Brownells Iberica - El mayor proveedor de accesorios para el Tiro, Piezas y herramientas del armero. España

ERATAC
BACKUP FRONT AND REAR SIGHTS FOR HECKLER AND KOCH RIFLE

430105673
The ERATAC® backup-sight has been developed to offer a rugged and robust sight to withstand roughest conditions while offering at the same time the precision of a competition shooting sight. The combination of steel parts where absolutely essential and high grade aluminum parts wherever sufficient, gave us the possibility to implement a sight with minimalistic design, low weight and minimum height. Thanks to a special surface treatment all parts are corrosion resistant to withstand even maritime conditions. The spring-loaded folding mechanism reliantly protects the sight from damage when used under rough condition in the field. A backup-sight must enable the shooter to aim the gun quickly and intuitively especially when acting under stress. Eratac, therefore, designed the ERATAC® backup-sight in a way that the small and large ghost ring is same plane. It is not necessary to change the point of aim when the distance to the target remains unaltered. The height of this sight corresponds to the height of an AR15 standard sight and can be easily combined with products from other manufacturers. The front sight is available in two different versions. Eratac recommend to use the wide post (1.8 mm / 0.07”) for military purposes. When using the sight for competition shooting the smaller version with a 1.35 mm / 0.05” wide sight insert is recommended. No tool is necessary to alter the height of the front sight. The ERATAC® backup-sight is suitable for all AR15 front sights having an 8-36 UNF thread. Because of this, a large variety of after market front sights may be used. The ERATAC® backup-sight with its very low height of only 9 mm / 0.35” also facilitates the use of extremely low mounted optics. Heckler and Koch Style: Back-up sight, kit includes front-sight with 1.8 mm / 0.07“ wide post and rear-sight.
429.9 499.9 2 EUR
N.º de producto: 430105673
ERATAC BACKUP FRONT & REAR SIGHT FOR HK TYPE RIFLES W/PICATINNY
Ref Fabricante: T0540-2355 La mira de respaldo ERATAC® ha sido desarrollada para ofrecer una mira resistente y robusta capaz de soportar las condiciones más duras, al mismo tiempo que proporciona la precisión de una mira de tiro de competición. La combinación de piezas de acero donde es absolutamente esencial y piezas de aluminio de alta calidad donde es suficiente, nos ha permitido implementar una mira de diseño minimalista, bajo peso y altura mínima. Gracias a un tratamiento superficial especial, todas las partes son resistentes a la corrosión para soportar incluso condiciones marítimas. El mecanismo plegable con resorte protege de manera confiable la mira de daños cuando se usa bajo condiciones difíciles en el campo. Una mira de respaldo debe permitir al tirador apuntar el arma rápidamente e intuitivamente, especialmente cuando actúa bajo estrés. Por ello, Eratac diseñó la mira de respaldo ERATAC® de tal manera que el anillo fantasma pequeño y grande esté en el mismo plano. No es necesario cambiar el punto de mira cuando la distancia al objetivo permanece inalterada. La altura de esta mira corresponde a la altura de una mira estándar AR15 y se puede combinar fácilmente con productos de otros fabricantes. La mira delantera está disponible en dos versiones diferentes. Eratac recomienda usar el poste ancho (1.8 mm / 0.07”) para fines militares. Cuando se usa la mira para tiro de competición, se recomienda la versión más pequeña con un inserto de mira de 1.35 mm / 0.05” de ancho. No se necesita ninguna herramienta para alterar la altura de la mira delantera. La mira de respaldo ERATAC® es adecuada para todas las miras delanteras AR15 que tienen un roscado 8-36 UNF. Debido a esto, se puede utilizar una gran variedad de miras delanteras del mercado de accesorios. La mira de respaldo ERATAC® con su altura muy baja de solo 9 mm / 0.35” también facilita el uso de ópticas montadas extremadamente bajas. Estilo Heckler and Koch: Mira de respaldo, el kit incluye mira delantera con poste de 1.8 mm / 0.07“ de ancho y mira trasera.
429.9 EUR 3 429,90 € *
Plazo de entrega de aproximadamente 6-10 días.
3 pcs. en el almacén de Europa
Caracteristicas: Color: Black Estilo: Ghost Ring Hacer: Heckler & Koch Modelo: MR556

Atributos

Color: Black Estilo: Ghost Ring Hacer: Heckler & Koch Modelo: MR556 Peso de entrega: 0,141kg Altura de envío: 93mm Ancho de envío: 80mm Longitud de envío: 55mm




N.º de producto: 430105674
ERATAC BACKUP OFFSET FRONT/ REAR SIGHT FOR HK TYPE RIFLES PICATINNY
Ref Fabricante: T0540-3355 La mira de respaldo ERATAC® ha sido desarrollada para ofrecer una mira resistente y robusta capaz de soportar las condiciones más duras, al mismo tiempo que proporciona la precisión de una mira de tiro de competición. La combinación de piezas de acero donde es absolutamente esencial y piezas de aluminio de alta calidad donde es suficiente, nos ha permitido implementar una mira de diseño minimalista, bajo peso y altura mínima. Gracias a un tratamiento superficial especial, todas las partes son resistentes a la corrosión para soportar incluso condiciones marítimas. El mecanismo plegable con resorte protege de manera confiable la mira de daños cuando se usa bajo condiciones difíciles en el campo. Una mira de respaldo debe permitir al tirador apuntar el arma rápidamente e intuitivamente, especialmente cuando actúa bajo estrés. Por ello, Eratac diseñó la mira de respaldo ERATAC® de tal manera que el anillo fantasma pequeño y grande esté en el mismo plano. No es necesario cambiar el punto de mira cuando la distancia al objetivo permanece inalterada. La altura de esta mira corresponde a la altura de una mira estándar AR15 y se puede combinar fácilmente con productos de otros fabricantes. La mira delantera está disponible en dos versiones diferentes. Eratac recomienda usar el poste ancho (1.8 mm / 0.07”) para fines militares. Cuando se usa la mira para tiro de competición, se recomienda la versión más pequeña con un inserto de mira de 1.35 mm / 0.05” de ancho. No se necesita ninguna herramienta para alterar la altura de la mira delantera. La mira de respaldo ERATAC® es adecuada para todas las miras delanteras AR15 que tienen un roscado 8-36 UNF. Debido a esto, se puede utilizar una gran variedad de miras delanteras del mercado de accesorios. La mira de respaldo ERATAC® con su altura muy baja de solo 9 mm / 0.35” también facilita el uso de ópticas montadas extremadamente bajas. Estilo Heckler and Koch: Mira de respaldo, el kit incluye mira delantera con poste de 1.8 mm / 0.07“ de ancho y mira trasera.
499.9 EUR 5 499,90 € *
Plazo de entrega de aproximadamente 6-10 días.
1 pcs. en el almacén de Europa
Caracteristicas: Color: Black Estilo: Offset Hacer: Heckler & Koch Modelo: MR556
The ERATAC® backup-sight has been developed to offer a rugged and robust sight to withstand roughest conditions while offering at the same time the precision of a competition shooting sight. The combination of steel parts where absolutely essential and high grade aluminum parts wherever sufficient, gave us the possibility to implement a sight with minimalistic design, low weight and minimum height. Thanks to a special surface treatment all parts are corrosion resistant to withstand even maritime conditions. The spring-loaded folding mechanism reliantly protects the sight from damage when used under rough condition in the field. A backup-sight must enable the shooter to aim the gun quickly and intuitively especially when acting under stress. Eratac, therefore, designed the ERATAC® backup-sight in a way that the small and large ghost ring is same plane. It is not necessary to change the point of aim when the distance to the target remains unaltered. The height of this sight corresponds to the height of an AR15 standard sight and can be easily combined with products from other manufacturers. The front sight is available in two different versions. Eratac recommend to use the wide post (1.8 mm / 0.07”) for military purposes. When using the sight for competition shooting the smaller version with a 1.35 mm / 0.05” wide sight insert is recommended. No tool is necessary to alter the height of the front sight. The ERATAC® backup-sight is suitable for all AR15 front sights having an 8-36 UNF thread. Because of this, a large variety of after market front sights may be used. The ERATAC® backup-sight with its very low height of only 9 mm / 0.35” also facilitates the use of extremely low mounted optics. Heckler and Koch Style: Back-up sight, kit includes front-sight with 1.8 mm / 0.07“ wide post and rear-sight.
Newsletters