Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs This mount does not fit: FN FNP (the slide radius is too large to allow this mount to fit) FN 5.7 Any Optics Ready Pistol
Mejora tu puntería con el soporte EGW para el DeltaPoint Pro.
Simplemente quita la mira trasera de tu arma y reemplázala con el soporte EGW para montar tu Leupold DeltaPoint Pro, JPoint, Redfield Accelerator o cualquier mira de punto rojo Optima. Puedes quitar el soporte y volver a colocar tu mira trasera en cualquier momento. Hardware de montaje incluido.
Instrucciones de instalación
- Quita la mira trasera*
- Instala el soporte EGW en el riel de la mira
- Ajusta el tornillo de fijación (si aplica)
- Coloca la mira de punto rojo en el soporte EGW (colocar un pequeño trozo de papel entre la mira de punto rojo y el soporte facilitará la extracción y evitará que el Loctite se adhiera a la mira de punto rojo).
- Aplica Loctite azul a los tornillos de montaje proporcionados
- Ajusta los tornillos de montaje a 15 in/lbs
Este soporte no es compatible con:
- FN FNP (el radio de la corredera es demasiado grande para permitir que este soporte encaje)
- FN 5.7
- Cualquier pistola lista para ópticas