Brownells Iberica - El mayor proveedor de accesorios para el Tiro, Piezas y herramientas del armero. España

EGW
CZ SHADOW 2 TRIJICON RMR SIGHT MOUNT

841370116416 296000591
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
79.9 79.9 1 EUR
New
N.º de producto: 296000591
EGW CZ SHADOW 2 TRIJICON RMR SIGHT MOUNT
Ref Fabricante: 49532 841370116416 Material: Aluminio 7075 Recubrimiento: Anodizado negro mate Longitud total: 1.780" Ancho total: 1.1" Herrajes de montaje: (2) Tornillos de cabeza plana 6-32, (1) Tornillo de ajuste 6-32 X 3/16 Ajuste del punto rojo: Trijicon RMR, Holosun HS507C Esta montura es compatible con: Desert Eagle (Post 2006) EAA Witness Elite Match Esta montura no es compatible con: Rock Island 1911s Simplemente retira la mira trasera de tu arma y reemplázala con nuestra montura para instalar tu mira de punto rojo Trijicon RMR. No se requieren alteraciones. Puedes quitar nuestra montura y volver a colocar tu mira trasera en cualquier momento. Herrajes de montaje incluidos. Instrucciones de instalación Retira la mira trasera* Instala la Montura de Mira EGW en la cola de milano Aprieta el tornillo de ajuste (si aplica) Coloca la mira de punto rojo sobre la Montura de Mira EGW (colocar un pequeño trozo de papel entre la mira de punto rojo y la montura facilitará la extracción y evitará que el Loctite toque la mira de punto rojo) Aplica Loctite azul a los tornillos de montaje proporcionados Aprieta los tornillos de montaje a 15in/lbs 2 Tornillos de Cabeza Plana - Proporcionados para Trijicon RMR Los tornillos que se incluyen con esta montura requieren una llave allen de 5/64'' para la instalación.
79.9 EUR 1 79,90 € *
Plazo de entrega de aproximadamente 14-21 días.
1 pcs. en el almacén de EE.UU.
Caracteristicas: Color: Black Estilo: Tactical Hacer: CZ Material: Aluminio Modelo: 75, Shadow, Shadow 2, SP-01 Shadow Numero de bases: 1-Piece

Atributos

Color: Black Estilo: Tactical Hacer: CZ Material: Aluminio Modelo: 75,Shadow,Shadow 2,SP-01 Shadow Numero de bases: 1-Piece Peso de entrega: 0,035kg Altura de envío: 25mm Ancho de envío: 89mm Longitud de envío: 140mm

Detalles del artículo

Hecho en USA



Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
Newsletters