
About as easy to install as anything I ever did. AR tool didn't work, but it screwed right on and centered perfectly with an oil filter wrench . Went to the range with it and it did the job right now with a new barrel that shot very good groups. This is about as easy as it gets!
Good deal(04/10/2015)
Well made and solid. Installed on a 16" AR and it looks great. Very happy with this product
"Rifle length is a little to short"(05/07/2016)
This is a well made part, excellent machining, good checkering, but I had to give it poor quality as it is too short for a full size, 20" barreled AR. The gas block should not show, however; with this handguard it is outside the interior of the handguard and looks weird. All other handguards I have used completely cover the gas block as it should be for protection. I must confess, I did not measure the rifle barrel to be sure it would fit. Should have, it is from Sharps in 25-45. However; it's not their barrel that's the problem as I used a standard AR gas tube. And the website ad for this part did give it's overall length, but when it said "made for a full size rifle" and 20" barrel, I just figured that it would fit correctly. Will probably replace it later but can't send it back, I painted it. Oh well.
Big bang for the buck!(15/06/2018)
If your looking for a good quality hand guard without a lot of bells and whistles this is it...
Installed in 5 minutes. I shoot competition and this is all I need..For the money its well worth it..