GBRS GROUP ASSAULTER BELT SYSTEM V3 The GBRS Group Assaulter Belt utilizes a 2-belt system to create a lightweight, flexible yet rigid and stable platform to attach equipment, holsters, and accessories. This is done by using Type 13, 1-23/32” belt webbing (7000 lbs tensile strength) as the base, with a field of PALS webbing, laser cut from a semi-rigid woven thermo-polymer (patent pending). This ensures that your equipment is always secured to something rigid while allowing the belt to remain lightweight and comfortable. To round it off, we double “W” stitch the webbing to a load-rated, 1.75” AustriAlpin Cobra buckle with a D-ring for attaching helo lanyards and other equipment. The outer belt has an inner facing of “loop” style Velcro, to attach to a low profile “hook” inner belt. We did this because hooks should never be worn towards the body, especially in such a high-wear area (belt line). The inner belt system consists of a low profile “hook” inner belt with a single layer of 1.5” scuba webbing. This results in a system that doubles as a non-metallic EDC belt and is a comfortable and convenient way to cover the abrasive hook portion of the inner belt when flipped inside out. The single layer of scuba webbing allows for a rigid surface for IWB holsters to secure firmly. SPECS Outer Belt ONE-WRAP® ¾” Loop 1” & 1.5” Binding ¾” Tegris 12 Layer AustriAlpin D-Ring COBRA® ProStyle Buckle 1.75” 18kN* Webbing Type 13, 1-23/32” Inner Belt 3610 Low Profile Loop 1.5” HTH Extruded Hook 841 1.5” Scuba Webbing 1.5” Weight: Inner and Outer Belt Total Small: 12.9 oz. Medium: 13.8 oz. Large: 14.7 oz. X-Large: 16.8 oz. *BUCKLE DISCLAIMER: The Registration, Evaluation, Authorization, and Restriction of Chemicals (REACH Regulation) protects the environment against the harmful effects of chemical substances. 2023 changes to this regulation may or may not have visually affected the buckle on our V3 belt. This minimal visual difference does not affect the functionality of the belt. COMPATIBILITY: All MOLLE weave pouches/ products Holsters with belt loops (EX: Safariland® 6075UBL) True North Modular Holster Adapters SIZING: **Measure your waistline circumference for correct measurements, do not use pants size*** Size S fits waist sizes 27”-32” Ideal fit 27”-31” 17 MOLLE spaces Size M fits waist sizes 31”-36 “ Ideal fit 31”-34” 20 MOLLE spaces Size L fits waist sizes 35”-41” Ideal fit 35”-39” 23 MOLLE spaces Size XL fits waist sizes 40”-50” Ideal fit 40”-46” 26 MOLLE spaces
¡Descubre el sistema de cinturón Assaulter V3 de GBRS GROUP!
El Sistema de Cinturón Assaulter V3 de GBRS GROUP utiliza un sistema de dos cinturones para crear una plataforma ligera, flexible, pero rígida y estable para adjuntar equipo, fundas y accesorios. Esto se logra utilizando una cinta de cinturón de tipo 13, de 1-23/32” (con una resistencia a la tracción de 7000 lbs) como base, con un campo de cinta PALS, cortada con láser de un termo-polímero tejido semi-rígido (patente pendiente). Esto asegura que tu equipo esté siempre asegurado a algo rígido, mientras permite que el cinturón se mantenga ligero y cómodo.
Para completar el diseño, utilizamos un doble “W” en la costura de la cinta a una hebilla AustriAlpin Cobra de 1.75” con un anillo en D para sujetar lanyards de helicóptero y otro equipo. El cinturón exterior tiene un lado interior de Velcro de estilo “loop”, para acoplarse a un cinturón interior “hook” de perfil bajo. Hicimos esto porque los ganchos nunca deben llevarse hacia el cuerpo, especialmente en un área de alto desgaste (línea del cinturón).
Detalles del sistema de cinturón interior
El sistema de cinturón interior consiste en un cinturón interior “hook” de perfil bajo con una sola capa de cinta de buceo de 1.5”. Esto resulta en un sistema que también funciona como un cinturón EDC no metálico y es una forma cómoda y conveniente de cubrir la parte abrasiva del gancho del cinturón interior cuando se da vuelta. La capa única de cinta de buceo permite una superficie rígida para que las fundas IWB se aseguren firmemente.
Especificaciones
- Cinturón Exterior:
- ONE-WRAP® ¾”
- Loop 1” & 1.5”
- Binding ¾”
- Tegris 12 Layer
- AustriAlpin D-Ring COBRA® ProStyle Buckle 1.75” 18kN*
- Webbing Type 13, 1-23/32”
- Cinturón Interior:
- 3610 Low Profile Loop 1.5”
- HTH Extruded Hook 841 1.5”
- Scuba Webbing 1.5”
Peso: Cinturón interior y exterior total
- Tamaño S: 12.9 oz.
- Tamaño M: 13.8 oz.
- Tamaño L: 14.7 oz.
- Tamaño XL: 16.8 oz.
*AVISO DE HEBILLA: La Regulación de Registro, Evaluación, Autorización y Restricción de Sustancias Químicas (Reglamento REACH) protege el medio ambiente contra los efectos nocivos de las sustancias químicas. Los cambios de 2023 a esta regulación pueden o no haber afectado visualmente la hebilla de nuestro cinturón V3. Esta mínima diferencia visual no afecta la funcionalidad del cinturón.
Compatibilidad:
- Todos los productos/pouches de tejido MOLLE
- Fundas con lazos para cinturón (Ej: Safariland® 6075UBL)
- Adaptadores de fundas modulares True North
Tallas:
**Mide la circunferencia de tu cintura para obtener las medidas correctas, no uses la talla de pantalón***
- Tamaño S: se ajusta a tamaños de cintura de 27”-32” (ajuste ideal 27”-31”) - 17 espacios MOLLE
- Tamaño M: se ajusta a tamaños de cintura de 31”-36” (ajuste ideal 31”-34”) - 20 espacios MOLLE
- Tamaño L: se ajusta a tamaños de cintura de 35”-41” (ajuste ideal 35”-39”) - 23 espacios MOLLE
- Tamaño XL: se ajusta a tamaños de cintura de 40”-50” (ajuste ideal 40”-46”) - 26 espacios MOLLE