Makes uniform, precise fitting of an oversized bushing or cone style compensator fast and simple. Two-piece mandrel threads together with the bushing/comp in between. Flat seat locates front of bushing; tapered, hardened "nose" automatically centers the rear. Mount in the lathe or drill press and file or turn O.D. as needed.
SPECS: Machined steel. 11/16" (17.4mm) diameter. Approximately 4" (10.2cm) long. Comes complete with "A" rod for bushing, "B" rod for cone style comps. Instructions included.
Más...
Sujeta y Centra para Torneado del D.E.
Facilita el ajuste uniforme y preciso de un bushing sobredimensionado o compensador estilo cono de manera rápida y sencilla. El mandril de dos piezas se enrosca uniendo el bushing/compensador en medio. El asiento plano ubica la parte frontal del bushing; la punta cónica y endurecida centra automáticamente la parte trasera. Montar en el torno o taladro de columna y limar o tornear el diámetro exterior según sea necesario.
ESPECIFICACIONES: Acero mecanizado. Diámetro de 11/16" (17.4mm). Aproximadamente 4" (10.2cm) de largo. Incluye varilla "A" para bushing, varilla "B" para compensadores tipo cono. Instrucciones incluidas.
Más...
Evaluaciones de clientes para BROWNELLS BUSHING/COMPENSATOR B ROD
Número de evaluaciones: 2
De brownells.com: 2
Evaluación media: 5
Excellent, well made product(24/02/2010)
This product in instrumnetal in fitting barrel bushings, and compensators on 1911 pistols. It is so easy to just screw your bushihg in between the little cones, chuck the thing up in the lathe and youre good to go. Awesome product that makes life a little easier. Came with standard Brownells Directions but were a little strange for this one with very little information about how to use this particular product. It was a sheet made for many products with a small section about this one.
Recommended to fit match grade bushing(22/12/2011)
I followed the directions and worked slowly. Made fitting the match bushing to the frame much easier. I used this product with the "B" Reamer to to fit the bushing to the barrel. Together they made fitting a 1911 match grade bushing much easier.
N.º de producto: 080804101 BROWNELLS BUSHING/COMPENSATOR B ROD Facilita el ajuste uniforme y preciso de un bushing sobredimensionado o compensador estilo cono de manera rápida y sencilla. El mandril de dos piezas se enrosca uniendo el bushing/compensador en medio. El asiento plano ubica la parte frontal del bushing; la punta cónica y endurecida centra automáticamente la parte trasera. Montar en el torno o taladro de columna y limar o tornear el diámetro exterior según sea necesario.
25.9EUR025,90 €
*
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Hacer:
1911
Peso de entrega: 0,036kgAltura de envío: 10mmAncho de envío: 91mmLongitud de envío: 155mm
Detalles del artículo
Hecho en USA
N.º de producto: 080804100 BROWNELLS BUSHING/COMPENSATOR FITTING MANDREL Facilita el ajuste uniforme y preciso de un bushing sobredimensionado o compensador estilo cono de manera rápida y sencilla. El mandril de dos piezas se enrosca uniendo el bushing/compensador en medio. El asiento plano ubica la parte frontal del bushing; la punta cónica y endurecida centra automáticamente la parte trasera. Montar en el torno o taladro de columna y limar o tornear el diámetro exterior según sea necesario.
79.9EUR079,90 €
*
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Makes uniform, precise fitting of an oversized bushing or cone style compensator fast and simple. Two-piece mandrel threads together with the bushing/comp in between. Flat seat locates front of bushing; tapered, hardened "nose" automatically centers the rear. Mount in the lathe or drill press and file or turn O.D. as needed.
SPECS: Machined steel. 11/16" (17.4mm) diameter. Approximately 4" (10.2cm) long. Comes complete with "A" rod for bushing, "B" rod for cone style comps. Instructions included.
Más...
Sujeta y Centra para Torneado del D.E.
Facilita el ajuste uniforme y preciso de un bushing sobredimensionado o compensador estilo cono de manera rápida y sencilla. El mandril de dos piezas se enrosca uniendo el bushing/compensador en medio. El asiento plano ubica la parte frontal del bushing; la punta cónica y endurecida centra automáticamente la parte trasera. Montar en el torno o taladro de columna y limar o tornear el diámetro exterior según sea necesario.
ESPECIFICACIONES: Acero mecanizado. Diámetro de 11/16" (17.4mm). Aproximadamente 4" (10.2cm) de largo. Incluye varilla "A" para bushing, varilla "B" para compensadores tipo cono. Instrucciones incluidas.
Más...
Evaluaciones de clientes para BROWNELLS BUSHING/COMPENSATOR B ROD
Número de evaluaciones: 2
De brownells.com: 2
Evaluación media: 5
Excellent, well made product(24/02/2010)
This product in instrumnetal in fitting barrel bushings, and compensators on 1911 pistols. It is so easy to just screw your bushihg in between the little cones, chuck the thing up in the lathe and youre good to go. Awesome product that makes life a little easier. Came with standard Brownells Directions but were a little strange for this one with very little information about how to use this particular product. It was a sheet made for many products with a small section about this one.
Recommended to fit match grade bushing(22/12/2011)
I followed the directions and worked slowly. Made fitting the match bushing to the frame much easier. I used this product with the "B" Reamer to to fit the bushing to the barrel. Together they made fitting a 1911 match grade bushing much easier.
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.