Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
¡Mejora tu puntería con el montaje COLT GOLD CUP TRIJICON RMR!
El montaje COLT GOLD CUP TRIJICON RMR de EGW es la solución perfecta para añadir una mira red dot a tu pistola. Diseñado para un ajuste preciso y fácil instalación, este montaje es ideal para los tiradores que buscan mejorar su rendimiento.
Descripción del producto
- Material: Aluminio 7075
- Recubrimiento: Mate negro duro
- Longitud total: 1.780"
- Anchura total: 1.1"
- Hardware de montaje: (2) Tornillos de cabeza plana 6-32, (1) Tornillo de fijación 6-32 x 3/16
- Ajuste para punto rojo: Trijicon RMR, Holosun HS507C
Compatibilidad
Este montaje es compatible con:
- Baby Desert Eagle (Post 2006)
- EAA Witness Elite Match
No es compatible con: Rock Island 1911s
Instrucciones de instalación
- Retira la mira trasera de tu arma.
- Instala el montaje EGW en la rampa de la mira.
- Ajusta el tornillo de fijación (si es aplicable).
- Coloca la mira red dot en el montaje EGW (colocar un pequeño trozo de papel entre la mira red dot y el montaje facilitará su extracción y evitará que el Loctite se adhiera a la mira).
- Aplica Loctite azul a los tornillos de montaje proporcionados.
- Ajusta los tornillos de montaje a 15in/lbs.
Nota: Los tornillos incluidos requieren una llave allen de 5/64'' para su instalación.
¡No esperes más para optimizar tu equipo de tiro! Adquiere el montaje COLT GOLD CUP TRIJICON RMR de EGW en Brownells Iberica.