It takes only a few minutes to replace the dust cover with this solid aluminum mount. Clamps to frame with internal steel rails; provides a rock solid base for mounting even the largest scopes. Picatinny-style rail provides optimum mounting flexibility for scopes or electronic sights. Fits inch- and metric-pattern receivers.
SPECS: Aluminum, matte black finish. Accepts Weaver-style rings. 8.5" (21.5cm) long. 11 oz. (313g) weight.
Más...
Sin necesidad de armero, base resistente para visores ópticos
Solo toma unos minutos reemplazar la tapa del mecanismo con esta montura sólida de aluminio. Se sujeta al marco con rieles internos de acero; proporciona una base muy sólida para montar incluso los visores más grandes. La raíl estilo Picatinny ofrece máxima flexibilidad de montaje para visores o miras electrónicas. Apto para receptores de patrones en pulgadas y métricos.
ESPECIFICACIONES: Aluminio, acabado mate negro. Acepta anillos estilo Weaver. 8.5" (21.5cm) de largo. Peso de 11 oz. (313g).
Más...
Evaluaciones de clientes para D.S. ARMS SA-58 SCOPE MOUNT
Número de evaluaciones: 2
De brownells.com: 2
Evaluación media: 4,5
By far the best(04/04/2011)
This mount differs from both the UTG and ARMS mounts in that it is fastened using inserts that pinch the receiver rather than forcing the rail out against the receiver. I have personally used all 3 (UTG, ARMS & DSA) and the DSA is the only rail that maintains its rigidity. The other 2 are limited by their clamping force being applied in only one direction and showed a vertical variance of up to 15 minutes. I would trust even the crude iron sights of the FAL over either the UTG or ARMS rails. The DSA rail however, is rock solid and in my opinion, the only suitable aftermarket FAL mount available.
Good mount but didn't fit(10/11/2014)
I won't give it 5 stars because it doesn't fit my rifle, but construction and quality is outstanding. My rifle is a Century Arms R1-A1 which I've been told is an inch gun. I had no trouble getting the mount to go on, but, the bolt binds on the clips that hold it on. Tried every thing I could think of to get it to work, and every installation sequence, too. No success. Really wish this great mount would work, as it's very well built.
N.º de producto: 274100058 D.S. ARMS SA-58 SCOPE MOUNT Ref Fabricante: 620A Solo toma unos minutos reemplazar la tapa del mecanismo con esta montura sólida de aluminio. Se sujeta al marco con rieles internos de acero; proporciona una base muy sólida para montar incluso los visores más grandes. La raíl estilo Picatinny ofrece máxima flexibilidad de montaje para visores o miras electrónicas. Apto para receptores de patrones en pulgadas y métricos.
139.9EUR0139,90 €
*
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Caracteristicas:Color: BlackEstilo: Tactical BasesHacer: Universal RiflesMaterial: AluminioNumero de bases: 1-Piece
Color:
Black
Estilo:
Tactical Bases
Hacer:
Universal Rifles
Material:
Aluminio
Numero de bases:
1-Piece
Peso de entrega: 0,363kgAltura de envío: 23mmAncho de envío: 41mmLongitud de envío: 287mm
It takes only a few minutes to replace the dust cover with this solid aluminum mount. Clamps to frame with internal steel rails; provides a rock solid base for mounting even the largest scopes. Picatinny-style rail provides optimum mounting flexibility for scopes or electronic sights. Fits inch- and metric-pattern receivers.
SPECS: Aluminum, matte black finish. Accepts Weaver-style rings. 8.5" (21.5cm) long. 11 oz. (313g) weight.
Más...
Sin necesidad de armero, base resistente para visores ópticos
Solo toma unos minutos reemplazar la tapa del mecanismo con esta montura sólida de aluminio. Se sujeta al marco con rieles internos de acero; proporciona una base muy sólida para montar incluso los visores más grandes. La raíl estilo Picatinny ofrece máxima flexibilidad de montaje para visores o miras electrónicas. Apto para receptores de patrones en pulgadas y métricos.
ESPECIFICACIONES: Aluminio, acabado mate negro. Acepta anillos estilo Weaver. 8.5" (21.5cm) de largo. Peso de 11 oz. (313g).
Más...
Evaluaciones de clientes para D.S. ARMS SA-58 SCOPE MOUNT
Número de evaluaciones: 2
De brownells.com: 2
Evaluación media: 4,5
By far the best(04/04/2011)
This mount differs from both the UTG and ARMS mounts in that it is fastened using inserts that pinch the receiver rather than forcing the rail out against the receiver. I have personally used all 3 (UTG, ARMS & DSA) and the DSA is the only rail that maintains its rigidity. The other 2 are limited by their clamping force being applied in only one direction and showed a vertical variance of up to 15 minutes. I would trust even the crude iron sights of the FAL over either the UTG or ARMS rails. The DSA rail however, is rock solid and in my opinion, the only suitable aftermarket FAL mount available.
Good mount but didn't fit(10/11/2014)
I won't give it 5 stars because it doesn't fit my rifle, but construction and quality is outstanding. My rifle is a Century Arms R1-A1 which I've been told is an inch gun. I had no trouble getting the mount to go on, but, the bolt binds on the clips that hold it on. Tried every thing I could think of to get it to work, and every installation sequence, too. No success. Really wish this great mount would work, as it's very well built.
Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.