Descripción traducida automaticaménte (Descripción - Fabricante):
Tierra centerless de la precisión y pulidos resortes funcionamiento ofrecen un funcionamiento suave y silencioso en AR tubos de protección. Impulso mejorado siento resulta en una recuperación más rápida Vista y mayor confiabilidad. Más...
Extra Power For Smoother, Quieter, More Reliable Cycling
Precision centerless ground and polished operating springs offer a smoother and quieter operation in AR buffer tubes. Improved impulse feel results in faster sight recovery and improved reliability. Outer-diameter is ground and polished for smooth, quiet movement in the buffer tube. Rifle fits fixed stock rifles with A1/A2 buffer tube. Carbine fits collapsible M4-type carbine-length buffer tube. 308 Rifle – Fits AR10 and 308 AR fixed stock rifles with an A1/A2 buffer tube. 308 Carbine – fits AR10 and 308 AR carbine buffer tubes. JP Enterprises recommends the use of JP Tuned and Polished 308 Buffer Springs when using the JP 308 Low Mass Bolt Carrier Group
Potencia extra para el ciclismo más suave, más silencioso y más confiable
Tierra centerless de la precisión y pulidos resortes funcionamiento ofrecen un funcionamiento suave y silencioso en AR tubos de protección. Impulso mejorado siento resulta en una recuperación más rápida Vista y mayor confiabilidad. Diámetro externo es tierra y pulido para el movimiento suave y silencioso en el tubo de solución tampón. Rifle encaja rifles stock fijos con tubo de solución tampón A1/A2. Carabina encaja con tubo de solución tampón de longitud carabina M4 tipo plegable. Rifle 308 – ajustes AR10 y 308 rifles stock AR fijo con un tubo de solución tampón A1/A2. Carabina 308 – encaja AR10 y 308 carabina AR tubos de búfer. JP Enterprises recomienda el uso de JP Tuned y pulido 308 Buffer resortes cuando se utiliza el portador del cerrojo JP 308 baja masa Group
Evaluaciones de clientes para J P ENTERPRISES TUNED BUFFER SPRING, RIFLE
Número de evaluaciones: 11
De brownells.com: 11
Evaluación media: 4,9
IT WORKS!(28/04/2017)
Built an AR308 with a standard 308 carbine buffer spring in a Magpul CTR stock. Would only lock back the bolt carrier about 50% of the time after the last round. Installed this spring and now get lock back after the last round 100%. Used a standard 3.7oz buffer both times. Problem solved!
308 Rifle Flat-Wire Buffer Spring(22/03/2014)
I replaced the factory round buffer spring in a new Remington R-25, 7MM-08 with this buffer spring because of multiple feeding and extraction problems. I fired 100 rounds, fast and slow, without any malfunctions what-so-ever.
Excellent Product(20/02/2012)
In Canada, we can buy Norinco AR's. Although well built, the finer points are missed. One of those is final fit/finish/quality on some things. Gun worked great, but adding this, smooth consistent cycling, and the brass all went in the same area. It did minimize the buffer tube noise as well.
No more ringing sound at all - amazing(03/04/2012)
Installed this spring with a tiny bit of grease for lubrication, and it works amazing. Just as promised. Gun feels nice and solid when I shoot it, and I don't feel or hear any of the spring action anymore. I ran this with a spikes heavy buffer.
Nice!(18/11/2013)
I've used this spring in multiple carbine builds and a pistol; both in conjunction with standard, H2 and Spike's T2 buffers. Never had any issue with cycling. A top quality upgrade.
Great part(26/03/2015)
Great product, great price. Highly recommended.
Works well, but short life.(16/07/2018)
Very nice part, but low life expectancy. Did not see anything on JP's site or anyone mention on here, but on the card I got with the spring the recommended replacement is only 5,000 rds. I don't consider my self to shoot much, but 5k rds comes quick and was disappointed to see that after I got it. That said it works very comparably to the flat springs I have and have yet to hear any spring noise when firing.
Great Spring(04/04/2012)
I use this spring with the AR-Restor buffer. It has tamed my .50 Beowulf more than I thought possible!
Great buy(04/02/2014)
Excellent spring, takes alot of the "chung" out of the action. The extra power of this spring really drives the bolt home.
These work(31/01/2016)
Have used these springs in my own rifles, installed in customers rifles, never had a complaint. Just ordered a couple more to have them in stock.
Quiet (24/08/2016)
I have liked shooting AR's, but always hated the "boing" and rattle. When I built my own, I decided to eliminate those noises. Between the Spikes Tactical tungsten buffer and a JP Enterprises tuned spring, the only mechanical noise is from the bolt movement. Pure joy!
452000118 J P ENTERPRISES TUNED BUFFER SPRING, RIFLE Ref Fabricante: JPSOSR812872020907 Tierra centerless de la precisión y pulidos resortes funcionamiento ofrecen un funcionamiento suave y silencioso en AR tubos de protección. Impulso mejorado siento resulta en una recuperación más rápida Vista y mayor confiabilidad. Diámetro externo es tierra y pulido para el movimiento suave y silencioso en el tubo de solución tampón. Rifle encaja rifles stock fijos con tubo de solución tampón A1/A2. Carabina encaja con tubo de solución tampón de longitud carabina M4 tipo plegable. Rifle 308 – ajustes AR10 y 308 rifles stock AR fijo con un tubo de solución tampón A1/A2. Carabina 308 – encaja AR10 y 308 carabina AR tubos de búfer. JP Enterprises recomienda el uso de JP Tuned y pulido 308 Buffer resortes cuando se utiliza el portador del cerrojo JP 308 baja masa Group
452000119 J P ENTERPRISES TUNED BUFFER SPRING, CARBINE Ref Fabricante: JPSOSC812872020921 Tierra centerless de la precisión y pulidos resortes funcionamiento ofrecen un funcionamiento suave y silencioso en AR tubos de protección. Impulso mejorado siento resulta en una recuperación más rápida Vista y mayor confiabilidad. Diámetro externo es tierra y pulido para el movimiento suave y silencioso en el tubo de solución tampón. Rifle encaja rifles stock fijos con tubo de solución tampón A1/A2. Carabina encaja con tubo de solución tampón de longitud carabina M4 tipo plegable. Rifle 308 – ajustes AR10 y 308 rifles stock AR fijo con un tubo de solución tampón A1/A2. Carabina 308 – encaja AR10 y 308 carabina AR tubos de búfer. JP Enterprises recomienda el uso de JP Tuned y pulido 308 Buffer resortes cuando se utiliza el portador del cerrojo JP 308 baja masa Group
452000151 J P ENTERPRISES TUNED AND POLISHED BUFFER SPRING, 308 RIFLE Ref Fabricante: JPSOSR308812872020914 Tierra centerless de la precisión y pulidos resortes funcionamiento ofrecen un funcionamiento suave y silencioso en AR tubos de protección. Impulso mejorado siento resulta en una recuperación más rápida Vista y mayor confiabilidad. Diámetro externo es tierra y pulido para el movimiento suave y silencioso en el tubo de solución tampón. Rifle encaja rifles stock fijos con tubo de solución tampón A1/A2. Carabina encaja con tubo de solución tampón de longitud carabina M4 tipo plegable. Rifle 308 – ajustes AR10 y 308 rifles stock AR fijo con un tubo de solución tampón A1/A2. Carabina 308 – encaja AR10 y 308 carabina AR tubos de búfer. JP Enterprises recomienda el uso de JP Tuned y pulido 308 Buffer resortes cuando se utiliza el portador del cerrojo JP 308 baja masa Group
452000152 J P ENTERPRISES TUNED AND POLISHED BUFFER SPRING, 308 CARBINE Ref Fabricante: JPSOSC308812872020938 Tierra centerless de la precisión y pulidos resortes funcionamiento ofrecen un funcionamiento suave y silencioso en AR tubos de protección. Impulso mejorado siento resulta en una recuperación más rápida Vista y mayor confiabilidad. Diámetro externo es tierra y pulido para el movimiento suave y silencioso en el tubo de solución tampón. Rifle encaja rifles stock fijos con tubo de solución tampón A1/A2. Carabina encaja con tubo de solución tampón de longitud carabina M4 tipo plegable. Rifle 308 – ajustes AR10 y 308 rifles stock AR fijo con un tubo de solución tampón A1/A2. Carabina 308 – encaja AR10 y 308 carabina AR tubos de búfer. JP Enterprises recomienda el uso de JP Tuned y pulido 308 Buffer resortes cuando se utiliza el portador del cerrojo JP 308 baja masa Group
Extra Power For Smoother, Quieter, More Reliable Cycling
Precision centerless ground and polished operating springs offer a smoother and quieter operation in AR buffer tubes. Improved impulse feel results in faster sight recovery and improved reliability. Outer-diameter is ground and polished for smooth, quiet movement in the buffer tube. Rifle fits fixed stock rifles with A1/A2 buffer tube. Carbine fits collapsible M4-type carbine-length buffer tube. 308 Rifle – Fits AR10 and 308 AR fixed stock rifles with an A1/A2 buffer tube. 308 Carbine – fits AR10 and 308 AR carbine buffer tubes. JP Enterprises recommends the use of JP Tuned and Polished 308 Buffer Springs when using the JP 308 Low Mass Bolt Carrier Group
Potencia extra para el ciclismo más suave, más silencioso y más confiable
Tierra centerless de la precisión y pulidos resortes funcionamiento ofrecen un funcionamiento suave y silencioso en AR tubos de protección. Impulso mejorado siento resulta en una recuperación más rápida Vista y mayor confiabilidad. Diámetro externo es tierra y pulido para el movimiento suave y silencioso en el tubo de solución tampón. Rifle encaja rifles stock fijos con tubo de solución tampón A1/A2. Carabina encaja con tubo de solución tampón de longitud carabina M4 tipo plegable. Rifle 308 – ajustes AR10 y 308 rifles stock AR fijo con un tubo de solución tampón A1/A2. Carabina 308 – encaja AR10 y 308 carabina AR tubos de búfer. JP Enterprises recomienda el uso de JP Tuned y pulido 308 Buffer resortes cuando se utiliza el portador del cerrojo JP 308 baja masa Group
Evaluaciones de clientes para J P ENTERPRISES TUNED BUFFER SPRING, RIFLE
Número de evaluaciones: 11
De brownells.com: 11
Evaluación media: 4,9
IT WORKS!(28/04/2017)
Built an AR308 with a standard 308 carbine buffer spring in a Magpul CTR stock. Would only lock back the bolt carrier about 50% of the time after the last round. Installed this spring and now get lock back after the last round 100%. Used a standard 3.7oz buffer both times. Problem solved!
308 Rifle Flat-Wire Buffer Spring(22/03/2014)
I replaced the factory round buffer spring in a new Remington R-25, 7MM-08 with this buffer spring because of multiple feeding and extraction problems. I fired 100 rounds, fast and slow, without any malfunctions what-so-ever.
Excellent Product(20/02/2012)
In Canada, we can buy Norinco AR's. Although well built, the finer points are missed. One of those is final fit/finish/quality on some things. Gun worked great, but adding this, smooth consistent cycling, and the brass all went in the same area. It did minimize the buffer tube noise as well.
No more ringing sound at all - amazing(03/04/2012)
Installed this spring with a tiny bit of grease for lubrication, and it works amazing. Just as promised. Gun feels nice and solid when I shoot it, and I don't feel or hear any of the spring action anymore. I ran this with a spikes heavy buffer.
Nice!(18/11/2013)
I've used this spring in multiple carbine builds and a pistol; both in conjunction with standard, H2 and Spike's T2 buffers. Never had any issue with cycling. A top quality upgrade.
Great part(26/03/2015)
Great product, great price. Highly recommended.
Works well, but short life.(16/07/2018)
Very nice part, but low life expectancy. Did not see anything on JP's site or anyone mention on here, but on the card I got with the spring the recommended replacement is only 5,000 rds. I don't consider my self to shoot much, but 5k rds comes quick and was disappointed to see that after I got it. That said it works very comparably to the flat springs I have and have yet to hear any spring noise when firing.
Great Spring(04/04/2012)
I use this spring with the AR-Restor buffer. It has tamed my .50 Beowulf more than I thought possible!
Great buy(04/02/2014)
Excellent spring, takes alot of the "chung" out of the action. The extra power of this spring really drives the bolt home.
These work(31/01/2016)
Have used these springs in my own rifles, installed in customers rifles, never had a complaint. Just ordered a couple more to have them in stock.
Quiet (24/08/2016)
I have liked shooting AR's, but always hated the "boing" and rattle. When I built my own, I decided to eliminate those noises. Between the Spikes Tactical tungsten buffer and a JP Enterprises tuned spring, the only mechanical noise is from the bolt movement. Pure joy!
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.